From owner-freebsd-current Fri Oct 29 4:47:27 1999 Delivered-To: freebsd-current@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 4B79114C05; Fri, 29 Oct 1999 04:47:19 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id FAA13864; Fri, 29 Oct 1999 05:10:07 -0700 (PDT) Date: Fri, 29 Oct 1999 05:10:07 -0700 (PDT) From: Alfred Perlstein To: current@freebsd.org Cc: grog@freebsd.org Subject: (vinum?) lockups in strategy routines? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Anyone running -current as of Oct 28, 1999 getting lockups in device strategy routines? I thought I'd be able to get a dump but it didn't work. Specifically I'm running vinum in striping mode and the new ata-drivers. 10 Aug 1999 14:27:51.389915 stripe /dev/da0e /dev/da1e A kernel from Wed Oct 6 seems fine (able to buildworld). grog? :) I hope to get a crashdump soon, is there anything i can do help debug this in the meanwhile? Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #4: Wed Oct 27 06:56:03 PDT 1999 bright@thumper:/home/src/sys/compile/thumper Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183fbff real memory = 536858624 (524276K bytes) config> irq pcm0 5 avail memory = 517173248 (505052K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0355000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc035509c. Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vga-pci0: irq 16 at device 0.0 on pci1 isab0: at device 4.0 on pci0 isa0: on isab0 ata-pci0: at device 4.1 on pci0 ata-pci0: Busmastering DMA supported ata0 at 0x01f0 irq 14 on ata-pci0 chip1: irq 19 at device 4.2 on pci0 Timecounter "PIIX" frequency 3579545 Hz chip2: at device 4.3 on pci0 ahc0: irq 19 at device 6.0 on pci0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs bktr0: irq 17 at device 11.0 on pci0 iicbb0: on bti2c0 iicbus0: on iicbb0 master-only iicsmb0: on iicbus0 smbus0: on iicsmb0 smb0: on smbus0 iic0: on iicbus0 smbus1: on bti2c0 smb1: on smbus1 bktr0: Hauppauge Model 62471 A2 Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, dbx stereo. pci0: unknown card (vendor=0x109e, dev=0x0878) at 11.1 irq 17 fxp0: irq 16 at device 12.0 on pci0 fxp0: Ethernet address 00:90:27:3c:77:aa fdc0: at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pcm0: at port 0x220-0x22f irq 5 drq 3 flags 0x15 on isa0 ppc0 at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 vga0: at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A SMP: AP CPU #1 Launched! ad0: ATA-3 disk at ata0 as master ad0: 2442MB (5001696 sectors), 4962 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 0 depth queue, DMA Creating DISK ad0 Creating DISK wd0 Waiting 6 seconds for SCSI devices to settle Creating DISK da0 Creating DISK da1 Creating DISK cd0 Creating DISK cd1 changing root device to wd0s1a da0 at ahc0 bus 0 target 2 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8709MB (17836668 512 byte sectors: 255H 63S/T 1110C) da1 at ahc0 bus 0 target 4 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 8709MB (17836668 512 byte sectors: 255H 63S/T 1110C) WARNING: / was not properly dismounted vinum: loaded vinum: reading configuration from /dev/da0s1e vinum: updating configuration from /dev/da1s1e cd0 at ahc0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 16) cd0: cd present [213264 x 2048 byte records] cd1 at ahc0 bus 0 target 3 lun 0 cd1: Removable CD-ROM SCSI-2 device cd1: 8.333MB/s transfers (8.333MHz, offset 31) cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed kernel config: # Thumper machine "i386" cpu "I686_CPU" ident "thumper" maxusers 256 # Create a SMP capable kernel (mandatory options): options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O options NCPU=4 # number of CPUs options NBUS=5 # number of busses options NAPIC=2 # number of IO APICs options NINTR=25 # number of INTs options INVARIANTS options INCLUDE_CONFIG_FILE # Include this file in kernel #CPU/Machine Options options USER_LDT #allow user-level control of i386 ldt options KTRACE #kernel tracing options PERFMON options DDB options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to options P1003_1B options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L #File systems options FDESC #File descriptor filesystem options KERNFS #Kernel filesystem options UMAPFS #UID map filesystem options NULLFS #NULL filesystem options MFS #Memory File System options INET #InterNETworking options FFS #Berkeley Fast Filesystem options SOFTUPDATES options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=6000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console #options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #kernel tracing options SYSVSHM options SYSVSEM options SYSVMSG options MAXDSIZ=(256*1024*1024) options DFLDSIZ=(256*1024*1024) options ICMP_BANDLIM #config kernel root on wd0 #Devices controller isa0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 #IDE controller ata0 device atadisk0 # ATA disk drives device atapicd0 # ATAPI CDROM drives device atapifd0 # ATAPI floppy drives device atapist0 # ATAPI tape drives #SCSI controller scbus0 controller ahc0 device da0 device sa0 #SCSI tapes device cd0 #SCSI CD-ROMs device pass0 #Sound/PnP controller pnp0 device pcm0 at isa? port 0x220 irq 10 drq 3 flags 0x15 #Parrallel Port controller ppbus0 controller vpo0 at ppbus? device lpt0 at ppbus? device ppi0 at ppbus? controller ppc0 at isa? port ? irq 7 # syscons is the default console driver, resembling an SCO console device sc0 at isa? options SC_HISTORY_SIZE=200 # number of history buffer lines options SC_DISABLE_REBOOT # disable reboot key sequence # The keyboard controller; it controlls the keyboard and the PS/2 mouse. controller atkbdc0 at isa? port IO_KBD # The AT keyboard device atkbd0 at atkbdc? irq 1 # PS/2 mouse device psm0 at atkbdc? irq 12 # The video card driver. device vga0 at isa? port ? conflicts # Splash screen at start up! Screen savers require this too. pseudo-device splash device npx0 at nexus? port "IO_NPX" irq 13 # Laptop support (see LINT for more options) device apm0 at nexus? flags 0x31 # Advanced Power Management device sio0 at isa? port "IO_COM1" irq 4 device sio1 at isa? port "IO_COM2" irq 3 controller smbus0 device smb0 at smbus? controller iicbus0 controller iicbb0 device ic0 at iicbus? device iic0 at iicbus? device iicsmb0 at iicbus? device bktr0 device ed0 at pci? pseudo-device vn 4 pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 256 pseudo-device bpf 4 pseudo-device snp 4 pseudo-device gzip # Exec gzipped a.out's device fxp0 options INVARIANT_SUPPORT To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message