Date: Wed, 30 Jun 2004 22:18:00 +0300 From: INTERDATA <updates@interdata.lt> To: ia64@freebsd.org Subject: 5.2.1 on DL590/64 (460GX) Message-ID: <641120074.20040630221800@interdata.lt>
next in thread | raw e-mail | index | archive | help
Hi,
I've got some problems booting FreeBSD 5.2.1. At the end I've attached
a full terminal capture. Is this a problem with configuration or
current release just does not fully support this box? Could I help
developing this?
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Wed Feb 25 07:09:57 GMT 2004
root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xe0000000051d6000.
Preloaded mfs_root "/boot/mfsroot" at 0xe0000000051d60d0.
CPU: Merced (799.98-Mhz Itanium)
Origin = "GenuineIntel" Revision = 6
Features = 0x0
real memory = 2137833472 (2038 MB)
avail memory = 2063196160 (1967 MB)
FPSWA Revision = 0x10005, Entry = 0xe00000007f914050
Using ACPI2.0 table at 0xf4f60
acpi0: <COMPAQ SERVER_> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1208-0x120b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 6.0 (no driver attached)
pci0: <bridge, PCI-ISA> at device 7.0 (no driver attached)
atapci0: <Intel ICH UDMA66 controller> port 0x1000-0x100f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82372FB/82468GX USB controller> port 0x2400-0x241f irq 49 at device 7.2 on pci0
usb0: <Intel 82372FB/82468GX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.3 (no driver attached)
pci0: <base peripheral> at device 8.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 9.0 (no driver attached)
pci0: <base peripheral> at device 10.0 (no driver attached)
pci0: <bridge, HOST-PCI> at device 16.0 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci5: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.0 on pci5
pcib2: could not get PCI interrupt routing table for \_SB_.PCI1.S2F0 - AE_NOT_FOUND
pci6: <ACPI PCI bus> on pcib2
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x5000-0x503f mem 0xc0700000-0xc07fffff,0xc0601000-0xc0601fff irq 11 at device 4.0 on pci6
fxp0: Ethernet address 00:02:a5:5c:57:d8
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x5040-0x507f mem 0xc0900000-0xc09fffff,0xc0801000-0xc0801fff irq 11 at device 5.0 on pci6
fxp1: Ethernet address 00:02:a5:5c:57:d9
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci5: <base peripheral> at device 15.0 (no driver attached)
pcib3: <ACPI Host-PCI bridge> on acpi0
pci13: <ACPI PCI bus> on pcib3
pci13: <base peripheral> at device 15.0 (no driver attached)
pcib4: <ACPI Host-PCI bridge> on acpi0
pci17: <ACPI PCI bus> on pcib4
pci17: <base peripheral> at device 15.0 (no driver attached)
pcib5: <ACPI Host-PCI bridge> on acpi0
pci21: <ACPI PCI bus> on pcib5
pci21: <base peripheral> at device 15.0 (no driver attached)
pcib6: <ACPI Host-PCI bridge> on acpi0
pci25: <ACPI PCI bus> on pcib6
ida0: <Compaq Integrated Array controller> port 0xc000-0xc0ff mem 0x83000000-0x83ffffff,0x81000000-0x81ffffff irq 110 at device 8.0 on pci25
fatal kernel trap (cpu 0):
trap vector = 0x14 (Page Not Present)
cr.iip = 0xe000000004262230
cr.ipsr = 0x1210080a2010 (mfl,ic,dt,dfh,rt,cpl=0,it,ri=1,bn)
cr.isr = 0x20400000000 (code=0,vector=0,r,ei=1)
cr.ifa = 0xa00000013505810c
curthread = 0xe0000000048fbc50
pid = 0, comm = swapper
Stopped at ida_wait+0x151: [M1] ld8 r14=[r14]
db>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?641120074.20040630221800>