Date: Tue, 31 Oct 2006 20:17:12 -0800 From: David Sharp <daimon@dev-random.org> To: "M. Warner Losh" <imp@bsdimp.com> Cc: arm@freebsd.org Subject: Re: root on SD Message-ID: <20061101041712.GA902@mail.secure.net> In-Reply-To: <20061031.202623.1649769601.imp@bsdimp.com> References: <20061101014328.GB37930@mail.secure.net> <20061031.202623.1649769601.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2006.10.31 20:26:23 +0000, M. Warner Losh wrote: > : at91_mci0: Setting controller bus width to 1 > : SD CARD: 252968960 bytes > : at91_mci0: Setting controller bus width to 1 > : mmcsd0: <mmc or sd flash card> on mmc0 > : mmc0: setting transfer rate to 30.000MHz > : at91_mci0: Setting controller bus width to 1 > : Trying to mount root from ufs:mmcsd0s1a > > What does your /etc/fstab look like? What happens if you have boot > verbose set? /dev/mmcsd0s1a / ufs ro,noatime 1 1 this board still has some hardware issues i think. after turning on boot verbose i get SD CARD: 252968960 bytes at91_mci0: Setting controller bus width to 1 mmcsd0: <mmc or sd flash card> on mmc0 mmc0: setting transfer rate to 30.000MHz at91_mci0: Setting controller bus width to 1 Trying to mount root from ufs:mmcsd0s1a vm_fault(0xc01c9900, 0, 1, 0) -> 1 Fatal kernel mode data abort: 'Translation Fault (S)' trapframe: 0xc5723da8 FSR=00000005, FAR=00000000, spsr=600000d3 r0 =c08163a0, r1 =00000139, r2 =00000003, r3 =00000000 r4 =c0816548, r5 =c08163a0, r6 =00000003, r7 =c08163a0 r8 =c086523c, r9 =00002f36, r10=00000000, r11=c5723e10 r12=00000004, ssp=c5723df4, slr=c00612e0, pc =c00608fc vm_fault(0xc01c9900, 0, 2, 0) -> 1 Fatal kernel mode data abort: 'Translation Fault (S)' trapframe: 0xc5723b34 FSR=00000005, FAR=00000000, spsr=600000d3 r0 =00000000, r1 =00000000, r2 =c5723ba4, r3 =00000000 r4 =c5723ba4, r5 =c00608fc, r6 =c01cd454, r7 =c5723da8 r8 =00000005, r9 =c5723ef8, r10=00000000, r11=c5723b9c r12=c5723b80, ssp=c5723b80, slr=c00045e8, pc =c0001000 panic: Fatal abort Uptime: 1s Cannot dump. No dump device defined. vm_fault(0xc01c9900, 0, 1, 0) -> 1 Fatal kernel mode data abort: 'Translation Fault (S)' . . . also, something seems to be messed up with the MDIO on my board. the mac does not seem to be finding any phy. > > I'll check to make sure I've merged everything from p4... > > Warner >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061101041712.GA902>