Date: Thu, 20 Feb 2020 23:37:40 -0500 From: Isaac Mushinsky <itz@mushinsky.net> To: freebsd-x11@freebsd.org Subject: Artifacts on console Message-ID: <CAOR-76Y2wJLu9FRAA1wrTeky=vcrYBrTcTvVAAf560mC=7YK=w@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
https://photos.app.goo.gl/Tqvv19uva4Ge5tpv5 After X starts, I sometimes have this messed up area on my monitor on all non-x11 consoles. It goes away if I power flash the monitor but annoying nevertheless. Any ideas why and how to fix it? This happens sporadically, sometimes the problem is there, sometimes not. Nothing of interest I can see in either sddm or /var/log/messages (unless you point me what to look for). Setup: Intel Nuc8i7BEH FreeBSD 12.1 sddm, plasma5 Monitor: Dell UP2716D, 2560x1440 dmesg: Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE r354233 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 2560x1440 CPU: Intel(R) Core(TM) i7-8559U CPU @ 2.70GHz (2712.11-MHz K8-class CPU) Origin="GenuineIntel" Id=0x806ea Family=0x6 Model=0x8e Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33203019776 (31664 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL NUC8i7BE> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 on motherboard Launching APs: 1 2 6 4 5 3 7 Timecounter "TSC-low" frequency 1356057437 Hz quality 1000 random: entropy device external interface 000.000020 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd0 at kbdmux0 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <INTEL NUC8i7BE> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xbf000000-0xbfffffff,0x80000000-0x8fffffff at device 2.0 on pci0 vgapci0: Boot video device xhci0: <XHCI (generic) USB 3.0 controller> mem 0x404ac00000-0x404ac0ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <network> at device 20.3 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0xc0b24000-0xc0b25fff,0xc0b27000-0xc0b270ff,0xc0b26000-0xc0b267ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported ahcich2: <AHCI channel> at channel 2 on ahci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pcib2: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 0.0 on pci3 pci4: <PCI bus> on pcib4 pcib5: <PCI-PCI bridge> at device 1.0 on pci3 pcib5: [GIANT-LOCKED] pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci3 pci5: <ACPI PCI bus> on pcib6 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xbdf00000-0xbdf0ffff at device 0.0 on pci5 xhci1: 32 bytes context size, 64-bit DMA usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci6: <ACPI PCI bus> on pcib7 nvme0: <Generic NVMe Device> mem 0xc0a00000-0xc0a03fff at device 0.0 on pci6 pcib8: <ACPI PCI-PCI bridge> at device 29.6 on pci0 pcib8: [GIANT-LOCKED] pci7: <ACPI PCI bus> on pcib8 pci7: <unknown> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 hdac0: <Intel (0x9dc8) HDA Controller> mem 0xc0b20000-0xc0b23fff,0x404ab00000-0x404abfffff at device 31.3 on pci0 pci0: <serial bus> at device 31.5 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection> mem 0xc0b00000-0xc0b1ffff at device 31.6 on pci0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: 1c:69:7a:0d:a0:ae em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_syscontainer0: <System Container> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz1: _HOT value is absurd, ignored (-73.1C) atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec acpi_tz1: _TMP value is absurd, ignored (-263.1C) ugen1.1: <0x8086 XHCI root HUB> at usbus1 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 nvd0: <Samsung SSD 970 EVO Plus 250GB> NVMe namespace nvd0: 238475MB (488397168 512 byte sectors) hdacc0: <Realtek ALC235 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC235 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC235 (Front Analog)> at nid 33 and 25 on hdaa0 hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 pcm1: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 uhub0: 4 ports with 4 removable, self powered uhub1: 18 ports with 18 removable, self powered ada0 at ahcich2 bus 0 scbus0 target 0 lun 0 ada0: <ST2000LX001-1RG174 SDM1> ACS-3 ATA SATA 3.x device ada0: Serial Number ZDZ99PW4 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus1 usbus0 ugen1.2: <Cable Matters Inc. product 0x5442> at usbus1 ugen0.2: <vendor 0x0451 product 0x8142> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x0451 product 0x8142, class 9/0, rev 2.10/1.00, addr 1> on usbus0 uhub2: MTT enabled uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x04d9 USB Keyboard> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/2.09, addr 2> on usbus0 kbd1 at ukbd0 ugen0.4: <vendor 0x04f2 USB Optical Mouse> at usbus0 Root mount waiting for: usbus0 ugen0.5: <vendor 0x0451 product 0x8142> at usbus0 uhub3 on uhub2 uhub3: <vendor 0x0451 product 0x8142, class 9/0, rev 2.10/1.00, addr 4> on usbus0 uhub3: MTT enabled Root mount waiting for: usbus0 uhub3: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.6: <Texas Instruments Texas Instruments USBtoI2C Solution> at usbus0 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [drm] Found 128MB of eDRAM Failed to add WC MTRR for [0x80000000-0x8fffffff]: -22; performance may suffer [drm] Got stolen memory base 0x7c000000, size 0x4000000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] Connector eDP-1: get mode from tunables: [drm] - kern.vt.fb.modes.eDP-1 [drm] - kern.vt.fb.default_mode [drm] failed to retrieve link info, disabling eDP [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-2: get mode from tunables: [drm] - kern.vt.fb.modes.DP-2 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "fb". start FB_INFO: type=11 height=1440 width=2560 depth=32 cmsize=16 size=14745600 pbase=0x80040000 vbase=0xfffff80080040000 name=drmn0 flags=0x0 stride=10240 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: inteldrmfb frame buffer device drmn0: successfully loaded firmware image with name: i915/kbl_dmc_ver1_04.bin [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) lo0: link state changed to UP em0: link state changed to UP ums0 on uhub2 ums0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/2.09, addr 2> on usbus0 ums1 on uhub2 ums1: <vendor 0x04f2 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 3> on usbus0 ums1: 3 buttons and [XYZ] coordinates ID=0 uhid0 on uhub2 uhid0: <Texas Instruments Texas Instruments USBtoI2C Solution, class 0/0, rev 1.10/1.00, addr 5> on usbus0 Security policy loaded: MAC/ntpd (mac_ntpd) [itz@nuc0 ~]$
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAOR-76Y2wJLu9FRAA1wrTeky=vcrYBrTcTvVAAf560mC=7YK=w>