Date: Sun, 28 Apr 1996 12:44:10 -0700 (PDT) From: Dan Busarow <dan@dpcsys.com> To: Peter da Silva <peter@taronga.com> Cc: scsi@freebsd.org Subject: Re: Anaconda Update Message-ID: <Pine.SV4.3.91.960428123322.12821A-100000@cedb> In-Reply-To: <199604281609.LAA17615@bonkers.taronga.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 28 Apr 1996, Peter da Silva wrote:
> Backups using DUMP have no problem writing to the whole tape. But when
> I tried AMANDA I got:
I just picked up an Anaconda from CSC myself. Running 2.1.0R with an
AH1542C. I'm getting medium errors and write errors fairly quickly
(less than 100K), dump reports end of medium.
Searching through the lists on www.freebsd.org I found several threads
on this drive but no answers. Except for a cryptic "once I figured out
active termination" that doesn't describe what needed to be done.
Could anyone elaborate on what it takes to get this drive/controller
working? I'm also planning on using it in conjuntion with Amanda.
dmesg output attached.
Thanks,
Dan
--
Dan Busarow
DPC Systems
Dana Point, California
FreeBSD 2.1.0-RELEASE #0: Fri Apr 26 12:06:09 PDT 1996
root@saltcreek.beach.net:/usr/src/sys/compile/Beach-1
CPU: i486 DX2 (486-class CPU)
Origin = "GenuineIntel" Id = 0x435 Stepping=5
Features=0x3<FPU,VME>
real memory = 8388608 (8192K bytes)
avail memory = 6549504 (6396K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 at 0x300-0x31f irq 5 on isa
ed1: address 00:40:05:16:78:82, type NE2000 (16 bit)
cy0 irq 10 maddr 0xd4000 msize 8192 on isa
sio0 not found at 0x3f8
sio1 not found at 0x2f8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
mse0: wrong signature ff
mse0 not found at 0x23c
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 7540 AV>
wd0: 514MB (1054368 sectors), 1046 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
bt0 not found at 0x330
uha0 not found at 0x330
ahc1 not found
ahb0 not found
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0 waiting for scsi devices to settle
(aha0:0:0): "CONNER CFP1060S 1.05GB 2035" type 0 fixed SCSI 2
sd0(aha0:0:0): Direct-Access 1013MB (2074880 512 byte sectors)
(aha0:6:0): "ARCHIVE ANCDA 2750 28077 -002" type 1 removable SCSI 2
st0(aha0:6:0): Sequential-Access density code 0x0, drive empty
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not probed due to I/O address conflict with ed1 at 0x300
mcd0 not probed due to I/O address conflict with ed1 at 0x300
mcd1: timeout getting status
mcd1 not found at 0x340
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0 not found at 0x360
ep0 not probed due to I/O address conflict with ed1 at 0x300
ix0 not probed due to I/O address conflict with ed1 at 0x300
le0 not probed due to I/O address conflict with ed1 at 0x300
lnc0 not found at 0x280
lnc1 not probed due to I/O address conflict with ed1 at 0x300
ze0 not probed due to I/O address conflict with ed1 at 0x300
zp0 not probed due to I/O address conflict with ed1 at 0x300
npx0 on motherboard
npx0: INT 16 interface
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SV4.3.91.960428123322.12821A-100000>