From owner-freebsd-questions Fri Feb 11 7:36:26 2000 Delivered-To: freebsd-questions@freebsd.org Received: from www.geocrawler.com (sourceforge.net [198.186.203.33]) by builder.freebsd.org (Postfix) with ESMTP id 0DB0A470D for ; Fri, 11 Feb 2000 07:36:22 -0800 (PST) Received: (from nobody@localhost) by www.geocrawler.com (8.9.3/8.9.3) id HAA04661; Fri, 11 Feb 2000 07:36:06 -0800 Date: Fri, 11 Feb 2000 07:36:06 -0800 Message-Id: <200002111536.HAA04661@www.geocrawler.com> To: freebsd-questions@freebsd.org Subject: smart array works CD doesn't From: "Francis Abella" Reply-To: "Francis Abella" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This message was sent from Geocrawler.com by "Francis Abella" Be sure to reply to that address. Thanks to everyone who helped get my Smart Array 221 recognized by FreeBSD! dropped: ----------------------------------------------- controller ida0 at pci0 bio irq 11 vector idaintr controller ida0 disk id0 at ida0 drive 0 disk id1 at ida0 drive 1 disk id2 at ida0 drive 2 disk id3 at ida0 drive 3 options IDA_CUCKOO_MODE=0 ------------------------------------------- into my kernel & my IDE CD-ROM isn't recognized by FreeBSD. I do get : ida : port address (0xffffffff) out of range ida0 not found on the boot & have a feeling this somehow relates to my woes. does anyone have any ideas on how I get my CD-ROM working? I have: CPQ Proliant 1600 7/500 w/ 256MB RAM 4 - 9 GB Plug w/ultra 2 SCSI HD's 1 - in an array by itself as a "boot drive" (RAID0) 3 - in an array at RAID5 these are running on CPQ Smart Array 221 (on slot 4, bus 2) an embedded IDE Controller (enabled as 2nd controller [floppy is first on another embedded IDE controller]) running the CPQ CDR-8435 CD-ROM on IRQ 14 Any help would be greatly appreciated! TYIA Geocrawler.com - The Knowledge Archive To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message