Date: Wed, 14 Nov 2018 07:01:14 +0900 (JST) From: Mori Hiroki <yamori813@yahoo.co.jp> To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: BCM/mips still hang up Message-ID: <386566.36409.qm@web103917.mail.ssk.yahoo.co.jp> References: <376089.55679.qm@web103915.mail.ssk.yahoo.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi.=0A=0AI found may be same problem cns11xx(arm) before.=0A=0AI think this= problem cuase of uart and interrupt.=0A=0AOld Rays code work on fine on BC= M/mips. But same=0Atime that have same hang up problem. I doubt=0Amerge INT= ERNG in system.=0A=0AThanks=0A=0AHiroki Mori=0A=0A----- Original Message --= ---=0A> From: Mori Hiroki <yamori813@yahoo.co.jp>=0A> To: "freebsd-mips@fre= ebsd.org" <freebsd-mips@freebsd.org>=0A> Cc: =0A> Date: 2018/11/12, Mon 14:= 26=0A> Subject: BCM/mips still hang up=0A> =0A> Hi=0A> =0A> I try to=A012.0= -BETA4 on BCM5351 & BCM5352. It sill hang up on boot.=0A> This log.=0A> =0A= > entry: mips_init()=0A> Cache info:=0A> =A0 picache_stride=A0 =A0 =3D 4096= =0A> =A0 picache_loopcount =3D 4=0A> =A0 pdcache_stride=A0 =A0 =3D 4096=0A>= =A0 pdcache_loopcount =3D 2=0A> =A0 max line size =A0 =A0 =3D 16=0A> cpu0:= Broadcom processor v8.144=0A> =A0 MMU: Standard TLB, 32 entries (1K 4K 16K= 64K 256K 1M 16M 64M 256M pg sizes)=0A> =A0 L1 i-cache: 2 ways of 512 sets,= 16 bytes per line=0A> =A0 L1 d-cache: 2 ways of 256 sets, 16 bytes per lin= e=0A> =A0 L2 cache: disabled=0A> =A0 Config1=3D0x3ed94c82<EJTAG>=0A> ---<<B= OOT>>---=0A> KDB: debugger backends: ddb=0A> KDB: current backend: ddb=0A> = Copyright (c) 1992-2018 The FreeBSD Project.=0A> Copyright (c) 1979, 1980, = 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A> The Regents of the Unive= rsity of California. All rights reserved.=0A> FreeBSD is a registered trade= mark of The FreeBSD Foundation.=0A> FreeBSD 12.0-BETA4 e78279655eb(stable/1= 2) Buffalo_WHR-HP-G54 mips=0A> gcc version 4.2.1 20070831 patched [FreeBSD]= =0A> real memory=A0 =3D 16109568 (15732K bytes)=0A> avail memory =3D 112762= 88 (10MB)=0A> arc4random: no preloaded entropy cache=0A> random: entropy de= vice external interface=0A> nexus0: <MIPS32 root nexus>=0A> bhnd_nvram0: <B= roadcom> on nexus0=0A> bhnd0: <BCM5352 SIBA bus> at mem 0x18000000-0x180fff= ff on nexus0=0A> bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 14> = mem =0A> 0x18000000-0x18000dff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,= 0x1a000000-0x1bffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff =0A> irq = 8 at core 0 on bhnd0=0A> gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0= x18000dff on bhnd_chipc0=0A> gpiobus0: <GPIO bus> on gpio0=0A> cpupic0: <MI= PS32 Interrupt Controller> on nexus0=0A> bcm_mips0: <Broadcom BMIPS33 CPU, = rev 6> mem =0A> 0x18002000-0x18002dff,0x18002f00-0x18002fff,0x18002e00-0x18= 002eff irq 10 at core =0A> 2 on bhnd0=0A> bhnd_pwrctl0: <ChipCommon Power C= ontrol> on bhnd_chipc0=0A> clock0: <Generic MIPS32 ticker> on nexus0=0A> Ti= mecounter "MIPS32" frequency 100000000 Hz quality 800=0A> Event timer "MIPS= 32" frequency 100000000 Hz quality 800=0A> gpioc0: <GPIO controller> on gpi= o0=0A> uart0: <16750 or compatible> mem 0x18000300-0x180003ff irq 13 on =0A= > bhnd_chipc0=0A> uart0: console (115200,n,8,1)=0A> uart1: <16750 or compat= ible> mem 0x18000400-0x180004ff irq 14 on =0A> bhnd_chipc0=0A> cfi1: <Broad= com ChipCommon CFI> mem =0A> 0x1c000000-0x1dffffff,0x18000040-0x1800004b on= bhnd_chipc0=0A> cfid0 on cfi1=0A> bhnd0: <Broadcom Fast Ethernet MAC, rev = 9> mem =0A> 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001e= ff irq 9 at core =0A> 1 (no driver attached)=0A> bhnd0: <Broadcom USB 1.1 H= ost Controller, rev 2> mem =0A> 0x18003000-0x18003dff,0x18003f00-0x18003fff= ,0x18003e00-0x18003eff irq 11 at core =0A> 3 (no driver attached)=0A> bhnd0= : <Broadcom MEMC SDRAM Controller, rev 1> mem =0A> 0x18004000-0x18004dff,0-= 0x7ffffff,0x10000000-0x17ffffff,0x80000000-0x9fffffff,0x18004f00-0x18004fff= ,0x18004e00-0x18004eff =0A> at core 4 (no driver attached)=0A> bhnd0: <Broa= dcom 802.11 MAC/PHY/Radio, rev 9> mem =0A> 0x18005000-0x18005dff,0x18005f00= -0x18005fff,0x18005e00-0x18005eff irq 12 at core =0A> 5 (no driver attached= )=0A> bhnd0: <Broadcom RoboSwitch, rev 2> mem =0A> 0x18006000-0x18006dff,0x= 18006f00-0x18006fff,0x18006e00-0x18006eff at core 6 (no =0A> driver attache= d)=0A> cfi0 at mem 0x1c000000-0x1dffffff on nexus0=0A> nexus_alloc_resource= : could not reserve resource for cfi0=0A> device_attach: cfi0 attach return= ed 6=0A> Timecounters tick every 10.000 msec=0A> Trying to mount root from = cd9660:/dev/map/rootfs.uzip []...=0A> Warning: no time-of-day clock registe= red, system time will not be set accurately=0A> kern.coredump:=A0=0A> _____= __________________________________________=0A> freebsd-mips@freebsd.org mai= ling list=0A> https://lists.freebsd.org/mailman/listinfo/freebsd-mips=0A>; T= o unsubscribe, send any mail to =0A> "freebsd-mips-unsubscribe@freebsd.org"= =0A>=0A
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?386566.36409.qm>