Date: Mon, 9 Feb 2004 01:28:09 -0800 From: Jim Blomo <jblomo@berkeley.edu> To: freebsd-questions@freebsd.org Subject: problems reading compactflash with USB Message-ID: <20040209092809.GA676@Blackfoot.kicks-ass.org>
next in thread | raw e-mail | index | archive | help
Hi, thanks for listening. I have USB card reader that has worked in both linux and windows. It is being recognized during boot time on my 4.9-RELEASE machine: ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdff5c000-0xdff5cfff irq 10 at device 20.0 on pci0 usb1: OHCI version 1.0, legacy support usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered umass0: CYPRESS SM-CF 0.78 CYPRESS SM-CF 0.78, rev 1.10/0.78, addr 3 The reader has a formated card in it (with pictures from a powershot a70). However, further on down in the boot process I run into errors: da0 at umass-sim0 bus 0 target 0 lun 0 da0: <CYPRESS SM-CF 0.78 > Removable Direct Access SCSI-0 device da0: 650KB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present When I try to mount the device, # mount -t msdos /dev/da1s1 /mnt/ (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present msdos: /dev/da1s1: Device not configured I get this exact same error trying to do anything with the disk, including fdisk, newfs, newfs_msdos, or trying to mount any other partition. I've tried to use camcontrol to scan for new devices without any luck: # camcontrol inquiry 0:0 camcontrol: cam_open_btl: no passthrough device found at 0:0:0 I can't really get any infromation from the device to see if it needs to have some quirk rules added. # usbdevs -v Controller /dev/usb0: addr 1: self powered, config 1, OHCI root hub(0x0000), AcerLabs(0x0000), rev 1.00 port 1 powered port 2 powered I'm using # uname -a FreeBSD Blackfoot 4.9-RELEASE FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003 root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC i386 I'm not sure where to go from here, and any advice would be greatly appreciated. Please CC me on replies, as I'm not subscribed to this list. Jim Blomo
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040209092809.GA676>