Date: Mon, 02 Jul 2001 04:20:03 -0700 From: W Gerald Hicks <gehicks@pacbell.net> To: Adam Garcia <Adamgarcia@netzero.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: if_stereg.h patch for D-LINK 530TX+ ? (was: no subject) Message-ID: <0GFU00K42FHOCM@mta3.snfc21.pbi.net> In-Reply-To: <KLEPKBLNOBCLOGGKBNPJAECJCAAA.Adamgarcia@netzero.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail-940389088-1 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; format=flowed; charset=windows-1252 Hi Adam, (Next time please help the search engines and others by giving a meaningful subject line :-) Not sure if there have been material changes in the chip since wpaul wrote the driver but give the attached patch a whirl. Hope it helps, W Gerald Hicks gehicks@pacbell.net <Attachment missing> On Monday, July 2, 2001, at 03:59 AM, Adam Garcia wrote: > Hello, > > =A0I=92ve just installed FreeBSD 4.3 stable in a k62 350 MHZ machine = with 128 > MB of Ram, a voodoo 3 card and 2 d-link dfe 530tx + Ethernet cards. = I've > been using the FreeBSD handbook as a reference point to configure the > machine to be a firewall/router; I've also been reading the Pedantic = PPP > primer but I still can't configure the nic's. I've successfully = recompiled > the kernel to include options IPFIREWALL, and NETGRAPH, IPDIVERT and > IPFILTER. The driver for the card is the vr line in the kernel. I = didn't > comment out the other nics because of a few failed make's so I left = them=20 > as > is and it recompiled and installed fine. I looked at the dmesg output = by > running "dmesg | less" and that said: > pci0: <unknown card> (vendor=3D0x1186, dev=3D0,1300) at 9.0 irq 5 > pci0: <unknown card> (vendor=3D0x1186, dev=3D0,1300) at 11.0 irq 10 > so I=92m assuming they aren't seen by FreeBSD, now what should I do? > > =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0 Thanks in advance > --Apple-Mail-940389088-1 Content-Type: multipart/mixed; boundary=Apple-Mail-475994521-2 --Apple-Mail-475994521-2 Content-Transfer-Encoding: 7bit Content-Type: text/enriched; charset=us-ascii Hi Adam, (Next time please help the search engines and others by giving a meaningful subject line :-) Not sure if there have been material changes in the chip since wpaul wrote the driver but give the attached patch a whirl. Hope it helps, W Gerald Hicks gehicks@pacbell.net --Apple-Mail-475994521-2 Content-Disposition: attachment; filename="if_stereg.h.patch" Content-Type: application/octet-stream; name="if_stereg.h.patch"; x-unix-mode=0644 Content-Transfer-Encoding: 7bit --- src/sys/pci/if_stereg.h.orig Tue Dec 7 12:14:42 1999 +++ src/sys/pci/if_stereg.h Mon Jul 2 04:18:31 2001 @@ -43,7 +43,7 @@ * D-Link PCI device/vendor ID for the DFE-550TX. */ #define DL_VENDORID 0x1186 -#define DL_DEVICEID_550TX 0x1002 +#define DL_DEVICEID_550TX 0x1300 /* * Register definitions for the Sundance Technologies ST201 PCI --Apple-Mail-475994521-2 Content-Transfer-Encoding: quoted-printable Content-Type: text/enriched; charset=windows-1252 On Monday, July 2, 2001, at 03:59 AM, Adam Garcia wrote: = <excerpt><fontfamily><param>Arial</param><color><param>0000,0000,0000</par= am><smaller>Hello, =A0I=92ve just installed FreeBSD 4.3 stable in a k62 350 MHZ machine = with 128 MB of Ram, a voodoo 3 card and 2 d-link dfe 530tx + Ethernet cards. I've been using the FreeBSD handbook as a reference point to configure the machine to be a firewall/router; I've also been reading the Pedantic PPP primer but I still can't configure the nic's. I've successfully recompiled the kernel to include options IPFIREWALL, and NETGRAPH, IPDIVERT and IPFILTER. The driver for the card is the vr line in the kernel. I didn't comment out the other nics because of a few failed make's so I left them as is and it recompiled and installed fine. I looked at the dmesg output by running "dmesg | less" and that said: pci0: <<unknown card> (vendor=3D0x1186, dev=3D0,1300) at 9.0 irq 5 pci0: <<unknown card> (vendor=3D0x1186, dev=3D0,1300) at 11.0 irq 10 so I=92m assuming they aren't seen by FreeBSD, now what should I do? =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0 Thanks in advance</smaller></color></fontfamily> </excerpt>= --Apple-Mail-475994521-2-- --Apple-Mail-940389088-1-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0GFU00K42FHOCM>