Date: Mon, 06 Jun 2005 10:27:54 +0200 From: Andreas Kohn <andreas.kohn@gmx.net> To: freebsd-alpha@freebsd.org Subject: Machine Check 6.0-SNAP004 with TGA 21030 Message-ID: <1118046474.20106.7.camel@klamath.syndrom23.de>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi,
FYI, I tried the new bootonly SNAP004 of June on my AlphaStation 4/200,
and got a machine check again with a TGA2:
---------------------8<-----------------
>>>boot dka200 -flags h
(boot dka200.2.0.6.0 -flags h)
block 0 of dka200.2.0.6.0 is a valid boot block
reading 407 blocks from dka200.2.0.6.0
bootstrap code read in
base = 1f2000, image_start = 0, image_bytes = 32e00
initializing HWRPB at 2000
initializing page table at 1e4000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Consoles: SRM firmware console
VMS PAL rev: 0x1000000010538
OSF PAL rev: 0x100000002012e
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@ds10.freebie.xs4all.nl, Sat Jun 4 17:49:26 UTC 2005)
Memory: 131072 k
dka200.2.0.6.0 is not ready
[...]
dka200.2.0.6.0 is not ready
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5fad10+0x46890 syms=[0x8+0x6d4e8+0x8+0x5937e]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc000034bbb0...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6-CURRENT-SNAP004 #0: Sat Jun 4 20:41:35 UTC 2005
root@ds10.freebie.xs4all.nl:/usr/obj/usr/src/sys/GENERIC
AlphaStation 200/400 ("Avanti")
AlphaStation 200 4/100, 100MHz
8192 byte page size, 1 processor.
CPU: EV4 (21064) major=2 minor=0
OSF PAL rev: 0x100000002012e
real memory = 132169728 (126 MB)
avail memory = 115507200 (110 MB)
apecs0: <DECchip 21071 Core Logic chipset>
pcib0: <2107x PCI host bus adapter> on apecs0
pci0: <PCI bus> on pcib0
sym0: <810> port 0x10000-0x100ff mem 0x82040000-0x820400ff irq 11 at
device 6.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at ISA irq 11
sym0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem
0x82040100-0x8204017f irq 5 at device 11.0 on pci0
de0: interrupting at ISA irq 5
de0: [GIANT-LOCKED]
de0: DEC 21040 [10Mb/s] pass 2.3
de0: Ethernet address: 08:00:2b:e4:f5:af
de0: if_start running deferred for Giant
tga0: <DEC TGA (21030) 2D Graphics Accelerator> mem
0x88000000-0x8fffffff irq 9 at device 13.0 on pci0
unexpected machine check:
mces = 0x1
vector = 0x660
param = 0xfffffc0000006000
pc = 0xfffffc0000763594
ra = 0xfffffc0000768d00
curproc = 0xfffffc00009057f8
pid = 0, comm = swapper
[thread pid 0 tid 0 ]
Stopped at tga_init+0x74: and t0,#0x1c,t1
<t0=0x55555455,t1=0xfffffe0000016000>
db>
--------------------->8-----------------
The system has NetBSD on it currently, so I for testing I would have to
build releases on my i386.
Regards,
Andreas
--
[-- Attachment #2 --]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (FreeBSD)
iD8DBQBCpAkKYucd7Ow1ygwRAjQGAJ9lnUoix0gm6yg7x3nr4OsC1dMH+wCfdshM
eKZlYEMhyQG7FoY/5IKydqM=
=Aanb
-----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1118046474.20106.7.camel>