Date: Wed, 18 Jan 2012 21:52:37 -0500 From: Super Bisquit <superbisquit@gmail.com> To: Justin Hibbits <chmeeedalf@gmail.com> Cc: FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> Subject: Re: Has source been updated with Hibbits' recent patches? Message-ID: <CA%2BWntOvfJyXq2Ev%2BEAHS2GoiOX7qgpvfNb0uDW8WJ9TFvY9jNA@mail.gmail.com> In-Reply-To: <CA%2BWntOt-MgYmuYjCgnbkUpyPmpWXgRM1UababbR8VabaYrP-Zw@mail.gmail.com> References: <CA%2BWntOuBdgcXow13BtfgVLfD3Bj0gT-WJ55X5HfUHoXxx7GD9Q@mail.gmail.com> <6B0E21DA-728B-43ED-8194-76D48A65B885@gmail.com> <CA%2BWntOt-MgYmuYjCgnbkUpyPmpWXgRM1UababbR8VabaYrP-Zw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I've successfully applied the patches. Now, is the next step rebuilding the
kernel?
tima# kldstat
Id Refs Address Size Name
1 24 0x100000 923e20 kernel
2 1 0xd1480000 1d000 if_wi.ko
3 9 0xd149d000 7a000 wlan.ko
4 1 0xd1523000 13000 wlan_acl.ko
5 1 0xd1536000 12000 wlan_amrr.ko
6 1 0xd1548000 17000 wlan_ccmp.ko
7 1 0xd155f000 12000 wlan_rssadapt.ko
8 1 0xd1571000 14000 wlan_tkip.ko
9 1 0xd1585000 12000 wlan_wep.ko
10 1 0xd1597000 11000 wlan_xauth.ko
tima# ifconfig -a
usbus0: flags=10001<UP> metric 0 mtu 0
usbus1: flags=10001<UP> metric 0 mtu 0
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:0a:95:93:a8:20
ch 1 dma -1
gem0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
ether 00:0a:95:93:a8:20
inet 98.211.76.206 netmask 0xfffffc00 broadcast 255.255.255.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
tima# dmesg|grep miibus
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
interface miibus.1 already present in the KLD 'kernel'!
tima# pciconf -l -b
hostb0@pci0:0:11:0: class=0x060000 card=0x00000000 chip=0x0027106b
rev=0x00 hdr=0x00
vgapci0@pci0:0:16:0: class=0x030000 card=0x00000000 chip=0x011010de
rev=0xb2 hdr=0x00
bar [10] = type Memory, range 32, base 0x91000000, size 16777216,
enabled
bar [14] = type Prefetchable Memory, range 32, base 0x98000000, size
134217728, enabled
macio0@pci1:0:23:0: class=0xff0000 card=0x00000000 chip=0x0025106b
rev=0x00 hdr=0x00
bar [10] = type Memory, range 32, base 0x80000000, size 524288,
enabled
ohci0@pci1:0:24:0: class=0x0c0310 card=0x00000000 chip=0x0026106b
rev=0x00 hdr=0x00
bar [10] = type Memory, range 32, base 0x80081000, size 4096, enabled
ohci1@pci1:0:25:0: class=0x0c0310 card=0x00000000 chip=0x0026106b
rev=0x00 hdr=0x00
bar [10] = type Memory, range 32, base 0x80080000, size 4096, enabled
hostb1@pci1:0:11:0: class=0x060000 card=0x00000000 chip=0x0028106b
rev=0x00 hdr=0x00
fwohci0@pci2:0:14:0: class=0x0c0010 card=0x0030106b chip=0x0030106b
rev=0x00 hdr=0x00
bar [10] = type Memory, range 32, base 0xf5000000, size 4096, enabled
gem0@pci2:0:15:0: class=0x020000 card=0x00000000 chip=0x0024106b
rev=0x00 hdr=0x00
bar [10] = type Memory, range 32, base 0xf5200000, size 2097152,
enabled
hostb2@pci2:0:11:0: class=0x060000 card=0x00000000 chip=0x0029106b
rev=0x00 hdr=0x00
ima# ifconfig wlan create wlandev gem0
ifconfig: SIOCIFCREATE2: Device not configured
tima#
Unfortunately, I'm having trouble creating the interface.
I haven't rebuilt the kernel for the ofw brightness patch.
On Tue, Jan 17, 2012 at 7:37 PM, Super Bisquit <superbisquit@gmail.com>wrote:
> I should have an internet connection up again in the next few days. I
> downloaded the two files.
> Wow. Nobody? That blows.
> Give me a few days or less to get back to you.
>
> On 1/17/12, Justin Hibbits <chmeeedalf@gmail.com> wrote:
> > On Jan 17, 2012, at 5:19 PM, Super Bisquit wrote:
> >
> >> I'm referring to the AirPort and tty/syscons brightness patches.
> >
> > No. The brightness patch may or may not go in. The Airport patch
> > will go in once I get some test results (have you tested it?).
> > Nobody's given me any test results, and last time I tried I was having
> > issues (attached fine, but couldn't send/receive). Haven't looked at
> > it in a couple months though.
> >
> > - Justin
> >
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BWntOvfJyXq2Ev%2BEAHS2GoiOX7qgpvfNb0uDW8WJ9TFvY9jNA>