From owner-freebsd-hardware Mon Mar 31 17:46:08 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id RAA27630 for hardware-outgoing; Mon, 31 Mar 1997 17:46:08 -0800 (PST) Received: from 586quick166.saturn-tech.com ([207.229.19.32]) by freefall.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA27615 for ; Mon, 31 Mar 1997 17:45:56 -0800 (PST) Received: from localhost (drussell@localhost) by 586quick166.saturn-tech.com (8.8.4/8.8.4) with SMTP id SAA12932; Mon, 31 Mar 1997 18:45:33 -0700 (MST) X-Authentication-Warning: 586quick166.saturn-tech.com: drussell owned process doing -bs Date: Mon, 31 Mar 1997 18:45:33 -0700 (MST) From: Doug Russell To: Howard Lew cc: Paul Southworth , freebsd-hardware@freebsd.org Subject: Re: Crashes with 6x86L-P200+ In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-hardware@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Mon, 31 Mar 1997, Howard Lew wrote: > I don't have any info about MTI's MB (because we do not sell it), but the > 6x86L parts run at 2.8V instead of 3.3V or 3.52V. The wrong voltage can > cause this problem. I think 3.3V is the "absolute worst case" voltage for > the chip, so if you are running it at 3.3V this is very bad for the chip > and you may get this problem. (You should not jumper the cpu for regular > 3.3V). I was wondering about that... I haven't been able to get my hands on an L part to play with yet, but I noticed that the last couple revisions of the motherboard we use (Gigabyte 586VX) have a setting for the 2.8 volt CPUs.... I wanted to try one and see how much cooler they ran. Later......