Date: Wed, 8 Dec 1999 12:40:03 -0800 (PST) From: Marcin Cieslak <saper@system.pl> To: freebsd-ports@FreeBSD.org Subject: Re: kern/15355 Message-ID: <199912082040.MAA73655@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR ports/15355; it has been noted by GNATS.
From: Marcin Cieslak <saper@system.pl>
To: "Justin T. Gibbs" <gibbs@FreeBSD.ORG>
Cc: FreeBSD-gnats-submit@FreeBSD.ORG
Subject: Re: kern/15355
Date: Wed, 8 Dec 1999 20:34:10 +0100 (MET)
On Wed, 8 Dec 1999, Justin T. Gibbs wrote:
> Can you verify that you have:
No, I had not.
>
> $FreeBSD: src/sys/pci/ahc_pci.c,v 1.22 1999/12/06 18:29:03 gibbs Exp $
I have upgraded, but the problem still persits.
Strangely, when I boot with serial console, things are okay!!!!
So I have increased the console buffer and tried to spot differences
between kernel outputs with my eye, and I noticed one difference
in ahc1 termination.
I enclose the shar'ed files below.
--
<< Marcin Cieslak // saper@system.pl >>
-----------------------------------------------------------------
SYSTEM Internet Provider http://www.system.pl
# This is a shell archive. Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file". Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
# ahc_debug
# ahc_debug/Barbera
# ahc_debug/boot-v
# ahc_debug/boot-hv
# ahc_debug/diff
# ahc_debug/README
#
echo c - ahc_debug
mkdir -p ahc_debug > /dev/null 2>&1
echo x - ahc_debug/Barbera
sed 's/^X//' >ahc_debug/Barbera << 'END-of-ahc_debug/Barbera'
X#
X# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
X#
X# For more information on this file, please read the handbook section on
X# Kernel Configuration Files:
X#
X# http://www.freebsd.org/handbook/kernelconfig-config.html
X#
X# The handbook is also available locally in /usr/share/doc/handbook
X# if you've installed the doc distribution, otherwise always see the
X# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
X# latest information.
X#
X# An exhaustive list of options and more detailed explanations of the
X# device lines is also present in the ./LINT configuration file. If you are
X# in doubt as to the purpose or necessity of a line, check first in LINT.
X#
X# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.208 1999/12/03 00:16:20 msmith Exp $
X
Xmachine i386
X#cpu I386_CPU
X#cpu I486_CPU
Xcpu I586_CPU
Xcpu I686_CPU
Xident Barbera
Xmaxusers 100
X
X#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
X
Xoptions MATH_EMULATE #Support for x87 emulation
Xoptions INET #InterNETworking
Xoptions FFS #Berkeley Fast Filesystem
Xoptions FFS_ROOT #FFS usable as root device [keep this!]
Xoptions MD_ROOT #MD is a potential root device
Xoptions MFS #Memory Filesystem
Xoptions NFS #Network Filesystem
Xoptions NFS_ROOT #NFS usable as root device, "NFS" req'ed
Xoptions MSDOSFS #MSDOS Filesystem
Xoptions CD9660 #ISO 9660 Filesystem
Xoptions CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed
Xoptions PROCFS #Process filesystem
Xoptions COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
Xoptions SCSI_DELAY=30000 #Be pessimistic about Joe SCSI device
Xoptions UCONSOLE #Allow users to grab the console
Xoptions USERCONFIG #boot -c editor
Xoptions VISUAL_USERCONFIG #visual boot -c editor
Xoptions KTRACE #ktrace(1) syscall trace support
Xoptions SYSVSHM #SYSV-style shared memory
Xoptions SYSVMSG #SYSV-style message queues
Xoptions SYSVSEM #SYSV-style semaphores
X
X# To make an SMP kernel, the next two are needed
X#options SMP # Symmetric MultiProcessor Kernel
X#options APIC_IO # Symmetric (APIC) I/O
X# Optionally these may need tweaked, (defaults shown):
X#options NCPU=2 # number of CPUs
X#options NBUS=4 # number of busses
X#options NAPIC=1 # number of IO APICs
X#options NINTR=24 # number of INTs
X
Xcontroller isa0
Xcontroller pnp0 # PnP support for ISA
Xcontroller eisa0
Xcontroller pci0
X
X# Floppy drives
Xcontroller fdc0 at isa? port IO_FD1 irq 6 drq 2
Xdevice fd0 at fdc0 drive 0
Xdevice fd1 at fdc0 drive 1
X
X# IDE controller and disks
Xcontroller wdc0 at isa? port IO_WD1 irq 14 disable
Xdevice wd0 at wdc0 drive 0
X#device wd1 at wdc0 drive 1
X
Xcontroller wdc1 at isa? port IO_WD2 irq 15 disable
X#device wd2 at wdc1 drive 0
X#device wd3 at wdc1 drive 1
X
X# ATAPI devices on wdc?
Xdevice wcd0 #IDE CD-ROM
X#device wfd0 #IDE Floppy (e.g. LS-120)
X#device wst0 #IDE Tape (e.g. Travan)
X
X# The 'ATA' driver supports all ATA and ATAPI devices.
X# It can reuse the majors of wd.c for booting purposes.
X# You only need one "controller ata0" for it to find all
X# PCI ATA/ATAPI devices on modern machines.
Xcontroller ata0
X#device atadisk0 # ATA disk drives
X#device atapicd0 # ATAPI CDROM drives
X#device atapifd0 # ATAPI floppy drives
X#device atapist0 # ATAPI tape drives
X#options ATA_STATIC_ID #Static dev number like old `wd' driver
X#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
X
X# SCSI Controllers
X# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is
X# sufficient for any number of installed devices.
X#controller ahb0 # EISA AHA1742 family
Xcontroller ahc0 # AHA2940 and onboard AIC7xxx devices
X#controller amd0 # AMD 53C974 (Teckram DC-390(T))
X#controller dpt0 # DPT Smartcache - See LINT for options!
X#controller isp0 # Qlogic family
X#controller ncr0 # NCR/Symbios Logic
X#controller sym0 # NCR/Symbios Logic (do not mix with ncr, it conflicts)
X
X#controller adv0 at isa? port ? irq ?
X#controller adw0
X#controller bt0 at isa? port ? irq ?
X#controller aha0 at isa? port ? irq ?
X
X# SCSI peripherals
X# Only one of each of these is needed, they are dynamically allocated.
X#controller scbus0 # SCSI bus (required)
X#device da0 # Direct Access (disks)
Xdevice sa0 # Sequential Access (tape etc)
Xdevice cd0 # CD
Xdevice pass0 # Passthrough device (direct SCSI access)
X
Xcontroller scbus0 at ahc0 bus 0
Xdevice da0 at scbus0 target 0
Xdevice da1 at scbus0 target 1
Xdevice da2 at scbus0 target 2
Xdevice da3 at scbus0 target 3
X
X#options CAM_MAX_HIGHPOWER=5
X
X# RAID controllers
X#device amr0 # AMI MegaRAID
Xdevice mlx0 # Mylex DAC960 family
X
X# Proprietary or custom CD-ROM Interfaces
X#device wt0 at isa? port 0x300 irq 5 drq 1
X#device mcd0 at isa? port 0x300 irq 10
X#device matcd0 at isa? port 0x230
X#device scd0 at isa? port 0x230
X
X# atkbdc0 controls both the keyboard and the PS/2 mouse
Xcontroller atkbdc0 at isa? port IO_KBD
Xdevice atkbd0 at atkbdc? irq 1
Xdevice psm0 at atkbdc? irq 12
X
Xdevice vga0 at isa? port ? conflicts
X
X# splash screen/screen saver
Xpseudo-device splash
X
X# syscons is the default console driver, resembling an SCO console
Xdevice sc0 at isa?
X
X# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
X#device vt0 at isa?
X#options XSERVER # support for X server
X#options FAT_CURSOR # start with block cursor
X# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
X#options PCVT_SCANSET=2 # IBM keyboards are non-std
X
X# Floating point support - do not disable.
Xdevice npx0 at nexus? port IO_NPX irq 13
X
X# Power management support (see LINT for more options)
Xdevice apm0 at nexus? flags 0x20 # Advanced Power Management
X
X# PCCARD (PCMCIA) support
X#controller card0
X#device pcic0 at isa?
X#device pcic1 at isa?
X
X# Serial (COM) ports
Xdevice sio0 at isa? port IO_COM1 flags 0x10 irq 4
Xoptions CONSPEED=9600
Xdevice sio1 at isa? port IO_COM2 irq 3
Xdevice sio2 at isa? disable port IO_COM3 irq 5
Xdevice sio3 at isa? disable port IO_COM4 irq 9
X
X# Parallel port
Xdevice ppc0 at isa? port? flags 0x40 irq 7
Xcontroller ppbus0 # Parallel port bus (required)
Xdevice lpt0 # Printer
Xdevice plip0 # TCP/IP over parallel
Xdevice ppi0 # Parallel port interface device
X#controller vpo0 # Requires scbus and da0
X
X
X# PCI Ethernet NICs.
X#device ax0 # ASIX AX88140A
X#device de0 # DEC/Intel DC21x4x (``Tulip'')
Xdevice fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
X#device pn0 # Lite-On 82c168/82c169 (``PNIC'')
X#device tx0 # SMC 9432TX (83c170 ``EPIC'')
X#device vx0 # 3Com 3c590, 3c595 (``Vortex'')
X
X# PCI Ethernet NICs that use the common MII bus controller code.
Xcontroller miibus0 # MII bus support
X#device al0 # ADMtek AL981/AN985 (``Comet''/``Centaur'')
X#device dm0 # Davicom DM9100/DM9102
X#device mx0 # Macronix 98713/98715/98725 (``PMAC'')
Xdevice rl0 # RealTek 8129/8139
Xdevice sf0 # Adaptec AIC-6915 (``Starfire'')
Xdevice sis0 # Silicon Integrated Systems SiS 900/SiS 7016
Xdevice ste0 # Sundance ST201 (D-Link DFE-550TX)
Xdevice tl0 # Texas Instruments ThunderLAN
Xdevice vr0 # VIA Rhine, Rhine II
Xdevice wb0 # Winbond W89C840F
Xdevice xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')
X
X# ISA Ethernet NICs.
X#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
X#device ex0 at isa? port? irq?
X#device ep0
X# The probe order of these is presently determined by i386/isa/isa_compat.c.
X#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
X#device fe0 at isa? port 0x300 irq ?
X#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
X#device lnc0 at isa? port 0x280 irq 10 drq 0
X#device cs0 at isa? port 0x300 irq ?
X# requires PCCARD (PCMCIA) support to be activated
X#device xe0 at isa? port? irq ?
X
X# PCCARD NIC drivers.
X# ze and zp take over the pcic and cannot coexist with generic pccard
X# support, nor the ed and ep drivers they replace.
X#device ze0 at isa? port 0x300 irq 10 iomem 0xd8000
X#device zp0 at isa? port 0x300 irq 10 iomem 0xd8000
X
X# Pseudo devices - the number indicates how many units to allocated.
Xpseudo-device loop # Network loopback
Xpseudo-device ether # Ethernet support
Xpseudo-device sl 1 # Kernel SLIP
Xpseudo-device ppp 1 # Kernel PPP
Xpseudo-device tun # Packet tunnel.
Xpseudo-device pty # Pseudo-ttys (telnet etc)
Xpseudo-device md # Memory "disks"
X
X# The `bpf' pseudo-device enables the Berkeley Packet Filter.
X# Be aware of the administrative consequences of enabling this!
Xpseudo-device bpf #Berkeley packet filter
X
X# USB support
Xcontroller uhci0 # UHCI PCI->USB interface
Xcontroller ohci0 # OHCI PCI->USB interface
Xcontroller usb0 # USB Bus (required)
Xdevice ugen0 # Generic
Xdevice uhid0 # "Human Interface Devices"
Xdevice ukbd0 # Keyboard
Xdevice ulpt0 # Printer
Xcontroller umass0 # Disks/Mass storage - Requires scbus and da0
Xdevice ums0 # Mouse
END-of-ahc_debug/Barbera
echo x - ahc_debug/boot-v
sed 's/^X//' >ahc_debug/boot-v << 'END-of-ahc_debug/boot-v'
X\|/-\|/-\|/-\|/-\|/-\|Console: serial port
XBIOS drive A: is disk0
XBIOS drive C: is disk1
XBIOS drive D: is disk2
XBIOS drive E: is disk3
XBIOS drive F: is disk4
X
XFreeBSD/i386 bootstrap loader, Revision 0.7 638/15360kB
X(toor@barbera.system.pl, Sat Dec 4 00:57:45 CET 1999)
X|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Loading /boot/defaults/loader.conf
X\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//kernel text=0x190ceb -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x238e4+0x1 b894 \|/-\|/-\|/-\|/-\|/syms=[0x4+0x27e40-\|/-\|/-\|/-\|/-\|/+0x4+0x29c3d-\|/-\|/-\|/-\|/-\|/-]
X
XHit [Enter] to boot immediately, or any other key for command prompt.
XBooting [kernel] in 9 seconds...
X
XType '?' for a list of commands, 'help' for more detailed help.
Xok boot -g hv
X\|/-\|/SMAP type=01 base=00000000 00000000 len=00000000 0009f800
XSMAP type=02 base=00000000 0009f800 len=00000000 00000800
XSMAP type=02 base=00000000 000e8000 len=00000000 00018000
XSMAP type=01 base=00000000 00100000 len=00000000 07ef0000
XSMAP type=03 base=00000000 07ff0000 len=00000000 0000f000
XSMAP type=04 base=00000000 07fff000 len=00000000 00001000
XSMAP type=02 base=00000000 fec00000 len=00000000 00010000
XSMAP type=02 base=00000000 fee00000 len=00000000 00001000
XSMAP type=02 base=00000000 fff80000 len=00000000 00080000
XCopyright (c) 1992-1999 The FreeBSD Project.
XCopyright (c) 1982, 1986, 1989, 1991, 1993
X The Regents of the University of California. All rights reserved.
XFreeBSD 4.0-CURRENT #7: Wed Dec 8 20:05:23 CET 1999
X toor@barbera.system.pl:/usr/src/sys/compile/Barbera
XCalibrating clock(s) ... TSC clock: 497426822 Hz, i8254 clock: 1193166 Hz
XCLK_USE_I8254_CALIBRATION not specified - using default frequency
XTimecounter "i8254" frequency 1193182 Hz
XCLK_USE_TSC_CALIBRATION not specified - using old calibration method
XCPU: Pentium III/Xeon (497.44-MHz 686-class CPU)
X Origin = "GenuineIntel" Id = 0x673 Stepping = 3
X Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
Xreal memory = 134152192 (131008K bytes)
XPhysical memory chunk(s):
X0x00001000 - 0x0009efff, 647168 bytes (158 pages)
X0x0033d000 - 0x07fedfff, 130748416 bytes (31921 pages)
Xavail memory = 126730240 (123760K bytes)
Xbios32: Found BIOS32 Service Directory header at 0xc00f6cc0
Xbios32: Entry = 0xfd7e3 (c00fd7e3) Rev = 0 Len = 1
Xpcibios: PCI BIOS entry at 0x430
Xpnpbios: Found PnP BIOS data at 0xc00f6cf0
Xpnpbios: Entry = f0000:a86d Rev = 1.0
XOther BIOS signatures found:
XACPI: 000f6b50
XPreloaded elf kernel "kernel" at 0xc0324000.
XPentium Pro MTRR support enabled
Xmd0: Malloc disk
XCreating DISK md0
XMath emulator present
Xpci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
Xpci_open(1a): mode1res=0x80000000 (0x80000000)
Xpci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
Xdevclass_alloc_unit: pcib0 already exists, using next available unit number
Xnpx0: <math processor> on motherboard
Xnpx0: INT 16 interface
Xpci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
Xpci_open(1a): mode1res=0x80000000 (0x80000000)
Xpci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
Xpcib0: <Intel 82443GX host to PCI bridge> on motherboard
Xfound-> vendor=0x8086, dev=0x71a0, revid=0x00
X class=06-00-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X map[10]: type 1, range 32, base f8000000, size 26
Xfound-> vendor=0x8086, dev=0x71a1, revid=0x00
X class=06-04-00, hdrtype=0x01, mfdev=0
X subordinatebus=3 secondarybus=1
Xfound-> vendor=0x9005, dev=0x005f, revid=0x00
X class=01-00-00, hdrtype=0x00, mfdev=1
X subordinatebus=0 secondarybus=0
X intpin=a, irq=11
X map[10]: type 1, range 32, base 00001400, size 8
X map[14]: type 1, range 64, base f4100000, size 12
Xfound-> vendor=0x9005, dev=0x005f, revid=0x00
X class=01-00-00, hdrtype=0x00, mfdev=1
X subordinatebus=0 secondarybus=0
X intpin=a, irq=11
X map[10]: type 1, range 32, base 00001800, size 8
X map[14]: type 1, range 64, base f4101000, size 12
Xfound-> vendor=0x8086, dev=0x1229, revid=0x08
X class=02-00-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X intpin=a, irq=10
X map[10]: type 1, range 32, base f4102000, size 12
X map[14]: type 1, range 32, base 00001080, size 6
X map[18]: type 1, range 32, base f4000000, size 20
Xfound-> vendor=0x8086, dev=0x7110, revid=0x02
X class=06-01-00, hdrtype=0x00, mfdev=1
X subordinatebus=0 secondarybus=0
Xfound-> vendor=0x8086, dev=0x7111, revid=0x01
X class=01-01-80, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X map[20]: type 1, range 32, base 00001050, size 4
Xfound-> vendor=0x8086, dev=0x7112, revid=0x01
X class=0c-03-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X intpin=d, irq=10
X map[20]: type 1, range 32, base 00001060, size 5
Xfound-> vendor=0x8086, dev=0x7113, revid=0x02
X class=06-80-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X map[90]: type 1, range 32, base 00001040, size 4
Xfound-> vendor=0x1013, dev=0x00bc, revid=0x23
X class=03-00-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X map[10]: type 1, range 32, base f6000000, size 25
X map[14]: type 1, range 32, base f4103000, size 12
Xpci0: <PCI bus> on pcib0
Xpcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
Xfound-> vendor=0x1011, dev=0x0023, revid=0x06
X class=06-04-00, hdrtype=0x01, mfdev=0
X subordinatebus=3 secondarybus=2
Xpci1: <PCI bus> on pcib2
Xpcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1
Xfound-> vendor=0x104c, dev=0xac21, revid=0x01
X class=06-04-00, hdrtype=0x01, mfdev=0
X subordinatebus=3 secondarybus=3
Xpci2: <PCI bus> on pcib3
Xpcib4: <PCI to PCI bridge (vendor=104c device=ac21)> at device 4.0 on pci2
Xpci3: <PCI bus> on pcib4
Xahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> irq 11 at device 12.0 on pci0
Xahc0: Reading SEEPROM...done.
Xahc0: BIOS eeprom not present
Xahc0: Primary Low Byte termination Enabled
Xahc0: Primary High Byte termination Enabled
Xahc0: aic7896/97 Wide Channel A, SCSI Id=7, 16/255 SCBs
Xahc0: Downloading Sequencer Program... 399 instructions downloaded
Xahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> irq 11 at device 12.1 on pci0
Xahc1: Reading SEEPROM...done.
Xahc1: BIOS eeprom not present
Xahc1: Primary Low Byte termination Enabled
Xahc1: Primary High Byte termination Enabled
Xahc1: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs
Xahc1: Downloading Sequencer Program... 399 instructions downloaded
X using shared irq11.
Xfxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 10 at device 14.0 on pci0
Xfxp0: Ethernet address 00:90:27:8d:4c:79
Xbpf: fxp0 attached
Xisab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
Xisa0: <ISA bus> on isab0
Xata-pci0: <Intel PIIX4 ATA controller> at device 18.1 on pci0
Xata-pci0: Busmastering DMA supported
Xata0: iobase=0x01f0 altiobase=0x03f6
Xata0: mask=03 status0=50 status1=00
Xata0: mask=03 status0=10 status1=00
Xata0: devices = 0x4
Xata0 at 0x01f0 irq 14 on ata-pci0
Xata1: iobase=0x0170 altiobase=0x0376
Xata1: mask=03 status0=3f status1=3f
Xata1: mask=03 status0=3f status1=3f
Xata1: devices = 0x0
Xuhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 10 at device 18.2 on pci0
X using shared irq10.
Xusb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
Xusb0: USB revision 1.0
Xuhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Xuhub0: 2 ports with 2 removable, self powered
Xchip1: <Intel 82371AB Power management controller> at device 18.3 on pci0
Xvga-pci0: <Cirrus Logic model 00bc VGA-compatible display device> at device 20.0 on pci0
Xpci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
Xpci_open(1a): mode1res=0x80000000 (0x80000000)
Xpci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
Xdevclass_alloc_unit: pci1 already exists, using next available unit number
Xpcib1: <Intel 82443GX host to AGP bridge> on motherboard
Xpci4: <PCI bus> on pcib1
XTrying Read_Port at 203
XTrying Read_Port at 243
XTrying Read_Port at 283
XTrying Read_Port at 2c3
XTrying Read_Port at 303
XTrying Read_Port at 343
XTrying Read_Port at 383
XTrying Read_Port at 3c3
Xisa_probe_children: disabling PnP devices
Xisa_probe_children: probing non-PnP devices
Xfdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
Xfdc0: FIFO enabled, 8 bytes threshold
Xfd0: <1440-KB 3.5" drive> on fdc0 drive 0
Xwdc0: not probed (disabled)
Xwdc1: not probed (disabled)
Xatkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
Xatkbd0: <AT Keyboard> irq 1 on atkbdc0
Xatkbd: the current kbd controller command byte 0047
Xatkbd: keyboard ID 0x41ab (2)
Xkbdc: RESET_KBD return code:00fa
Xkbdc: RESET_KBD status:00aa
Xkbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
Xpsm0: current command byte:0047
Xkbdc: TEST_AUX_PORT status:0000
Xkbdc: RESET_AUX return code:00fe
Xkbdc: RESET_AUX return code:00fe
Xkbdc: RESET_AUX return code:00fe
Xkbdc: DIAGNOSE status:0055
Xkbdc: TEST_KBD_PORT status:0000
Xpsm0: failed to reset the aux device.
Xvga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
Xfb0: vga0, vga, type:VGA (5), flags:0x7007f
Xfb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
Xfb0: init mode:24, bios mode:3, current mode:24
Xfb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
XVGA parameters upon power-up
X50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
Xbf 1f 00 4f 0d 0e 00 00 01 40 9c 8e 8f 28 1f 96
Xb9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
X3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
XVGA parameters in BIOS for mode 24
X50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
Xbf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
Xb9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
X3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
XEGA/VGA parameters to be used for mode 24
X50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
Xbf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
Xb9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
X3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
Xsc0: <System console> on isa0
Xsc0: VGA <16 virtual consoles, flags=0x0>
Xsc0: fb0 kbd0
Xsio0: irq maps: 0x841 0x851 0x841 0x841
Xsio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Xsio0: type 16550A, console
Xsio1: configured irq 3 not in bitmap of probed irqs 0
Xsio1: irq maps: 0x841 0x841 0x841 0x841
Xsio1: probe failed test(s): 0 1 2 4 6 7 9
Xsio2: not probed (disabled)
Xsio3: not probed (disabled)
Xppc: parallel port found at 0x378
Xppc: chipset forced to generic
Xppc0: ECP SPP SPP
Xppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
Xppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
Xppc0: FIFO with 16/16/8 bytes threshold
Xplip: irq 7
Xplip0: <PLIP network interface> on ppbus 0
Xbpf: lp0 attached
Xlpt0: <generic printer> on ppbus 0
Xlpt0: Interrupt-driven port
Xppi0: <generic parallel i/o> on ppbus 0
Xisa_probe_children: probing PnP devices
Xahc0: Someone reset channel A
XBIOS Geometries:
X 0:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
X 1:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
X 2:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
X 3:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
X 0 accounted for
XDevice configuration finished.
Xbpf: sl0 attached
Xbpf: ppp0 attached
Xnew masks: bio 40084440, tty 40030092, net 40070492
Xbpf: lo0 attached
XWaiting 30 seconds for SCSI devices to settle
X(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
X(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
Xno devsw (majdev=4 bootdev=0xa02000004)
XMounting root from ufs:/dev/da0s1a
Xno such device 'da'
Xsetrootbyname failed
Xffs_mountroot: can't find rootvp
XRoot mount failed: 6
X
XManual root filesystem specification:
X(etc.)
END-of-ahc_debug/boot-v
echo x - ahc_debug/boot-hv
sed 's/^X//' >ahc_debug/boot-hv << 'END-of-ahc_debug/boot-hv'
X\|/-\|/-\|/-\|/-\|/-\|Console: serial port
XBIOS drive A: is disk0
XBIOS drive C: is disk1
XBIOS drive D: is disk2
XBIOS drive E: is disk3
XBIOS drive F: is disk4
X
XFreeBSD/i386 bootstrap loader, Revision 0.7 638/15360kB
X(toor@barbera.system.pl, Sat Dec 4 00:57:45 CET 1999)
X|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Loading /boot/defaults/loader.conf
X\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//kernel text=0x190ceb -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x238e4+0x1 b894 \|/-\|/-\|/-\|/-\|/syms=[0x4+0x27e40-\|/-\|/-\|/-\|/-\|/+0x4+0x29c3d-\|/-\|/-\|/-\|/-\|/-]
X
XHit [Enter] to boot immediately, or any other key for command prompt.
XBooting [kernel] in 9 seconds...
X
XType '?' for a list of commands, 'help' for more detailed help.
Xok boot -g hv
X\|/-\|/SMAP type=01 base=00000000 00000000 len=00000000 0009f800
XSMAP type=02 base=00000000 0009f800 len=00000000 00000800
XSMAP type=02 base=00000000 000e8000 len=00000000 00018000
XSMAP type=01 base=00000000 00100000 len=00000000 07ef0000
XSMAP type=03 base=00000000 07ff0000 len=00000000 0000f000
XSMAP type=04 base=00000000 07fff000 len=00000000 00001000
XSMAP type=02 base=00000000 fec00000 len=00000000 00010000
XSMAP type=02 base=00000000 fee00000 len=00000000 00001000
XSMAP type=02 base=00000000 fff80000 len=00000000 00080000
XCopyright (c) 1992-1999 The FreeBSD Project.
XCopyright (c) 1982, 1986, 1989, 1991, 1993
X The Regents of the University of California. All rights reserved.
XFreeBSD 4.0-CURRENT #7: Wed Dec 8 20:05:23 CET 1999
X toor@barbera.system.pl:/usr/src/sys/compile/Barbera
XCalibrating clock(s) ... TSC clock: 497426822 Hz, i8254 clock: 1193166 Hz
XCLK_USE_I8254_CALIBRATION not specified - using default frequency
XTimecounter "i8254" frequency 1193182 Hz
XCLK_USE_TSC_CALIBRATION not specified - using old calibration method
XCPU: Pentium III/Xeon (497.44-MHz 686-class CPU)
X Origin = "GenuineIntel" Id = 0x673 Stepping = 3
X Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
Xreal memory = 134152192 (131008K bytes)
XPhysical memory chunk(s):
X0x00001000 - 0x0009efff, 647168 bytes (158 pages)
X0x0033d000 - 0x07fedfff, 130748416 bytes (31921 pages)
Xavail memory = 126730240 (123760K bytes)
Xbios32: Found BIOS32 Service Directory header at 0xc00f6cc0
Xbios32: Entry = 0xfd7e3 (c00fd7e3) Rev = 0 Len = 1
Xpcibios: PCI BIOS entry at 0x430
Xpnpbios: Found PnP BIOS data at 0xc00f6cf0
Xpnpbios: Entry = f0000:a86d Rev = 1.0
XOther BIOS signatures found:
XACPI: 000f6b50
XPreloaded elf kernel "kernel" at 0xc0324000.
XPentium Pro MTRR support enabled
Xmd0: Malloc disk
XCreating DISK md0
XMath emulator present
Xpci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
Xpci_open(1a): mode1res=0x80000000 (0x80000000)
Xpci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
Xdevclass_alloc_unit: pcib0 already exists, using next available unit number
Xnpx0: <math processor> on motherboard
Xnpx0: INT 16 interface
Xpci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
Xpci_open(1a): mode1res=0x80000000 (0x80000000)
Xpci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
Xpcib0: <Intel 82443GX host to PCI bridge> on motherboard
Xfound-> vendor=0x8086, dev=0x71a0, revid=0x00
X class=06-00-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X map[10]: type 1, range 32, base f8000000, size 26
Xfound-> vendor=0x8086, dev=0x71a1, revid=0x00
X class=06-04-00, hdrtype=0x01, mfdev=0
X subordinatebus=3 secondarybus=1
Xfound-> vendor=0x9005, dev=0x005f, revid=0x00
X class=01-00-00, hdrtype=0x00, mfdev=1
X subordinatebus=0 secondarybus=0
X intpin=a, irq=11
X map[10]: type 1, range 32, base 00001400, size 8
X map[14]: type 1, range 64, base f4100000, size 12
Xfound-> vendor=0x9005, dev=0x005f, revid=0x00
X class=01-00-00, hdrtype=0x00, mfdev=1
X subordinatebus=0 secondarybus=0
X intpin=a, irq=11
X map[10]: type 1, range 32, base 00001800, size 8
X map[14]: type 1, range 64, base f4101000, size 12
Xfound-> vendor=0x8086, dev=0x1229, revid=0x08
X class=02-00-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X intpin=a, irq=10
X map[10]: type 1, range 32, base f4102000, size 12
X map[14]: type 1, range 32, base 00001080, size 6
X map[18]: type 1, range 32, base f4000000, size 20
Xfound-> vendor=0x8086, dev=0x7110, revid=0x02
X class=06-01-00, hdrtype=0x00, mfdev=1
X subordinatebus=0 secondarybus=0
Xfound-> vendor=0x8086, dev=0x7111, revid=0x01
X class=01-01-80, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X map[20]: type 1, range 32, base 00001050, size 4
Xfound-> vendor=0x8086, dev=0x7112, revid=0x01
X class=0c-03-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X intpin=d, irq=10
X map[20]: type 1, range 32, base 00001060, size 5
Xfound-> vendor=0x8086, dev=0x7113, revid=0x02
X class=06-80-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X map[90]: type 1, range 32, base 00001040, size 4
Xfound-> vendor=0x1013, dev=0x00bc, revid=0x23
X class=03-00-00, hdrtype=0x00, mfdev=0
X subordinatebus=0 secondarybus=0
X map[10]: type 1, range 32, base f6000000, size 25
X map[14]: type 1, range 32, base f4103000, size 12
Xpci0: <PCI bus> on pcib0
Xpcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
Xfound-> vendor=0x1011, dev=0x0023, revid=0x06
X class=06-04-00, hdrtype=0x01, mfdev=0
X subordinatebus=3 secondarybus=2
Xpci1: <PCI bus> on pcib2
Xpcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1
Xfound-> vendor=0x104c, dev=0xac21, revid=0x01
X class=06-04-00, hdrtype=0x01, mfdev=0
X subordinatebus=3 secondarybus=3
Xpci2: <PCI bus> on pcib3
Xpcib4: <PCI to PCI bridge (vendor=104c device=ac21)> at device 4.0 on pci2
Xpci3: <PCI bus> on pcib4
Xahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> irq 11 at device 12.0 on pci0
Xahc0: Reading SEEPROM...done.
Xahc0: BIOS eeprom not present
Xahc0: Primary Low Byte termination Enabled
Xahc0: Primary High Byte termination Enabled
Xahc0: aic7896/97 Wide Channel A, SCSI Id=7, 16/255 SCBs
Xahc0: Downloading Sequencer Program... 399 instructions downloaded
Xahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> irq 11 at device 12.1 on pci0
Xahc1: Reading SEEPROM...done.
Xahc1: BIOS eeprom not present
Xahc1: Secondary High byte termination Enabled
Xahc1: Primary Low Byte termination Enabled
Xahc1: Primary High Byte termination Enabled
Xahc1: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs
Xahc1: Downloading Sequencer Program... 399 instructions downloaded
X using shared irq11.
Xfxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 10 at device 14.0 on pci0
Xfxp0: Ethernet address 00:90:27:8d:4c:79
Xbpf: fxp0 attached
Xisab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
Xisa0: <ISA bus> on isab0
Xata-pci0: <Intel PIIX4 ATA controller> at device 18.1 on pci0
Xata-pci0: Busmastering DMA supported
Xata0: iobase=0x01f0 altiobase=0x03f6
Xata0: mask=03 status0=50 status1=00
Xata0: mask=03 status0=10 status1=00
Xata0: devices = 0x4
Xata0 at 0x01f0 irq 14 on ata-pci0
Xata1: iobase=0x0170 altiobase=0x0376
Xata1: mask=03 status0=3f status1=3f
Xata1: mask=03 status0=3f status1=3f
Xata1: devices = 0x0
Xuhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 10 at device 18.2 on pci0
X using shared irq10.
Xusb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
Xusb0: USB revision 1.0
Xuhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Xuhub0: 2 ports with 2 removable, self powered
Xchip1: <Intel 82371AB Power management controller> at device 18.3 on pci0
Xvga-pci0: <Cirrus Logic model 00bc VGA-compatible display device> at device 20.0 on pci0
Xpci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
Xpci_open(1a): mode1res=0x80000000 (0x80000000)
Xpci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
Xdevclass_alloc_unit: pci1 already exists, using next available unit number
Xpcib1: <Intel 82443GX host to AGP bridge> on motherboard
Xpci4: <PCI bus> on pcib1
XTrying Read_Port at 203
XTrying Read_Port at 243
XTrying Read_Port at 283
XTrying Read_Port at 2c3
XTrying Read_Port at 303
XTrying Read_Port at 343
XTrying Read_Port at 383
XTrying Read_Port at 3c3
Xisa_probe_children: disabling PnP devices
Xisa_probe_children: probing non-PnP devices
Xfdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
Xfdc0: FIFO enabled, 8 bytes threshold
Xfd0: <1440-KB 3.5" drive> on fdc0 drive 0
Xwdc0: not probed (disabled)
Xwdc1: not probed (disabled)
Xatkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
Xatkbd0: <AT Keyboard> irq 1 on atkbdc0
Xatkbd: the current kbd controller command byte 0047
Xatkbd: keyboard ID 0x41ab (2)
Xkbdc: RESET_KBD return code:00fa
Xkbdc: RESET_KBD status:00aa
Xkbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
Xpsm0: current command byte:0047
Xkbdc: TEST_AUX_PORT status:0000
Xkbdc: RESET_AUX return code:00fe
Xkbdc: RESET_AUX return code:00fe
Xkbdc: RESET_AUX return code:00fe
Xkbdc: DIAGNOSE status:0055
Xkbdc: TEST_KBD_PORT status:0000
Xpsm0: failed to reset the aux device.
Xvga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
Xfb0: vga0, vga, type:VGA (5), flags:0x7007f
Xfb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
Xfb0: init mode:24, bios mode:3, current mode:24
Xfb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
XVGA parameters upon power-up
X50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
Xbf 1f 00 4f 0d 0e 00 00 01 40 9c 8e 8f 28 1f 96
Xb9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
X3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
XVGA parameters in BIOS for mode 24
X50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
Xbf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
Xb9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
X3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
XEGA/VGA parameters to be used for mode 24
X50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
Xbf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
Xb9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
X3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
Xsc0: <System console> on isa0
Xsc0: VGA <16 virtual consoles, flags=0x0>
Xsc0: fb0 kbd0
Xsio0: irq maps: 0x841 0x851 0x841 0x841
Xsio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Xsio0: type 16550A, console
Xsio1: configured irq 3 not in bitmap of probed irqs 0
Xsio1: irq maps: 0x841 0x841 0x841 0x841
Xsio1: probe failed test(s): 0 1 2 4 6 7 9
Xsio2: not probed (disabled)
Xsio3: not probed (disabled)
Xppc: parallel port found at 0x378
Xppc: chipset forced to generic
Xppc0: ECP SPP SPP
Xppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
Xppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
Xppc0: FIFO with 16/16/8 bytes threshold
Xplip: irq 7
Xplip0: <PLIP network interface> on ppbus 0
Xbpf: lp0 attached
Xlpt0: <generic printer> on ppbus 0
Xlpt0: Interrupt-driven port
Xppi0: <generic parallel i/o> on ppbus 0
Xisa_probe_children: probing PnP devices
Xahc0: Someone reset channel A
XBIOS Geometries:
X 0:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
X 1:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
X 2:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
X 3:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
X 0 accounted for
XDevice configuration finished.
Xbpf: sl0 attached
Xbpf: ppp0 attached
Xnew masks: bio 40084440, tty 40030092, net 40070492
Xbpf: lo0 attached
XWaiting 30 seconds for SCSI devices to settle
X(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
X(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
Xahc0: target 0 using 16bit transfers
Xahc0: target 0 synchronous at 40.0MHz, offset = 0x1f
Xahc0: target 3 using 16bit transfers
Xahc0: target 3 synchronous at 40.0MHz, offset = 0x1f
Xahc0: target 2 using 16bit transfers
Xahc0: target 2 synchronous at 40.0MHz, offset = 0x1f
Xahc0: target 1 using 16bit transfers
Xahc0: target 1 synchronous at 40.0MHz, offset = 0x1f
XCreating DISK da0
XCreating DISK da1
XCreating DISK da2
XCreating DISK da3
Xpass0 at ahc0 bus 0 target 0 lun 0
Xpass0: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
Xpass0: Serial Number AKLNF626
Xpass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
Xpass1 at ahc0 bus 0 target 1 lun 0
Xpass1: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
Xpass1: Serial Number AK0K3819
Xpass1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
Xpass2 at ahc0 bus 0 target 2 lun 0
Xpass2: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
Xpass2: Serial Number AKLP3554
Xpass2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
Xpass3 at ahc0 bus 0 target 3 lun 0
Xpass3: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
Xpass3: Serial Number AKLNX856
Xpass3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
Xda0 at ahc0 bus 0 target 0 lun 0
Xda0: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
Xda0: Serial Number AKLNF626
Xda0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
Xda0: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
Xda1 at ahc0 bus 0 target 1 lun 0
Xda1: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
Xda1: Serial Number AK0K3819
Xda1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
Xda1: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
Xda2 at ahc0 bus 0 target 2 lun 0
Xda2: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
Xda2: Serial Number AKLP3554
Xda2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
Xda2: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
Xda3 at ahc0 bus 0 target 3 lun 0
Xda3: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
Xda3: Serial Number AKLNX856
Xda3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
Xda3: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
XMounting root from ufs:/dev/da0s1a
Xda0s1: type 0xa5, start 0, end = 35843669, size 35843670 : OK
Xstart_init: trying /sbin/init
Xswapon: adding /dev/da0s1b as swap device
XAutomatic reboot in progress...
X/dev/da0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
X/dev/da0s1a: clean, 45439 free (231 frags, 5651 blocks, 0.3% fragmentation)
X/dev/da0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
X/dev/da0s1f: clean, 15895572 free (26812 frags, 1983595 blocks, 0.2% fragmentation)
X/dev/da0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
X/dev/da0s1e: clean, 59719 free (47 frags, 7459 blocks, 0.1% fragmentation)
XDoing initial network setup: hostname.
Xfxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
X inet 195.205.185.21 netmask 0xffffffc0 broadcast 195.205.185.63
X ether 00:90:27:8d:4c:79
X media: autoselect (100baseTX <full-duplex>) status: active
X supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP
Xlo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
X inet 127.0.0.1 netmask 0xff000000
X
Xadd net default: gateway 195.205.185.1
XAdditional routing options: tcp extensions=NO TCP keepalive=YES.
Xrouting daemons:.
XMounting NFS file systemsnfs: can't access /usr/ports/distfiles: Permission denied
X.
Xadditional daemons: syslogdDec 8 20:38:40 barbera /kernel: kbdc: RESET_KBD return code:00fa
XDec 8 20:38:40 barbera /kernel: kbdc: RESET_KBD status:00aa
XDec 8 20:38:40 barbera /kernel: kbdc: TEST_AUX_PORT status:0000
XDec 8 20:38:40 barbera /kernel: kbdc: RESET_AUX return code:00fe
XDec 8 20:38:40 barbera last message repeated 2 times
XDec 8 20:38:40 barbera /kernel: kbdc: DIAGNOSE status:0055
XDec 8 20:38:40 barbera /kernel: kbdc: TEST_KBD_PORT status:0000
X.
XDoing additional network setup: portmap.
XStarting final network daemons:.
Xsetting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
Xsetting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Xstarting standard daemons: cron.
XInitial rc.i386 initialization:.
Xrc.i386 configuring syscons: blank_time screensaver mousedmoused: unable to open /dev/psm0: Device not configured
X.
XLocal package initialization: sshd.
XAdditional TCP options:.
XWed Dec 8 20:38:44 CET 1999
END-of-ahc_debug/boot-hv
echo x - ahc_debug/diff
sed 's/^X//' >ahc_debug/diff << 'END-of-ahc_debug/diff'
X--- boot-hv Wed Dec 8 19:40:38 1999
X+++ boot-v Wed Dec 8 20:21:01 1999
X@@ -133,7 +133,6 @@
X ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> irq 11 at device 12.1 on pci0
X ahc1: Reading SEEPROM...done.
X ahc1: BIOS eeprom not present
X-ahc1: Secondary High byte termination Enabled
X ahc1: Primary Low Byte termination Enabled
X ahc1: Primary High Byte termination Enabled
X ahc1: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs
X@@ -258,95 +257,12 @@
X Waiting 30 seconds for SCSI devices to settle
X (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
X (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
X-ahc0: target 0 using 16bit transfers
X-ahc0: target 0 synchronous at 40.0MHz, offset = 0x1f
X-ahc0: target 3 using 16bit transfers
X-ahc0: target 3 synchronous at 40.0MHz, offset = 0x1f
X-ahc0: target 2 using 16bit transfers
X-ahc0: target 2 synchronous at 40.0MHz, offset = 0x1f
X-ahc0: target 1 using 16bit transfers
X-ahc0: target 1 synchronous at 40.0MHz, offset = 0x1f
X-Creating DISK da0
X-Creating DISK da1
X-Creating DISK da2
X-Creating DISK da3
X-pass0 at ahc0 bus 0 target 0 lun 0
X-pass0: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
X-pass0: Serial Number AKLNF626
X-pass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
X-pass1 at ahc0 bus 0 target 1 lun 0
X-pass1: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
X-pass1: Serial Number AK0K3819
X-pass1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
X-pass2 at ahc0 bus 0 target 2 lun 0
X-pass2: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
X-pass2: Serial Number AKLP3554
X-pass2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
X-pass3 at ahc0 bus 0 target 3 lun 0
X-pass3: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
X-pass3: Serial Number AKLNX856
X-pass3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
X-da0 at ahc0 bus 0 target 0 lun 0
X-da0: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
X-da0: Serial Number AKLNF626
X-da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
X-da0: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
X-da1 at ahc0 bus 0 target 1 lun 0
X-da1: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
X-da1: Serial Number AK0K3819
X-da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
X-da1: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
X-da2 at ahc0 bus 0 target 2 lun 0
X-da2: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
X-da2: Serial Number AKLP3554
X-da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
X-da2: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
X-da3 at ahc0 bus 0 target 3 lun 0
X-da3: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
X-da3: Serial Number AKLNX856
X-da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
X-da3: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
X+no devsw (majdev=4 bootdev=0xa02000004)
X Mounting root from ufs:/dev/da0s1a
X-da0s1: type 0xa5, start 0, end = 35843669, size 35843670 : OK
X-start_init: trying /sbin/init
X-swapon: adding /dev/da0s1b as swap device
X-Automatic reboot in progress...
X-/dev/da0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
X-/dev/da0s1a: clean, 45439 free (231 frags, 5651 blocks, 0.3% fragmentation)
X-/dev/da0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
X-/dev/da0s1f: clean, 15895572 free (26812 frags, 1983595 blocks, 0.2% fragmentation)
X-/dev/da0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
X-/dev/da0s1e: clean, 59719 free (47 frags, 7459 blocks, 0.1% fragmentation)
X-Doing initial network setup: hostname.
X-fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
X- inet 195.205.185.21 netmask 0xffffffc0 broadcast 195.205.185.63
X- ether 00:90:27:8d:4c:79
X- media: autoselect (100baseTX <full-duplex>) status: active
X- supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP
X-lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
X- inet 127.0.0.1 netmask 0xff000000
X+no such device 'da'
X+setrootbyname failed
X+ffs_mountroot: can't find rootvp
X+Root mount failed: 6
X
X-add net default: gateway 195.205.185.1
X-Additional routing options: tcp extensions=NO TCP keepalive=YES.
X-routing daemons:.
X-Mounting NFS file systemsnfs: can't access /usr/ports/distfiles: Permission denied
X-.
X-additional daemons: syslogdDec 8 20:38:40 barbera /kernel: kbdc: RESET_KBD return code:00fa
X-Dec 8 20:38:40 barbera /kernel: kbdc: RESET_KBD status:00aa
X-Dec 8 20:38:40 barbera /kernel: kbdc: TEST_AUX_PORT status:0000
X-Dec 8 20:38:40 barbera /kernel: kbdc: RESET_AUX return code:00fe
X-Dec 8 20:38:40 barbera last message repeated 2 times
X-Dec 8 20:38:40 barbera /kernel: kbdc: DIAGNOSE status:0055
X-Dec 8 20:38:40 barbera /kernel: kbdc: TEST_KBD_PORT status:0000
X-.
X-Doing additional network setup: portmap.
X-Starting final network daemons:.
X-setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
X-setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
X-starting standard daemons: cron.
X-Initial rc.i386 initialization:.
X-rc.i386 configuring syscons: blank_time screensaver mousedmoused: unable to open /dev/psm0: Device not configured
X-.
X-Local package initialization: sshd.
X-Additional TCP options:.
X-Wed Dec 8 20:38:44 CET 1999
X+Manual root filesystem specification:
X+(etc.)
END-of-ahc_debug/diff
echo x - ahc_debug/README
sed 's/^X//' >ahc_debug/README << 'END-of-ahc_debug/README'
X
X
Xtotal 45
X-rw-r--r-- 1 saper wheel 8717 8 Gru 20:08 Barbera
X
XBarbera --- kernel config file.
X Parameters tweaked: SCSI_DELAY = 30s
X COMSPEED=9600/115200
X SC_HISTORY_SIZE=1000
X
X-rw-r--r-- 1 saper wheel 118 8 Gru 20:27 README
X
XThis file
X
X-rw-r--r-- 1 saper wheel 16471 8 Gru 19:40 boot-hv
X
XSerial (successful!) boot with verbose
X
X-rw-r--r-- 1 saper wheel 12016 8 Gru 20:21 boot-v
X
XVGA console boot (fatal) with verbose -- manually edited
Xto adjust changes taken off the screen
X
X-rw-r--r-- 1 saper wheel 5535 8 Gru 20:23 diff
X
Xdiff -ruN between two....
END-of-ahc_debug/README
exit
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199912082040.MAA73655>