Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 23 Jun 2006 01:32:40 -0300 (ADT)
From:      "Marc G. Fournier" <scrappy@hub.org>
To:        freebsd-stable@freebsd.org
Subject:   FreeBSD 6.x on Dual PIII server only seeing one CPU ...
Message-ID:  <20060623012053.R1114@ganymede.hub.org>

next in thread | raw e-mail | index | archive | help

Are there any known problems with FreeBSD 6.x and Dual PIII motherboards?

My source tree is from May 25th ...

I just noticed something while looking around my server, and there is no 
CPU1 running, only CPU0 ... I definitely have SMP enabled in my kernel:

# strings /boot/kernel/kernel | grep SMP
SMP_prvspace
SMPpt
Correcting Natoma config for SMP
Kernel SMP
SMP has been disabled from the loader
FreeBSD/SMP: Multiprocessor System Detected: %d CPUs
SMP: CPU %d exceeds maximum CPU %d, ignoring
SMP: Added CPU %d (%s)
SMP: cpuid = %d
SMP: actual apic_id = %d
SMP: correct apic_id = %d
SMP: AP CPU #%d Launched!
SMP: tlb shootdown to %d other cpus (only have %d)
Indicates whether the TSC is safe to use in SMP mode
npx0 cannot use IRQ 13 on an SMP system
npx0 cannot be emulated on an SMP system

but, as dmesg shows, no 2nd CPU is even being attempted to start:

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #1: Sun Jun 18 00:01:02 ADT 2006
     root@pluto.hub.org:/usr/obj/usr/src/sys/kernel
acpi_alloc_wakeup_handler: can't alloc wake memory
ACPI APIC Table: <INTEL  SCB20   >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU - S         1266MHz (1263.45-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6b4  Stepping = 4
   Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 4227792896 (4031 MB)
avail memory = 4144308224 (3952 MB)
     ACPI-0698: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [CSB5] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope)
     ACPI-0698: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
lapic3: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL SCB20> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <mass storage, RAID> at device 2.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x1480-0x14bf mem 0xfe790000-0xfe790fff,0xfe760000-0xfe77ffff irq 21 at device 3.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:03:47:bd:67:66
fxp1: <Intel 82550 Pro/100 Ethernet> port 0x14c0-0x14ff mem 0xfeac0000-0xfeac0fff,0xfeaa0000-0xfeabffff irq 20 at device 4.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:03:47:bd:67:67
pci0: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 15.1 (no driver attached)
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
iir0: <Intel Integrated RAID Controller> mem 0xfc8f0000-0xfc8f3fff irq 30 at device 9.0 on pci1
iir0: [GIANT-LOCKED]
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd0fff,0xd1000-0xd27ff,0xd2800-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
Timecounter "TSC" frequency 1263452709 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
ses0 at iir0 bus 1 target 6 lun 0
ses0: <ESG-SHV SCA HSBP M16 0.05> Fixed Processor SCSI-2 device 
ses0: SAF-TE Compliant Device
da0 at iir0 bus 2 target 0 lun 0
da0: <Intel Host Drive   #00 > Fixed Direct Access SCSI-2 device 
da0: Tagged Queueing Enabled
da0: 174848MB (358088850 512 byte sectors: 255H 63S/T 22290C)
Trying to mount root from ufs:/dev/da0s1a

----
Marc G. Fournier           Hub.Org Networking Services (http://www.hub.org)
Email . scrappy@hub.org                              MSN . scrappy@hub.org
Yahoo . yscrappy               Skype: hub.org        ICQ . 7615664



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060623012053.R1114>