From owner-freebsd-mobile Sat Feb 12 11: 2: 2 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freesbee.wheel.dk (freesbee.wheel.dk [193.162.159.97]) by builder.freebsd.org (Postfix) with ESMTP id 982DE3FAB for ; Sat, 12 Feb 2000 11:01:44 -0800 (PST) Received: by freesbee.wheel.dk (Postfix, from userid 1001) id 8FC443E3D; Sat, 12 Feb 2000 20:01:05 +0100 (CET) Date: Sat, 12 Feb 2000 20:01:05 +0100 From: Jesper Skriver To: mobile@FreeBSD.org Subject: Support for Eicon Diva Pro ISDN pccard adapter Message-ID: <20000212200105.A36317@skriver.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, Does anyone have any idea of how to get such a thing to work (in -current) ? I assume it's just a serial port to the system, but the below says Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter I don't know is this means, that it's not a serial port, or ? pccardc dumpcis: Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x15 (Version 1 info), length = 37 000: 01 04 45 69 63 6f 6e 20 44 69 65 68 6c 00 44 69 010: 76 61 20 50 72 6f 00 30 35 2e 30 33 2e 39 36 00 020: 31 2d 31 00 ff Version = 1.4, Manuf = [Eicon Diehl],card vers = [Diva Pro] Addit. info = [05.03.96],[1-1] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 21 01 32 20 PCMCIA ID = 0x121, OEM ID = 0x2032 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x1a (Configuration map), length = 6 000: 01 01 c0 00 01 ff Reg len = 2, config register addr = 0xc0, last config = 0x1 Registers: X------- Tuple #6, code = 0x1b (Configuration entry), length = 12 000: c1 81 19 71 55 7d 7d 7d 44 30 ff ff Config index = 0x1(default) Interface byte = 0x81 (I/O) wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 9 x 10mA Max current average over 10 ms: 9 x 10mA Power down supply current: 9 x 10mA Card decodes 4 address lines, limited 8/16 Bit I/O IRQ modes: Pulse IRQ level = 4 Tuple #7, code = 0x14 (No link), length = 0 Tuple #8, code = 0xff (Terminator), length = 0 /Jesper -- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: Geek @ AS2109 (A much smaller network ;-) One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message