Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 9 Feb 2021 08:26:52 +0100
From:      Jesper Schmitz Mouridsen <jsm@FreeBSD.org>
To:        KIRIYAMA Kazuhiko <kiri@truefc.org>
Cc:        freebsd-arm@freebsd.org
Subject:   Re: Pinebook Pro display.
Message-ID:  <13e0a834-6c93-7d59-120f-59a5112fe365@FreeBSD.org>
In-Reply-To: <202102082257.118MverB010524@kx.truefc.org>
References:  <3161cf79-0ec1-a3bc-801f-084d014ca92d@FreeBSD.org> <202102040606.11466HZB089892@kx.truefc.org> <9dcde0d6-ccd9-af13-dffa-5a80d221cff9@FreeBSD.org> <202102080652.1186qEGm050474@kx.truefc.org> <36699f90-fadd-86db-d6ee-62fadc0caf95@FreeBSD.org> <202102082257.118MverB010524@kx.truefc.org>

next in thread | previous in thread | raw e-mail | index | archive | help

On 08.02.2021 23.57, KIRIYAMA Kazuhiko wrote:
> On Mon, 08 Feb 2021 17:20:38 +0900,
> Jesper Schmitz Mouridsen wrote:
>>
>> On 08.02.2021 07.52, KIRIYAMA Kazuhiko wrote:
>>> On Thu, 04 Feb 2021 22:24:05 +0900,
>>> Jesper Schmitz Mouridsen wrote:
>>>> On 04.02.2021 07.06, KIRIYAMA Kazuhiko wrote:
>>>>> Hi, Jesper
>>>>>
>>>>> On Mon, 01 Feb 2021 00:49:24 +0900,
>>>>> Jesper Schmitz Mouridsen wrote:
>>>>>> Hi
>>>>>>
>>>>>> Just for information, I did some trial and error on u-boot for the=

>>>>>>
>>>>>> Pinebook Pro in order to have display working without hacking
>>>>>>
>>>>>> the kernel. See https://github.com/jsm222/ports and
>>>>> I've modified for u-boot-2020.10 [1] and remade
>>>>> idbloader.img and u-boot.itb then install those and reboot.
>>>>> But could not display console ;-(
>>>> I sent you a PM with a patch.
>>>>
>>>> Also we did some duplicate work, see
>>>>
>>>> https://github.com/jsm222/u-boot-pinebookpro
>>> I've tested above, it display until FreeBSD kernel boot but
>>> blackout after. Namely display console
>>> from `U-Boot 2020.10 (Feb 08 2021 -10:55:28 +0900)'
>>> to `masks          0x0000f800, 0x000007e0, 0x0000001f, 0x00000000'
>>> and blackout after '---<<BOOT>>---' in the below log :
>>>
>>> root@kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0
>>> Connected
>>>
>>> U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28)
>>> Channel 0: LPDDR4, 50MHz
>>> BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D16 =
Size=3D2048MB
>>> Channel 1: LPDDR4, 50MHz
>>> BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D16 =
Size=3D2048MB
>>> 256B stride
>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
>>> Trying to boot from BOOTROM
>>> Returning to boot ROM...
>> Hi, you also need to copy the u-boot dtb files to the efi partition
>>
>> from /usr/ports/sysutils/u-boot-pinebookpro/work/u-boot-2020.10.
>>
>> sudo find . -name "*.dtb" -exec cp -iv {} /mnt/dtb/rockchip/ \;
> I'd copied *.dtb to /mnt/dtb/rockchip as follows :
>
> root@kazu:~ # gpart show mmcsd0
> =3D>       40  244277168  mmcsd0  GPT  (116G)
>           40      32728          - free -  (16M)
>        32768     102400       1  efi  (50M)
>       135168   16777216       2  freebsd-swap  (8.0G)
>     16912384  227364736       3  freebsd-ufs  (108G)
>    244277120         88          - free -  (44K)
>
> root@kazu:~ # mount_msdosfs /dev/mmcsd0p1 /mnt
> root@kazu:~ # ll /mnt/dtb/rockchip/
> total 1624
> -rwxr-xr-x  1 root  wheel  11861 Feb  8 20:02 dt-spl.dtb*
> -rwxr-xr-x  1 root  wheel  67273 Feb  8 20:02 dt.dtb*
> -rwxr-xr-x  1 root  wheel  58854 Feb  8 20:02 rk3399-evb.dtb*
> -rwxr-xr-x  1 root  wheel  62750 Feb  8 20:02 rk3399-ficus.dtb*
> -rwxr-xr-x  1 root  wheel  63968 Feb  8 20:02 rk3399-firefly.dtb*
> -rwxr-xr-x  1 root  wheel  66411 Feb  8 20:02 rk3399-gru-bob.dtb*
> -rwxr-xr-x  1 root  wheel  63354 Feb  8 20:02 rk3399-khadas-edge-captai=
n.dtb*
> -rwxr-xr-x  1 root  wheel  63346 Feb  8 20:02 rk3399-khadas-edge-v.dtb*=

> -rwxr-xr-x  1 root  wheel  63291 Feb  8 20:02 rk3399-khadas-edge.dtb*
> -rwxr-xr-x  1 root  wheel  61094 Feb  8 20:02 rk3399-leez-p710.dtb*
> -rwxr-xr-x  1 root  wheel  63784 Feb  8 20:02 rk3399-nanopc-t4.dtb*
> -rwxr-xr-x  1 root  wheel  62897 Feb  8 20:02 rk3399-nanopi-m4-2gb.dtb*=

> -rwxr-xr-x  1 root  wheel  62897 Feb  8 20:02 rk3399-nanopi-m4.dtb*
> -rwxr-xr-x  1 root  wheel  62753 Feb  8 20:02 rk3399-nanopi-neo4.dtb*
> -rwxr-xr-x  1 root  wheel  64009 Feb  8 20:02 rk3399-orangepi.dtb*
> -rwxr-xr-x  1 root  wheel  67273 Feb  8 20:02 rk3399-pinebook-pro.dtb*
> -rwxr-xr-x  1 root  wheel  56223 Feb  8 20:02 rk3399-puma-haikou.dtb*
> -rwxr-xr-x  1 root  wheel  65035 Feb  8 20:02 rk3399-roc-pc-mezzanine.d=
tb*
> -rwxr-xr-x  1 root  wheel  63850 Feb  8 20:02 rk3399-roc-pc.dtb*
> -rwxr-xr-x  1 root  wheel  55473 Feb  8 20:02 rk3399-rock-pi-4a.dtb*
> -rwxr-xr-x  1 root  wheel  62227 Feb  8 20:02 rk3399-rock-pi-4b.dtb*
> -rwxr-xr-x  1 root  wheel  62227 Feb  8 20:02 rk3399-rock-pi-4c.dtb*
> -rwxr-xr-x  1 root  wheel  62376 Feb  8 20:02 rk3399-rock960.dtb*
> -rwxr-xr-x  1 root  wheel  63651 Feb  8 20:02 rk3399-rockpro64.dtb*
> -rwxr-xr-x  1 root  wheel  59921 Feb  8 20:02 rk3399pro-rock-pi-n10.dtb=
*
> -rwxr-xr-x  1 root  wheel  11861 Feb  8 20:02 u-boot-spl.dtb*
> -rwxr-xr-x  1 root  wheel  11861 Feb  8 20:02 u-boot-tpl.dtb*
> -rwxr-xr-x  1 root  wheel  67273 Feb  8 20:02 u-boot.dtb*
> root@kazu:~ #
>
> But does not display console as well ;-) Boot log is as
> follows :

Hi,

What is your output of

sysctl hw.clock.aclk_vop1

my output is:

hw.clock.aclk_vop1.enable_cnt: 0
hw.clock.aclk_vop1.childrens:
hw.clock.aclk_vop1.parents: aclk_vop1_pre
hw.clock.aclk_vop1.parent: aclk_vop1_pre
hw.clock.aclk_vop1.frequency: 594000000
and sysctl hw.clock.cpll

my output is:

hw.clock.cpll.enable_cnt: 16
hw.clock.cpll.childrens: pclk_ddr_c aclk_vcodec_pre_c aclk_vdu_pre_c=20
aclk_iep_pre_c aclk_rga_pre_c clk_rga_core_c clk_crypto0_c clk_crypto1_c =

clk_i2s0_div_c clk_i2s1_div_c clk_i2s2_div_c clk_spdif_rec_dptx_c=20
clk_spdif_div_c clk_uart_src clk_uart0_src clk_testout2_pll_src=20
clk_testout1_pll_src aclk_hdcp_c aclk_vio_c pclk_edp_c aclk_isp0_c=20
aclk_isp1_c aclk_gic_pre_c clk_cifout_src_c clk_spi5_c clk_test_pre=20
clk_spi0_c clk_spi4_c clk_spi2_c clk_i2c5_c clk_i2c1_c clk_i2c6_c=20
clk_i2c2_c clk_i2c7_c clk_i2c3_c cpll_cs cpll_cci_trace=20
cpll_aclk_cci_src cpll_aclk_perihp_src cpll_aclk_emmc_src=20
cpll_aclk_gmac_src cpll_fclk_cm0s_src cpll_aclk_perilp0_src=20
cpll_hclk_perilp1_src clk_uphy0_tcpdcore_c clk_uphy1_tcpdcore_c clk_sdmmc=
_c
hw.clock.cpll.parents: xin24m xin32k
hw.clock.cpll.parent: xin24m
hw.clock.cpll.frequency: 800000000

/Jesper


> root@kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0
> Connected
>
> U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28)
> Channel 0: LPDDR4, 50MHz
> BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D16 Si=
ze=3D2048MB
> Channel 1: LPDDR4, 50MHz
> BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D16 Si=
ze=3D2048MB
> 256B stride
> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
> Trying to boot from BOOTROM
> Returning to boot ROM...
>
> U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900)
> Trying to boot from MMC2
>
>
> U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900)
> Consoles: EFI console
>      Reading loader env vars from /efi/freebsd/loader.env
> Setting currdev to disk0p1:
> FreeBSD/arm64 EFI loader, Revision 1.1
> (Fri Jan  8 12:04:36 JST 2021 admin@lmainkx)
>
>     Command line arguments: loader.efi
>     Image base: 0xf3df0000
>     EFI version: 2.80
>     EFI Firmware: Das U-Boot (rev 8224.4096)
>     Console: comconsole (0)
>     Load Path: /efi\boot\bootaa64.efi
>     Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/e=
MMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0=
)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
> Setting currdev to disk0p1:
> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD=
(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000)
> Setting currdev to disk0p2:
> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD=
(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80)
> Setting currdev to disk0p3:
> Loading /boot/defaults/loader.conf
> Loading /boot/defaults/loader.conf
> Loading /boot/device.hints
> Loading /boot/loader.conf
> Loading /boot/loader.conf.local
> c[H[J[8;48H  [31m```                        [31;1m`[31m[9;48H s` `.....=
---...[31;1m....--.```   -/[31m[10;48H +o   .--`         [31;1m/y:`      =
+.[31m[11;48H  yo`:.            [31;1m:o      `+-[31m[12;48H   y/        =
       [31;1m-/`   -o/[31m[13;48H  .-                  [31;1m::/sy+:.[31m=
[14;48H  /                     [31;1m`--  /[31m[15;48H `:                =
          [31;1m:`[31m[16;48H `:                          [31;1m:`[31m[17=
;48H  /                          [31;1m/[31m[18;48H  .-                  =
      [31;1m-.[31m[19;48H   --                      [31;1m-.[31m[20;48H  =
  `:`                  [31;1m`:`[21;48H      [31;1m.--             `--.[2=
2;48H         .---.....----.[m[1;2H  ______               ____   _____ __=
___  [2;2H |  ____|             |  _ \ / ____|  __ \ [3;2H | |___ _ __ __=
_  ___ | |_) | (___ | |  | |[4;2H |  ___| '__/ _ \/ _ \|  _ < \___ \| |  =
| |[5;2H | |   | | |  __/  __/| |_) |____) | |__| |[6;2H | |   | | |    |=
    ||     |      |      |[7;2H |_|   |_| !
>    \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H----=
-------------------------------------[22;3H------------------------------=
-----------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[1=
4;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|=
[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;=
5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle use=
r[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1=
mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mk=
ernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 =
seconds, hit [Enter] to boot or any other key to stop
> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key=
 to stop
> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key=
 to stop
> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key=
 to stop
> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key=
 to stop
> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key=
 to stop
> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key=
 to stop
> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key=
 to stop
> [25;0HLoading kernel...
> /boot/kernel/kernel text=3D0x2a8 text=3D0x87de9c text=3D0x1f04bc data=3D=
0x19b3c0 data=3D0x0+0x53ffc6 syms=3D[0x8+0x116910+0x8+0x13b60e]
> Loading configured modules...
> /etc/hostid size=3D0x25
> /boot/entropy size=3D0x1000
> Using DTB provided by EFI at 0x80ec000.
> EFI framebuffer information:
> addr, size     0xf7800000, 0x3f4800
> dimensions     1920 x 1080
> stride         1920
> masks          0x0000f800, 0x000007e0, 0x0000001f, 0x00000000
> ---<<BOOT>>---
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2020 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 199=
4
>          The Regents of the University of California. All rights reserv=
ed.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan  8 20:33:21 JST 2021
>      admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvm=
org-11.0.0-0-g176249bd673)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT(efifb): resolution 1920x1080
> module firmware already present!
> real memory  =3D 4158373888 (3965 MB)
> avail memory =3D 4025094144 (3838 MB)
> Starting CPU 1 (1)
> Starting CPU 2 (2)
> Starting CPU 3 (3)
> Starting CPU 4 (100)
> Starting CPU 5 (101)
> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
> random: unblocking device.
> random: entropy device external interface
> MAP f3f16000 mode 2 pages 4
> MAP f3f1b000 mode 2 pages 4
> MAP f6f40000 mode 2 pages 16
> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD=
 13.0.
> kbd0 at kbdmux0
> WARNING: Device "openfirm" is Giant locked and may be deleted before Fr=
eeBSD 13.0.
> ofwbus0: <Open Firmware Device Tree>
> clk_fixed0: <Fixed clock> on ofwbus0
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on=
 ofwbus0
> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff7500=
00-0xff750fff on ofwbus0
> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff=
760fff on ofwbus0
> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on=
 ofwbus0
> regfix0: <Fixed Regulator> on ofwbus0
> regfix1: <Fixed Regulator> on ofwbus0
> regfix2: <Fixed Regulator> on ofwbus0
> regfix3: <Fixed Regulator> on ofwbus0
> regfix4: <Fixed Regulator> on ofwbus0
> regfix5: <Fixed Regulator> on ofwbus0
> regfix6: <Fixed Regulator> on ofwbus0
> regfix7: <Fixed Regulator> on ofwbus0
> regfix8: <Fixed Regulator> on ofwbus0
> regfix9: <Fixed Regulator> on ofwbus0
> regfix10: <Fixed Regulator> on ofwbus0
> regfix11: <Fixed Regulator> on ofwbus0
> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff3=
10fff on ofwbus0
> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff=
,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff2=
0000-0xfff2ffff irq 18 on ofwbus0
> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff=
 on gic0
> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on =
rk_grf0
> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on=
 rk_grf1
> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71=
 on rk_pinctrl0
> gpiobus0: <OFW GPIO bus> on gpio0
> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72=
 on rk_pinctrl0
> gpiobus1: <OFW GPIO bus> on gpio1
> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73=
 on rk_pinctrl0
> gpiobus2: <OFW GPIO bus> on gpio2
> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74=
 on rk_pinctrl0
> gpiobus3: <OFW GPIO bus> on gpio3
> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75=
 on rk_pinctrl0
> gpiobus4: <OFW GPIO bus> on gpio4
> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
> iicbus0: <OFW I2C bus> on rk_i2c0
> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
> iicbus1: <OFW I2C bus> on rk_i2c1
> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
> iicbus2: <OFW I2C bus> on rk_i2c2
> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
> iicbus3: <OFW I2C bus> on rk_i2c3
> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000=

> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq=
 35 on ofwbus0
> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_=
grf1
> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_=
grf1
> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk=
_grf1
> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on r=
k_grf1
> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on=
 ofwbus0
> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on=
 ofwbus0
> cpulist0: <Open Firmware CPU Group> on ofwbus0
> cpu0: <Open Firmware CPU> on cpulist0
> cpufreq_dt0: <Generic cpufreq driver> on cpu0
> cpu1: <Open Firmware CPU> on cpulist0
> cpufreq_dt1: <Generic cpufreq driver> on cpu1
> cpu2: <Open Firmware CPU> on cpulist0
> cpufreq_dt2: <Generic cpufreq driver> on cpu2
> cpu3: <Open Firmware CPU> on cpulist0
> cpufreq_dt3: <Generic cpufreq driver> on cpu3
> cpu4: <Open Firmware CPU> on cpulist0
> cpufreq_dt4: <Generic cpufreq driver> on cpu4
> cpu5: <Open Firmware CPU> on cpulist0
> cpufreq_dt5: <Generic cpufreq driver> on cpu5
> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-=
0xfdffffff irq 6,7,8 on ofwbus0
> pcib0: Gen1 link training timeouted: 0x00080001.
> pci0: <PCI bus> on pcib0
> pcib1: <PCI-PCI bridge> at device 0.0 on pci0
> pcib0: failed to reserve resource for pcib1
> pcib1: failed to allocate initial memory window: 0-0xfffff
> pci1: <PCI bus> on pcib1
> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (R=
ockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
> rockchip_dwmmc0: Hardware version ID is 270a
> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (R=
ockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
> rockchip_dwmmc1: Hardware version ID is 270a
> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe3=
3ffff irq 12 on ofwbus0
> rk_emmcphy0: got emmcclk clock
> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, set=
ting BROKEN_TIMEOUT quirk.
> sdhci_fdt0: 1 slot(s) allocated
> mmc0: <MMC/SD bus> on sdhci_fdt0
> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on of=
wbus0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on of=
wbus0
> usbus1 on ohci0
> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on of=
wbus0
> usbus2: EHCI version 1.0
> usbus2 on ehci1
> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on of=
wbus0
> usbus3 on ohci1
> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on r=
k_dwc30
> xhci0: 64 bytes context size, 32-bit DMA
> usbus4: trying to attach
> usbus4 on xhci0
> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on r=
k_dwc31
> xhci1: 64 bytes context size, 32-bit DMA
> usbus5: trying to attach
> usbus5 on xhci1
> iicbus0: <unknown card> at addr 0x22
> iic0: <I2C generic I/O> on iicbus0
> iic1: <I2C generic I/O> on iicbus1
> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus=
0
> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus=
0
> uart1: console (1500000,n,8,1)
> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
> spibus0: <OFW SPI bus> on spi0
> spibus0: <unknown card> at cs 0 mode 0
> iicbus2: <unknown card> at addr 0x82
> iic2: <I2C generic I/O> on iicbus2
> iicbus3: <unknown card> at addr 0x44
> iic3: <I2C generic I/O> on iicbus3
> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
> pwmbus0: <OFW PWM bus> on pwm0
> pwmc0: <PWM Control> channel 0 on pwmbus0
> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
> pwmbus1: <OFW PWM bus> on pwm1
> pwmc1: <PWM Control> channel 0 on pwmbus1
> gpioc0: <GPIO controller> on gpio0
> gpioc1: <GPIO controller> on gpio1
> gpioc2: <GPIO controller> on gpio2
> gpioc3: <GPIO controller> on gpio3
> gpioc4: <GPIO controller> on gpio4
> gpioled0: <GPIO LEDs> on ofwbus0
> cryptosoft0: <software crypto>
> Timecounters tick every 1.000 msec
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 480Mbps High Speed USB v2.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 5.0Gbps Super Speed USB v3.0
> usbus5: 5.0Gbps Super Speed USB v3.0
> ugen3.1: <Generic OHCI root HUB> at usbus3
> uhub0 on usbus3
> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usb=
us3
> ugen2.1: <Generic EHCI root HUB> at usbus2
> uhub1 on usbus2
> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usb=
us2
> ugen1.1: <Generic OHCI root HUB> at usbus1
> uhub2 on usbus1
> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usb=
us1
> ugen0.1: <Generic EHCI root HUB> at usbus0
> uhub3 on usbus0
> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usb=
us0
> ugen5.1: <Synopsys XHCI root HUB> at usbus5
> uhub4 on usbus5
> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on us=
bus5
> ugen4.1: <Synopsys XHCI root HUB> at usbus4
> uhub5 on usbus4
> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on us=
bus4
> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> a=
t mmc0 25.0MHz/8bit/65535-block
> mmcsd0boot0: 4MB partition 1 at mmcsd0
> mmcsd0boot1: 4MB partition 2 at mmcsd0
> mmcsd0rpmb: 17MB partition 3 at mmcsd0
> Release APs...done
> CPU  0: ARM Cortex-A53 r0p4 affinity:  0  0
>                     Cache Type =3D <64 byte D-cacheline,64 byte I-cache=
line,VIPT ICache,64 byte ERG,64 byte CWG>
>   Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL>
>   Instruction Set Attributes 1 =3D <>
>           Processor Features 0 =3D <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32=
,EL0 32>
>           Processor Features 1 =3D <>
>        Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit =
ASID,1TB PA>
>        Memory Model Features 1 =3D <8bit VMID>
>        Memory Model Features 2 =3D <32bit CCIDX,48bit VA>
> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]...
>               Debug Features 0 =3D <2 CTX BKPTs,4 Watchpoints,6 Breakpo=
ints,PMUv3,Debugv8>
>               Debug Features 1 =3D <>
>           Auxiliary Features 0 =3D <>
>           Auxiliary Features 1 =3D <>
> CPU  1: ARM Cortex-A53 r0p4 affinity:  0  1
>                     Cache Type =3D <64 byte D-cacheline,64 byte I-cache=
line,VIPT ICache,64 byte ERG,64 byte CWG>
>        Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit =
ASID,1TB PA>
> CPU  2: ARM Cortex-A53 r0p4 affinity:  0  2
>                     Cache Type =3D <64 byte D-cacheline,64 byte I-cache=
line,VIPT ICache,64 byte ERG,64 byte CWG>
>        Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit =
ASID,1TB PA>
> CPU  3: ARM Cortex-A53 r0p4 affinity:  0  3
>                     Cache Type =3D <64 byte D-cacheline,64 byte I-cache=
line,VIPT ICache,64 byte ERG,64 byte CWG>
>        Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit =
ASID,1TB PA>
> CPU  4: ARM Cortex-A72 r0p2 affinity:  1  0
>                     Cache Type =3D <64 byte D-cacheline,64 byte I-cache=
line,PIPT ICache,64 byte ERG,64 byte CWG>
>        Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit =
ASID,16TB PA>
> CPU  5: ARM Cortex-                   Cache Type =3D <64 byte D-cacheli=
ne,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>        Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit =
ASID,16TB PA>
> WARNING: WITNESS option enabled, expect reduced performance.
> Unresolved linked clock found: clkin_gmac
> uhub0: 1 port with 1 removable, self powered
> uhub2: 1 port with 1 removable, self powered
> uhub5: 2 ports with 2 removable, self powered
> Warning: no time-of-day clock registered, uhub4: 2 ports with 2 removab=
le, self powered
> system time will not be set accurately
> uhub1: 1 port with 1 removable, self powered
> uhub3: 1 port with 1 removable, self powered
> Setting hostuuid: 31323634-3737-6236-6162-336630376339.
> Setting hostid: 0x5d4b60f9.
> Starting file system checks:
> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/mmcsd0p3: clean, 27264084 free (348 frags, 3407967 blocks, 0.0% fr=
agmentation)
> lock order reversal:
>   1st 0xffffa00062d92810 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mou=
nt.c:1724
>   2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs=
_subr.c:2918
> lock order devfs -> ufs established at:
> #0 0xffff000000569234 at witness_checkorder+0x448
> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8
> #2 0xffff00000075ad38 at ffs_lock+0x64
> #3 0xffff0000005ed57c at _vn_lock+0x54
> #4 0xffff0000005ce630 at vfs_domount+0xdf8
> #5 0xffff0000005cca08 at vfs_donmount+0x2b4
> #6 0xffff0000005d0e78 at kernel_mount+0x4c
> #7 0xffff0000005d3564 at parse_mount+0x49c
> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc
> #9 0xffff00000048dc68 at start_init+0x24
> #10 0xffff0000004b7474 at fork_exit+0x7c
> lock order ufs -> devfs attempted at:
> #0 0xffff000000569a40 at witness_checkorder+0xc54
> #1 0xffff0000004cd560 at lockmgr_xlock+0x50
> #2 0xffff0000005ed57c at _vn_lock+0x54
> #3 0xffff0000005d77d8 at vget_finish+0x4c
> #4 0xffff0000003b1b30 at devfs_allocv+0xd0
> #5 0xffff0000003b12c0 at devfs_root+0x44
> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154
> #7 0xffff0000005d89b0 at vflush+0x5c
> #8 0xffff0000003b11c8 at devfs_unmount+0x34
> #9 0xffff0000005cf4c4 at dounmount+0x43c
> #10 0xffff0000005cf040 at kern_unmount+0x2d8
> #11 0xffff000000812d0c at do_el0_sync+0x454
> #12 0xffff0000007f2a24 at handle_el0_sync+0x90
> Mounting local filesystems:.
> ELF ldconfig path: /lib /usr/lib /usr/lib/compat
> Setting hostname: kazu.tfc.
> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1
> ukbd0 on uhub2
> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2>=
 on usbus1
> kbd1 at ukbd0
> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER=
],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
> Feeding entropy: .
> lo0: link state changed to UP
> Starting Network: lo0.
> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>          options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IP=
V6>
>          inet6 ::1 prefixlen 128
>          inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>          inet 127.0.0.1 netmask 0xff000000
>          groups: lo
>          nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
> Starting devd.
> Autoloading module: mx25l.ko
> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase =
size 4K
> Autoloading module: pwm_backlight.ko
> link_elf: symbol backlight_get_info_desc undefined
> kldload: can't load pwm_backlight.ko: No such file or directory
> Autoloading module: uhid.ko
> Autoloading module: wmt.ko
> add host 127.0.0.1: gateway lo0 fib 0: route already in table
> route: writing to routing socket: Network is unreachable
> add net default: gateway 192.168.1.254 fib 0: Network is unreachable
> add host ::1: gateway lo0 fib 0: route already in table
> add net fe80::: gateway ::1
> add net ff02::: gateway ::1
> add net ::ffff:0.0.0.0: gateway ::1
> add net ::0.0.0.0: gateway ::1
> Updating /var/run/os-release done.
> Creating and/or trimming log files.
> Updating motd:.
> Clearing /tmp (X related).
> Starting syslogd.
> No core dumps found.
> Mounting late filesystems:.
> Security policy loaded: MAC/ntpd (mac_ntpd)
> Starting ntpd.
> Feb  9 07:23:09 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-se=
conds.list'): expired 43 days ago
> Performing sanity check on sshd configuration.
> Starting sshd.
> Starting cron.
> Starting sendmail.
> Starting sendmail_msp_queue.
> Feb  9 07:23:10 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.nt=
p.org: Name does not resolve (8)
> Configuring vt: blanktime screensaverkldload: can't load logo_saver: No=
 such file or directory
> /etc/rc: WARNING: Unable to load kernel module logo_saver
> .
> Starting background file system checks in 60 seconds.
>
> Tue Feb  9 07:23:11 JST 2021
>
> FreeBSD/arm64 (kazu.tfc) (ttyu1)
>
> login:
>
>> after make. Otherwise the ACLK_VOP1 goes to 800000000, and
>>
>> we lose display.
>>
>> /Jesper
>>
>>> U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900)
>>> Trying to boot from MMC2
>>>
>>>
>>> U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900)
>>> Consoles: EFI console
>>>       Reading loader env vars from /efi/freebsd/loader.env
>>> Setting currdev to disk0p1:
>>> FreeBSD/arm64 EFI loader, Revision 1.1
>>> (Fri Jan  8 12:04:36 JST 2021 admin@lmainkx)
>>>
>>>      Command line arguments: loader.efi
>>>      Image base: 0xf3df0000
>>>      EFI version: 2.80
>>>      EFI Firmware: Das U-Boot (rev 8224.4096)
>>>      Console: comconsole (0)
>>>      Load Path: /efi\boot\bootaa64.efi
>>>      Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0=
)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC=
(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
>>> Setting currdev to disk0p1:
>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/=
HD(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000)
>>> Setting currdev to disk0p2:
>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/=
HD(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80)
>>> Setting currdev to disk0p3:
>>> Loading /boot/defaults/loader.conf
>>> Loading /boot/defaults/loader.conf
>>> Loading /boot/device.hints
>>> Loading /boot/loader.conf
>>> Loading /boot/loader.conf.local
>>> c[H[J[8;48H  [31m```                        [31;1m`[31m[9;48H s` `...=
=2E.---...[31;1m....--.```   -/[31m[10;48H +o   .--`         [31;1m/y:`  =
    +.[31m[11;48H  yo`:.            [31;1m:o      `+-[31m[12;48H   y/    =
           [31;1m-/`   -o/[31m[13;48H  .-                  [31;1m::/sy+:.=
[31m[14;48H  /                     [31;1m`--  /[31m[15;48H `:            =
              [31;1m:`[31m[16;48H `:                          [31;1m:`[31=
m[17;48H  /                          [31;1m/[31m[18;48H  .-              =
          [31;1m-.[31m[19;48H   --                      [31;1m-.[31m[20;4=
8H    `:`                  [31;1m`:`[21;48H      [31;1m.--             `-=
-.[22;48H         .---.....----.[m[1;2H  ______               ____   ____=
_ _____  [2;2H |  ____|             |  _ \ / ____|  __ \ [3;2H | |___ _ _=
_ ___  ___ | |_) | (___ | |  | |[4;2H |  ___| '__/ _ \/ _ \|  _ < \___ \|=
 |  | |[5;2H | |   | | |  __/  __/| |_) |____) | |__| |[6;2H | |   | | | =
   |    ||     |      |      |[7;2H |_|   !
>   |_| !
>>>     \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-=
----------------------------------------[22;3H---------------------------=
--------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H=
|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;4=
4H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[=
11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle =
user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5.=
 [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[3=
2mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in =
10 seconds, hit [Enter] to boot or any other key to stop
>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other k=
ey to stop
>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other k=
ey to stop
>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other k=
ey to stop
>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other k=
ey to stop
>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other k=
ey to stop
>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other k=
ey to stop
>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other k=
ey to stop
>>> [25;0HLoading kernel...
>>> /boot/kernel/kernel text=3D0x2a8 text=3D0x87de9c text=3D0x1f04bc data=
=3D0x19b3c0 data=3D0x0+0x53ffc6 syms=3D[0x8+0x116910+0x8+0x13b60e]
>>> Loading configured modules...
>>> /etc/hostid size=3D0x25
>>> /boot/entropy size=3D0x1000
>>> Using DTB provided by EFI at 0x80ec000.
>>> EFI framebuffer information:
>>> addr, size     0xf7800000, 0x3f4800
>>> dimensions     1920 x 1080
>>> stride         1920
>>> masks          0x0000f800, 0x000007e0, 0x0000001f, 0x00000000
>>> ---<<BOOT>>---
>>> KDB: debugger backends: ddb
>>> KDB: current backend: ddb
>>> Copyright (c) 1992-2020 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1=
994
>>>           The Regents of the University of California. All rights res=
erved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan  8 20:33:21 JST 2021
>>>       admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
>>> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git ll=
vmorg-11.0.0-0-g176249bd673)
>>> WARNING: WITNESS option enabled, expect reduced performance.
>>> VT(efifb): resolution 1920x1080
>>> module firmware already present!
>>> real memory  =3D 4158373888 (3965 MB)
>>> avail memory =3D 4025094144 (3838 MB)
>>> Starting CPU 1 (1)
>>> Starting CPU 2 (2)
>>> Starting CPU 3 (3)
>>> Starting CPU 4 (100)
>>> Starting CPU 5 (101)
>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
>>> random: unblocking device.
>>> random: entropy device external interface
>>> MAP f3f16000 mode 2 pages 4
>>> MAP f3f1b000 mode 2 pages 4
>>> MAP f6f40000 mode 2 pages 16
>>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeB=
SD 13.0.
>>> kbd0 at kbdmux0
>>> WARNING: Device "openfirm" is Giant locked and may be deleted before =
FreeBSD 13.0.
>>> ofwbus0: <Open Firmware Device Tree>
>>> clk_fixed0: <Fixed clock> on ofwbus0
>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff =
on ofwbus0
>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff75=
0000-0xff750fff on ofwbus0
>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0x=
ff760fff on ofwbus0
>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff =
on ofwbus0
>>> regfix0: <Fixed Regulator> on ofwbus0
>>> regfix1: <Fixed Regulator> on ofwbus0
>>> regfix2: <Fixed Regulator> on ofwbus0
>>> regfix3: <Fixed Regulator> on ofwbus0
>>> regfix4: <Fixed Regulator> on ofwbus0
>>> regfix5: <Fixed Regulator> on ofwbus0
>>> regfix6: <Fixed Regulator> on ofwbus0
>>> regfix7: <Fixed Regulator> on ofwbus0
>>> regfix8: <Fixed Regulator> on ofwbus0
>>> regfix9: <Fixed Regulator> on ofwbus0
>>> regfix10: <Fixed Regulator> on ofwbus0
>>> regfix11: <Fixed Regulator> on ofwbus0
>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xf=
f310fff on ofwbus0
>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ff=
ff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xff=
f20000-0xfff2ffff irq 18 on ofwbus0
>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ff=
ff on gic0
>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff o=
n rk_grf0
>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff =
on rk_grf1
>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq =
71 on rk_pinctrl0
>>> gpiobus0: <OFW GPIO bus> on gpio0
>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq =
72 on rk_pinctrl0
>>> gpiobus1: <OFW GPIO bus> on gpio1
>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq =
73 on rk_pinctrl0
>>> gpiobus2: <OFW GPIO bus> on gpio2
>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq =
74 on rk_pinctrl0
>>> gpiobus3: <OFW GPIO bus> on gpio3
>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq =
75 on rk_pinctrl0
>>> gpiobus4: <OFW GPIO bus> on gpio4
>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
>>> iicbus0: <OFW I2C bus> on rk_i2c0
>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
>>> iicbus1: <OFW I2C bus> on rk_i2c1
>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
>>> iicbus2: <OFW I2C bus> on rk_i2c2
>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
>>> iicbus3: <OFW I2C bus> on rk_i2c3
>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 10=
00
>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 100=
0
>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff i=
rq 35 on ofwbus0
>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on r=
k_grf1
>>> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on r=
k_grf1
>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on =
rk_grf1
>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on=
 rk_grf1
>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff =
on ofwbus0
>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff =
on ofwbus0
>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
>>> cpu0: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0
>>> cpu1: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1
>>> cpu2: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2
>>> cpu3: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3
>>> cpu4: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4
>>> cpu5: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5
>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd00000=
0-0xfdffffff irq 6,7,8 on ofwbus0
>>> pcib0: Gen1 link training timeouted: 0x00080001.
>>> pci0: <PCI bus> on pcib0
>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0
>>> pcib0: failed to reserve resource for pcib1
>>> pcib1: failed to allocate initial memory window: 0-0xfffff
>>> pci1: <PCI bus> on pcib1
>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller =
(RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
>>> rockchip_dwmmc0: Hardware version ID is 270a
>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller =
(RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
>>> rockchip_dwmmc1: Hardware version ID is 270a
>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xf=
e33ffff irq 12 on ofwbus0
>>> rk_emmcphy0: got emmcclk clock
>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, s=
etting BROKEN_TIMEOUT quirk.
>>> sdhci_fdt0: 1 slot(s) allocated
>>> mmc0: <MMC/SD bus> on sdhci_fdt0
>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on =
ofwbus0
>>> usbus0: EHCI version 1.0
>>> usbus0 on ehci0
>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on =
ofwbus0
>>> usbus1 on ohci0
>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on =
ofwbus0
>>> usbus2: EHCI version 1.0
>>> usbus2 on ehci1
>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on =
ofwbus0
>>> usbus3 on ohci1
>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on=
 rk_dwc30
>>> xhci0: 64 bytes context size, 32-bit DMA
>>> usbus4: trying to attach
>>> usbus4 on xhci0
>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on=
 rk_dwc31
>>> xhci1: 64 bytes context size, 32-bit DMA
>>> usbus5: trying to attach
>>> usbus5 on xhci1
>>> iicbus0: <unknown card> at addr 0x22
>>> iic0: <I2C generic I/O> on iicbus0
>>> iic1: <I2C generic I/O> on iicbus1
>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwb=
us0
>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwb=
us0
>>> uart1: console (1500000,n,8,1)
>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
>>> spibus0: <OFW SPI bus> on spi0
>>> spibus0: <unknown card> at cs 0 mode 0
>>> iicbus2: <unknown card> at addr 0x82
>>> iic2: <I2C generic I/O> on iicbus2
>>> iicbus3: <unknown card> at addr 0x44
>>> iic3: <I2C generic I/O> on iicbus3
>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
>>> pwmbus0: <OFW PWM bus> on pwm0
>>> pwmc0: <PWM Control> channel 0 on pwmbus0
>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
>>> pwmbus1: <OFW PWM bus> on pwm1
>>> pwmc1: <PWM Control> channel 0 on pwmbus1
>>> gpioc0: <GPIO controller> on gpio0
>>> gpioc1: <GPIO controller> on gpio1
>>> gpioc2: <GPIO controller> on gpio2
>>> gpioc3: <GPIO controller> on gpio3
>>> gpioc4: <GPIO controller> on gpio4
>>> gpioled0: <GPIO LEDs> on ofwbus0
>>> cryptosoft0: <software crypto>
>>> Timecounters tick every 1.000 msec
>>> usbus0: 480Mbps High Speed USB v2.0
>>> usbus1: 12Mbps Full Speed USB v1.0
>>> usbus2: 480Mbps High Speed USB v2.0
>>> usbus3: 12Mbps Full Speed USB v1.0
>>> usbus4: 5.0Gbps Super Speed USB v3.0
>>> usbus5: 5.0Gbps Super Speed USB v3.0
>>> ugen3.1: <Generic OHCI root HUB> at usbus3
>>> uhub0 on usbus3
>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on u=
sbus3
>>> ugen2.1: <Generic EHCI root HUB> at usbus2
>>> uhub1 on usbus2
>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on u=
sbus2
>>> ugen1.1: <Generic OHCI root HUB> at usbus1
>>> uhub2 on usbus1
>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on u=
sbus1
>>> ugen0.1: <Generic EHCI root HUB> at usbus0
>>> uhub3 on usbus0
>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on u=
sbus0
>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5
>>> uhub4 on usbus5
>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on =
usbus5
>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4
>>> uhub5 on usbus4
>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on =
usbus4
>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000>=
 at mmc0 25.0MHz/8bit/65535-block
>>> mmcsd0boot0: 4MB partition 1 at mmcsd0
>>> mmcsd0boot1: 4MB partition 2 at mmcsd0
>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0
>>> Release APs...done
>>> CPU  0: ARM Cortex-A53 r0p4 affinity:  0  0
>>>                      Cache Type =3D <64 byte D-cacheline,64 byte I-ca=
cheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>    Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL>
>>>    Instruction Set Attributes 1 =3D <>
>>>            Processor Features 0 =3D <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1=
 32,EL0 32>
>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]...
>>>            Processor Features 1 =3D <>
>>>         Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b=
it ASID,1TB PA>
>>>         Memory Model Features 1 =3D <8bit VMID>
>>>         Memory Model Features 2 =3D <32bit CCIDX,48bit VA>
>>>                Debug Features 0 =3D <2 CTX BKPTs,4 Watchpoints,6 Brea=
kpoints,PMUv3,Debugv8>
>>>                Debug Features 1 =3D <>
>>>            Auxiliary Features 0 =3D <>
>>>            Auxiliary Features 1 =3D <>
>>> CPU  1: ARM Cortex-A53 r0p4 affinity:  0  1
>>>                      Cache Type =3D <64 byte D-cacheline,64 byte I-ca=
cheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>         Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b=
it ASID,1TB PA>
>>> CPU  2: ARM Cortex-A53 r0p4 affinity:  0  2
>>>                      Cache Type =3D <64 byte D-cacheline,64 byte I-ca=
cheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>         Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b=
it ASID,1TB PA>
>>> CPU  3: ARM Cortex-A53 r0p4 affinity:  0  3
>>>                      Cache Type =3D <64 byte D-cacheline,64 byte I-ca=
cheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>         Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b=
it ASID,1TB PA>
>>> CPU  4: ARM Cortex-A72 r0p2 affinity:  1  0
>>>                      Cache Type =3D <64 byte D-cacheline,64 byte I-ca=
cheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>>         Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b=
it ASID,16TB PA>
>>> CPU  5: ARM Cortex-A72 r0p2 affinity:  1  1
>>>                      Cache Type =3D <64 byte D-cacheline,64 byte I-ca=
cheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>>         Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b=
it ASID,16TB PA>
>>> WARNING: WITNESS option enabled, expect reduced performance.
>>> Unresolved linked clock found: clkin_gmac
>>> uhub0: 1 port with 1 removable, self powered
>>> uhub2: 1 port with 1 removable, self powered
>>> uhub5: 2 ports with 2 removable, self powered
>>> uhub4: 2 ports with 2 removable, self powered
>>> Warning: no time-of-day clock registered, system time will not be set=
 accurately
>>> uhub1: 1 port with 1 removable, self powered
>>> uhub3: 1 port with 1 removable, self powered
>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339.
>>> Setting hostid: 0x5d4b60f9.
>>> Starting file system checks:
>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
>>> /dev/mmcsd0p3: clean, 27264803 free (363 frags, 3408055 blocks, 0.0% =
fragmentation)
>>> lock order reversal:
>>>    1st 0xffffa00062c99440 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_=
mount.c:1724
>>>    2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/=
vfs_subr.c:2918
>>> lock order devfs -> ufs established at:
>>> #0 0xffff000000569234 at witness_checkorder+0x448
>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8
>>> #2 0xffff00000075ad38 at ffs_lock+0x64
>>> #3 0xffff0000005ed57c at _vn_lock+0x54
>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8
>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4
>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c
>>> #7 0xffff0000005d3564 at parse_mount+0x49c
>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc
>>> #9 0xffff00000048dc68 at start_init+0x24
>>> #10 0xffff0000004b7474 at fork_exit+0x7c
>>> lock order ufs -> devfs attempted at:
>>> #0 0xffff000000569a40 at witness_checkorder+0xc54
>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50
>>> #2 0xffff0000005ed57c at _vn_lock+0x54
>>> #3 0xffff0000005d77d8 at vget_finish+0x4c
>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0
>>> #5 0xffff0000003b12c0 at devfs_root+0x44
>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154
>>> #7 0xffff0000005d89b0 at vflush+0x5c
>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34
>>> #9 0xffff0000005cf4c4 at dounmount+0x43c
>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8
>>> #11 0xffff000000812d0c at do_el0_sync+0x454
>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90
>>> Mounting local filesystems:.
>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat
>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1
>>> ukbd0 on uhub2
>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr =
2> on usbus1
>>> kbd1 at ukbd0
>>> Setting hostname: kazu.tfc.
>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETH=
ER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
>>> Feeding entropy: .
>>> lo0: link state changed to UP
>>> Starting Network: lo0.
>>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>>           options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM=
_IPV6>
>>>           inet6 ::1 prefixlen 128
>>>           inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>>>           inet 127.0.0.1 netmask 0xff000000
>>>           groups: lo
>>>           nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
>>> Starting devd.
>>> Autoloading module: mx25l.ko
>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, eras=
e size 4K
>>> Autoloading module: pwm_backlight.ko
>>> link_elf: symbol backlight_get_info_desc undefined
>>> kldload: can't load pwm_backlight.ko: No such file or directory
>>> Autoloading module: uhid.ko
>>> Autoloading module: wmt.ko
>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table
>>> route: writing to routing socket: Network is unreachable
>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable
>>> add host ::1: gateway lo0 fib 0: route already in table
>>> add net fe80::: gateway ::1
>>> add net ff02::: gateway ::1
>>> add net ::ffff:0.0.0.0: gateway ::1
>>> add net ::0.0.0.0: gateway ::1
>>> Updating /var/run/os-release done.
>>> Creating and/or trimming log files.
>>> Updating motd:.
>>> Clearing /tmp (X related).
>>> Starting syslogd.
>>> No core dumps found.
>>> Mounting late filesystems:.
>>> Security policy loaded: MAC/ntpd (mac_ntpd)
>>> Starting ntpd.
>>> Feb  8 15:24:40 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-=
seconds.list'): expired 43 days ago
>>> Performing sanity check on sshd configuration.
>>> Starting sshd.
>>> Starting cron.
>>> Starting sendmail.
>>> Starting sendmail_msp_queue.
>>> Feb  8 15:24:41 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.=
ntp.org: Name does not resolve (8)
>>> Configuring vt: blanktime screensaverkldload: can't load logo_saver: =
No such file or directory
>>> /etc/rc: WARNING: Unable to load kernel module logo_saver
>>> .
>>> Starting background file system checks in 60 seconds.
>>>
>>> Mon Feb  8 15:24:42 JST 2021
>>>
>>> FreeBSD/arm64 (kazu.tfc) (ttyu1)
>>>
>>> login:
>>>
>>>
>>>> regards
>>>>
>>>> /Jesper
>>>>
>>>>> root@kazu:~ # cu -s 1500000 -l /dev/cuaU0
>>>>> Connected
>>>>>
>>>>> U-Boot TPL 2020.10 (Feb 03 2021 - 11:13:01)
>>>>> Channel 0: LPDDR4, 50MHz
>>>>> BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D1=
6 Size=3D2048MB
>>>>> Channel 1: LPDDR4, 50MHz
>>>>> BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D1=
6 Size=3D2048MB
>>>>> 256B stride
>>>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
>>>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
>>>>> Trying to boot from BOOTROM
>>>>> Returning to boot ROM...
>>>>>
>>>>> U-Boot SPL 2020.10 (Feb 03 2021 - 11:13:01 +0900)
>>>>> Trying to boot from MMC2
>>>>>
>>>>>
>>>>> U-Boot 2020.10 (Feb 03 2021 - 11:13:01 +0900)
>>>>>
>>>>> SoC: Rockchip rk3399
>>>>> Reset cause: POR
>>>>> Model: Pine64 Pinebook Pro
>>>>> DRAM:  3.9 GiB
>>>>> PMIC:  RK808
>>>>> MMC:   mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
>>>>> Loading Environment from SPIFlash... Invalid bus 0 (err=3D-19)
>>>>> *** Warning - spi_flash_probe_bus_cs() failed, using default enviro=
nment
>>>>>
>>>>> In:    serial
>>>>> Out:   serial
>>>>> Err:   serial
>>>>> Model: Pine64 Pinebook Pro
>>>>> Net:   No ethernet found.
>>>>> Failed to load 'splash.bmp'
>>>>> Card did not respond to voltage select!
>>>>> Hit any key to stop autoboot:  0
>>>>> Consoles: EFI console
>>>>>        Read loader env vars from /efi/freebsd/loader.env
>>>>> Setting currdev to disk0p1:
>>>>> FreeBSD/arm64 EFI loader, Revision 1.1
>>>>> (Fri Jan  8 12:04:36 JST 2021 admin@lmainkx)
>>>>>
>>>>>       Command line arguments: loader.efi
>>>>>       Image base: 0xf3dee000
>>>>>       EFI version: 2.80
>>>>>       EFI Firmware: Das U-Boot (rev 8224.4096)
>>>>>       Console: comconsole (0)
>>>>>       Load Path: /efi\boot\bootaa64.efi
>>>>>       Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMM=
C(0)/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000=
)
>>>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eM=
MC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000)
>>>>> Setting currdev to disk0p1:
>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0=
)/HD(2,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x21000,0x1000000)
>>>>> Setting currdev to disk0p2:
>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0=
)/HD(3,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x1021000,0xd8d4f80)
>>>>> Setting currdev to disk0p3:
>>>>> Loading /boot/defaults/loader.conf
>>>>> Loading /boot/defaults/loader.conf
>>>>> Loading /boot/device.hints
>>>>> Loading /boot/loader.conf
>>>>> Loading /boot/loader.conf.local
>>>>> c[H[J[8;48H  [31m```                        [31;1m`[31m[9;48H s` `.=
=2E...---...[31;1m....--.```   -/[31m[10;48H +o   .--`         [31;1m/y:`=
      +.[31m[11;48H  yo`:.            [31;1m:o      `+-[31m[12;48H   y/  =
             [31;1m-/`   -o/[31m[13;48H  .-                  [31;1m::/sy+=
:.[31m[14;48H  /                     [31;1m`--  /[31m[15;48H `:          =
                [31;1m:`[31m[16;48H `:                          [31;1m:`[=
31m[17;48H  /                          [31;1m/[31m[18;48H  .-            =
            [31;1m-.[31m[19;48H   --                      [31;1m-.[31m[20=
;48H    `:`                  [31;1m`:`[21;48H      [31;1m.--             =
`--.[22;48H         .---.....----.[m[1;2H  ______               ____   __=
___ _____  [2;2H |  ____|             |  _ \ / ____|  __ \ [3;2H | |___ _=
 __ ___  ___ | |_) | (___ | |  | |[4;2H |  ___| '__/ _ \/ _ \|  _ < \___ =
\| |  | |[5;2H | |   | | |  __/  __/| |_) |____) | |__| |[6;2H | |   | | =
|    |    ||     |      |      |[7;2H |_| !
>     !
>>>    |_| !
>>>>>      \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;=
3H-----------------------------------------[22;3H------------------------=
-----------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;=
44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[1=
8;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeB=
SD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22ming=
le user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5=
H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default=
/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot =
in 10 seconds, hit [Enter] to boot or any other key to stop
>>>>> [25;0H[23;4HAutoboot in 9 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0H[23;4HAutoboot in 8 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0H[23;4HAutoboot in 7 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other=
 key to stop
>>>>> [25;0HLoading kernel...
>>>>> /boot/kernel/kernel text=3D0x2a8 text=3D0x87de9c text=3D0x1f04bc da=
ta=3D0x19b3c0 data=3D0x0+0x53ffc6 syms=3D[0x8+0x116910+0x8+0x13b60e]
>>>>> Loading configured modules...
>>>>> /etc/hostid size=3D0x25
>>>>> /boot/entropy size=3D0x1000
>>>>> Using DTB provided by EFI at 0x80ec000.
>>>>> EFI framebuffer information:
>>>>> addr, size     0xf7800000, 0x3f4800
>>>>> dimensions     1920 x 1080
>>>>> stride         1920
>>>>> masks          0x0000f800, 0x000007e0, 0x0000001f, 0x00000000
>>>>> ---<<BOOT>>---
>>>>> KDB: debugger backends: ddb
>>>>> KDB: current backend: ddb
>>>>> Copyright (c) 1992-2020 The FreeBSD Project.
>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,=
 1994
>>>>>            The Regents of the University of California. All rights =
reserved.
>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan  8 20:33:21 JST 2021
>>>>>        admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm=
64
>>>>> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git =
llvmorg-11.0.0-0-g176249bd673)
>>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>>> VT(efifb): resolution 1920x1080
>>>>> module firmware already present!
>>>>> real memory  =3D 4158377984 (3965 MB)
>>>>> avail memory =3D 4025098240 (3838 MB)
>>>>> Starting CPU 1 (1)
>>>>> Starting CPU 2 (2)
>>>>> Starting CPU 3 (3)
>>>>> Starting CPU 4 (100)
>>>>> Starting CPU 5 (101)
>>>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
>>>>> random: unblocking device.
>>>>> random: entropy device external interface
>>>>> MAP f3f16000 mode 2 pages 4
>>>>> MAP f3f1b000 mode 2 pages 4
>>>>> MAP f6f40000 mode 2 pages 16
>>>>> WARNING: Device "kbd" is Giant locked and may be deleted before Fre=
eBSD 13.0.
>>>>> kbd0 at kbdmux0
>>>>> WARNING: Device "openfirm" is Giant locked and may be deleted befor=
e FreeBSD 13.0.
>>>>> ofwbus0: <Open Firmware Device Tree>
>>>>> clk_fixed0: <Fixed clock> on ofwbus0
>>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
>>>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320ff=
f on ofwbus0
>>>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff=
750000-0xff750fff on ofwbus0
>>>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-=
0xff760fff on ofwbus0
>>>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77fff=
f on ofwbus0
>>>>> regfix0: <Fixed Regulator> on ofwbus0
>>>>> regfix1: <Fixed Regulator> on ofwbus0
>>>>> regfix2: <Fixed Regulator> on ofwbus0
>>>>> regfix3: <Fixed Regulator> on ofwbus0
>>>>> regfix4: <Fixed Regulator> on ofwbus0
>>>>> regfix5: <Fixed Regulator> on ofwbus0
>>>>> regfix6: <Fixed Regulator> on ofwbus0
>>>>> regfix7: <Fixed Regulator> on ofwbus0
>>>>> regfix8: <Fixed Regulator> on ofwbus0
>>>>> regfix9: <Fixed Regulator> on ofwbus0
>>>>> regfix10: <Fixed Regulator> on ofwbus0
>>>>> regfix11: <Fixed Regulator> on ofwbus0
>>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0=
xff310fff on ofwbus0
>>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0=
ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0x=
fff20000-0xfff2ffff irq 18 on ofwbus0
>>>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3=
ffff on gic0
>>>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff=
 on rk_grf0
>>>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xfff=
f on rk_grf1
>>>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
>>>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff ir=
q 71 on rk_pinctrl0
>>>>> gpiobus0: <OFW GPIO bus> on gpio0
>>>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff ir=
q 72 on rk_pinctrl0
>>>>> gpiobus1: <OFW GPIO bus> on gpio1
>>>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff ir=
q 73 on rk_pinctrl0
>>>>> gpiobus2: <OFW GPIO bus> on gpio2
>>>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff ir=
q 74 on rk_pinctrl0
>>>>> gpiobus3: <OFW GPIO bus> on gpio3
>>>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff ir=
q 75 on rk_pinctrl0
>>>>> gpiobus4: <OFW GPIO bus> on gpio4
>>>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0=

>>>>> iicbus0: <OFW I2C bus> on rk_i2c0
>>>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0=

>>>>> iicbus1: <OFW I2C bus> on rk_i2c1
>>>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0=

>>>>> iicbus2: <OFW I2C bus> on rk_i2c2
>>>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
>>>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0=

>>>>> iicbus3: <OFW I2C bus> on rk_i2c3
>>>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
>>>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
>>>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality =
1000
>>>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1=
000
>>>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff=
 irq 35 on ofwbus0
>>>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffffrk_=
usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff o=
n rk_grf1
>>>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff =
on rk_grf1
>>>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7ffff=
f on ofwbus0
>>>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83fff=
f on ofwbus0
>>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
>>>>> cpu0: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0
>>>>> cpu1: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1
>>>>> cpu2: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2
>>>>> cpu3: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3
>>>>> cpu4: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4
>>>>> cpu5: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5
>>>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000=
000-0xfdffffff irq 6,7,8 on ofwbus0
>>>>> pcib0: Gen1 link training timeouted: 0x00080001.
>>>>> pci0: <PCI bus> on pcib0
>>>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0
>>>>> pcib0: failed to reserve resource for pcib1
>>>>> pcib1: failed to allocate initial memory window: 0-0xfffff
>>>>> pci1: <PCI bus> on pcib1
>>>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controlle=
r (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
>>>>> rockchip_dwmmc0: Hardware version ID is 270a
>>>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controlle=
r (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
>>>>> rockchip_dwmmc1: Hardware version ID is 270a
>>>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0=
xfe33ffff irq 12 on ofwbus0
>>>>> rk_emmcphy0: got emmcclk clock
>>>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency,=
 setting BROKEN_TIMEOUT quirk.
>>>>> sdhci_fdt0: 1 slot(s) allocated
>>>>> mmc0: <MMC/SD bus> on sdhci_fdt0
>>>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 o=
n ofwbus0
>>>>> usbus0: EHCI version 1.0
>>>>> usbus0 on ehci0
>>>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 o=
n ofwbus0
>>>>> usbus1 on ohci0
>>>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 o=
n ofwbus0
>>>>> usbus2: EHCI version 1.0
>>>>> usbus2 on ehci1
>>>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 o=
n ofwbus0
>>>>> usbus3 on ohci1
>>>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
>>>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 =
on rk_dwc30
>>>>> xhci0: 64 bytes context size, 32-bit DMA
>>>>> usbus4: trying to attach
>>>>> usbus4 on xhci0
>>>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
>>>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 =
on rk_dwc31
>>>>> xhci1: 64 bytes context size, 32-bit DMA
>>>>> usbus5: trying to attach
>>>>> usbus5 on xhci1
>>>>> iicbus0: <unknown card> at addr 0x22
>>>>> iic0: <I2C generic I/O> on iicbus0
>>>>> iic1: <I2C generic I/O> on iicbus1
>>>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on of=
wbus0
>>>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on of=
wbus0
>>>>> uart1: console (1500000,n,8,1)
>>>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
>>>>> spibus0: <OFW SPI bus> on spi0
>>>>> spibus0: <unknown card> at cs 0 mode 0
>>>>> iicbus2: <unknown card> at addr 0x82
>>>>> iic2: <I2C generic I/O> on iicbus2
>>>>> iicbus3: <unknown card> at addr 0x44
>>>>> iic3: <I2C generic I/O> on iicbus3
>>>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
>>>>> pwmbus0: <OFW PWM bus> on pwm0
>>>>> pwmc0: <PWM Control> channel 0 on pwmbus0
>>>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
>>>>> pwmbus1: <OFW PWM bus> on pwm1
>>>>> pwmc1: <PWM Control> channel 0 on pwmbus1
>>>>> gpioc0: <GPIO controller> on gpio0
>>>>> gpioc1: <GPIO controller> on gpio1
>>>>> gpioc2: <GPIO controller> on gpio2
>>>>> gpioc3: <GPIO controller> on gpio3
>>>>> gpioc4: <GPIO controller> on gpio4
>>>>> gpioled0: <GPIO LEDs> on ofwbus0
>>>>> cryptosoft0: <software crypto>
>>>>> Timecounters tick every 1.000 msec
>>>>> usbus0: 480Mbps High Speed USB v2.0
>>>>> usbus1: 12Mbps Full Speed USB v1.0
>>>>> usbus2: 480Mbps High Speed USB v2.0
>>>>> usbus3: 12Mbps Full Speed USB v1.0
>>>>> usbus4: 5.0Gbps Super Speed USB v3.0
>>>>> usbus5: 5.0Gbps Super Speed USB v3.0
>>>>> ugen3.1: <Generic OHCI root HUB> at usbus3
>>>>> uhub0 on usbus3
>>>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on=
 usbus3
>>>>> ugen2.1: <Generic EHCI root HUB> at usbus2
>>>>> uhub1 on usbus2
>>>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on=
 usbus2
>>>>> ugen1.1: <Generic OHCI root HUB> at usbus1
>>>>> uhub2 on usbus1
>>>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on=
 usbus1
>>>>> ugen0.1: <Generic EHCI root HUB> at usbus0
>>>>> uhub3 on usbus0
>>>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on=
 usbus0
>>>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5
>>>>> uhub4 on usbus5
>>>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> o=
n usbus5
>>>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4
>>>>> uhub5 on usbus4
>>>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> o=
n usbus4
>>>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x000=
0> at mmc0 25.0MHz/8bit/65535-block
>>>>> mmcsd0boot0: 4MB partition 1 at mmcsd0
>>>>> mmcsd0boot1: 4MB partition 2 at mmcsd0
>>>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0
>>>>> Release APs...done
>>>>> CPU  0: ARM Cortex-A53 r0p4 affinity:  0  0
>>>>>                       Cache Type =3D <64 byte D-cacheline,64 byte I=
-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>>     Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL>
>>>>>     Instruction Set Attributes 1 =3D <>
>>>>>             Processor Features 0 =3D <GIC,AdvSIMD,FP,EL3 32,EL2 32,=
EL1 32,EL0 32>
>>>>>             Processor Features 1 =3D <>
>>>>>          Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,=
16bit ASID,1TB PA>
>>>>>          Memory Model Features 1 =3D <8bit VMID>
>>>>>          Memory Model Features 2 =3D <32bit CCIDX,48bit VA>
>>>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]...
>>>>>                 Debug Features 0 =3D <2 CTX BKPTs,4 Watchpoints,6 B=
reakpoints,PMUv3,Debugv8>
>>>>>                 Debug Features 1 =3D <>
>>>>>             Auxiliary Features 0 =3D <>
>>>>>             Auxiliary Features 1 =3D <>
>>>>> CPU  1: ARM Cortex-A53 r0p4 affinity:  0  1
>>>>>                       Cache Type =3D <64 byte D-cacheline,64 byte I=
-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>>          Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,=
16bit ASID,1TB PA>
>>>>> CPU  2: ARM Cortex-A53 r0p4 affinity:  0  2
>>>>>                       Cache Type =3D <64 byte D-cacheline,64 byte I=
-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>>          Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,=
16bit ASID,1TB PA>
>>>>> CPU  3: ARM Cortex-A53 r0p4 affinity:  0  3
>>>>>                       Cache Type =3D <64 byte D-cacheline,64 byte I=
-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>>          Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,=
16bit ASID,1TB PA>
>>>>> CPU  4: ARM Cortex-A72 r0p2 affinity:  1  0
>>>>>                       Cache Type =3D <64 byte D-cacheline,64 byte I=
-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>>>>          Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,=
16bit ASID,16TB PA>
>>>>> CPU  5: ARM Cortex-A72 r0p2 affinity:  1  1
>>>>>                       Cache Type =3D <64 byte D-cacheline,64 byte I=
-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>>>>          Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,=
16bit ASID,16TB PA>
>>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>>> Unresolved linked clock found: clkin_gmac
>>>>> uhub0: 1 port with 1 removable, self powered
>>>>> uhub2: 1 port with 1 removable, self powered
>>>>> Warning: no time-of-day clock registered, system time will not be s=
et accurately
>>>>> uhub4: 2 ports with 2 removable, self powered
>>>>> uhub5: 2 ports with 2 removable, self powered
>>>>> uhub3: 1 port with 1 removable, self powered
>>>>> uhub1: 1 port with 1 removable, self powered
>>>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339.
>>>>> Setting hostid: 0x5d4b60f9.
>>>>> Starting file system checks:
>>>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
>>>>> /dev/mmcsd0p3: clean, 27264816 free (352 frags, 3408058 blocks, 0.0=
% fragmentation)
>>>>> lock order reversal:
>>>>>     1st 0xffffa00062dabbe0 ufs (ufs, lockmgr) @ /usr/src/sys/kern/v=
fs_mount.c:1724
>>>>>     2nd 0xffffa00062c9ddc8 devfs (devfs, lockmgr) @ /usr/src/sys/ke=
rn/vfs_subr.c:2918
>>>>> lock order devfs -> ufs established at:
>>>>> #0 0xffff000000569234 at witness_checkorder+0x448
>>>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8
>>>>> #2 0xffff00000075ad38 at ffs_lock+0x64
>>>>> #3 0xffff0000005ed57c at _vn_lock+0x54
>>>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8
>>>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4
>>>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c
>>>>> #7 0xffff0000005d3564 at parse_mount+0x49c
>>>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc
>>>>> #9 0xffff00000048dc68 at start_init+0x24
>>>>> #10 0xffff0000004b7474 at fork_exit+0x7c
>>>>> lock order ufs -> devfs attempted at:
>>>>> #0 0xffff000000569a40 at witness_checkorder+0xc54
>>>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50
>>>>> #2 0xffff0000005ed57c at _vn_lock+0x54
>>>>> #3 0xffff0000005d77d8 at vget_finish+0x4c
>>>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0
>>>>> #5 0xffff0000003b12c0 at devfs_root+0x44
>>>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154
>>>>> #7 0xffff0000005d89b0 at vflush+0x5c
>>>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34
>>>>> #9 0xffff0000005cf4c4 at dounmount+0x43c
>>>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8
>>>>> #11 0xffff000000812d0c at do_el0_sync+0x454
>>>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90
>>>>> Mounting local filesystems:.
>>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat
>>>>> Setting hostname: kazu.tfc.
>>>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1
>>>>> ukbd0 on uhub2
>>>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, add=
r 2> on usbus1
>>>>> kbd1 at ukbd0
>>>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_E=
THER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
>>>>> Feeding entropy: .
>>>>> lo0: link state changed to UP
>>>>> Starting Network: lo0.
>>>>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384=

>>>>>            options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXC=
SUM_IPV6>
>>>>>            inet6 ::1 prefixlen 128
>>>>>            inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>>>>>            inet 127.0.0.1 netmask 0xff000000
>>>>>            groups: lo
>>>>>            nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
>>>>> Starting devd.
>>>>> Autoloading module: mx25l.ko
>>>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
>>>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, er=
ase size 4K
>>>>> Autoloading module: pwm_backlight.ko
>>>>> link_elf: symbol backlight_get_info_desc undefined
>>>>> kldload: can't load pwm_backlight.ko: No such file or directory
>>>>> Autoloading module: uhid.ko
>>>>> Autoloading module: wmt.ko
>>>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table
>>>>> route: writing to routing socket: Network is unreachable
>>>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachabl=
e
>>>>> add host ::1: gateway lo0 fib 0: route already in table
>>>>> add net fe80::: gateway ::1
>>>>> add net ff02::: gateway ::1
>>>>> add net ::ffff:0.0.0.0: gateway ::1
>>>>> add net ::0.0.0.0: gateway ::1
>>>>> Updating /var/run/os-release done.
>>>>> Creating and/or trimming log files.
>>>>> Updating motd:.
>>>>> Clearing /tmp (X related).
>>>>> Starting syslogd.
>>>>> No core dumps found.
>>>>> Mounting late filesystems:.
>>>>> Security policy loaded: MAC/ntpd (mac_ntpd)
>>>>> Starting ntpd.
>>>>> Feb  3 18:00:15 kazu ntpd[1004]: leapsecond file ('/var/db/ntpd.lea=
p-seconds.list'): expired 38 days ago
>>>>> Performing sanity check on sshd configuration.
>>>>> Starting sshd.
>>>>> Starting cron.
>>>>> Starting sendmail.
>>>>> Starting sendmail_msp_queue.
>>>>> Configuring vt: blanktime screensaverFeb  3 18:00:16 kazu ntpd[1004=
]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8)=

>>>>> kldload: can't load logo_saver: No such file or directory
>>>>> /etc/rc: WARNING: Unable to load kernel module logo_saver
>>>>> .
>>>>> Starting background file system checks in 60 seconds.
>>>>>
>>>>> Wed Feb  3 18:00:16 JST 2021
>>>>>
>>>>> FreeBSD/arm64 (kazu.tfc) (ttyu1)
>>>>>
>>>>> login:
>>>>>
>>>>>
>>>>> [1] https://github.com/TrueFC/ports/tree/master/sysutils/u-boot-pin=
ebook-pro
>>>>>> the twitter thread
>>>>>> https://twitter.com/jsm22413542/status/1355896239104159748
>>>>>>
>>>>>> Long story short I keep CPLL at 800000000 but set ACLK_VOP1 at 594=
000000..
>>>>>>
>>>>>>
>>>>>> /Jsm
>>>>>>
>>>>>> _______________________________________________
>>>>>> freebsd-arm@freebsd.org mailing list
>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.=
org"
>>>>>>
>>>>> ---
>>>>> Kazuhiko Kiriyama <kiri@truefc.org>
>>>> _______________________________________________
>>>> freebsd-arm@freebsd.org mailing list
>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.or=
g"
>>>>
>> _______________________________________________
>> freebsd-arm@freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"=

>>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?13e0a834-6c93-7d59-120f-59a5112fe365>