Date: Thu, 25 Aug 2016 19:31:21 +0300 From: Stanislav Galabov <sgalabov@gmail.com> To: Adrian Chadd <adrian.chadd@gmail.com> Cc: Mori Hiroki <yamori813@yahoo.co.jp>, "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: sys/mips/mediatek kernel crash on RT3050 Message-ID: <81B9B540-B1CB-406F-9F51-FDBDB451B4FC@gmail.com> In-Reply-To: <CAJ-Vmomju=NVyhcG5K2UdDwXJZX%2Bc41onn8qUqzGzBW-wYPcSQ@mail.gmail.com> References: <705503.18629.qm@web101707.mail.ssk.yahoo.co.jp> <CAJ-Vmomju=NVyhcG5K2UdDwXJZX%2Bc41onn8qUqzGzBW-wYPcSQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi all, I am currently on vacation and will be back next week. I guess I'll find som= e time to look at this then if needed. Best wishes, Stanislav > On Aug 25, 2016, at 18:25, Adrian Chadd <adrian.chadd@gmail.com> wrote: >=20 > Hm, does it require INTRNG these days? >=20 >=20 > -a >=20 >=20 >> On 24 August 2016 at 18:11, Mori Hiroki <yamori813@yahoo.co.jp> wrote: >> Hi >>=20 >> I build sys/mips/mediatek for RT3050 box at few days before head. >>=20 >> This kernel crash. >>=20 >> This build based on rt3050.dtsi. >>=20 >> Some one know this problem ? >>=20 >> Thanks. >>=20 >> Starting kernel ... >>=20 >> FDT DTB at: 0x802ce6f0 >> CPU clock: 320MHz >> Timer clock: 160MHz >> UART clock: 106MHz >>=20 >> U-Boot args (from 0 args): >> None >> Environment: >> entry: mips_init() >> RAM size: 32MB (assumed) >> Cache info: >> picache_stride =3D 4096 >> picache_loopcount =3D 8 >> pdcache_stride =3D 4096 >> pdcache_loopcount =3D 4 >> cpu0: MIPS Technologies processor v76.150 >> MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)= >> L1 i-cache: 4 ways of 256 sets, 32 bytes per line >> L1 d-cache: 4 ways of 128 sets, 32 bytes per line >> L2 cache: disabled >> Config1=3D0xbea3319e<PerfCount,WatchRegs,MIPS16,EJTAG> >> Config2=3D0x80000000 >> Config3=3D0x420 >> Physical memory chunk(s): >> 0x334000 - 0x1ffffff, 30195712 bytes (7372 pages) >> Maxmem is 0x2000000 >> Copyright (c) 1992-2016 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 12.0-CURRENT #1 ed1832a(zrouter): Sun Aug 21 12:19:54 JST 2016 >> hiroki@microserver:/storage/home/hiroki/obj/storage/home/hiroki/zroute= r/tmp/ >> mips.mipsel/storage/home/hiroki/freebsd/sys/Fon_FON2305E_FDT mips >> gcc version 4.2.1 20070831 patched [FreeBSD] >> Preloaded elf kernel "kernel" at 0x8032afb0. >> real memory =3D 33554432 (32768K bytes) >> Physical memory chunk(s): >> 0x003c0000 - 0x01f3efff, 28831744 bytes (7039 pages) >> avail memory =3D 28397568 (27MB) >> ULE: setup cpu 0 >> random: entropy device external interface >> firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0x802d86d0 >> firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0x802d2550 >> firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0x802d45d0 >> wlan: <802.11 Link Layer> >> firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0x802d6650 >> null: <full device, null device, zero device> >> openfirm: <Open Firmware control device> >> mem: <memory> >> nexus0: <MIPS32 root nexus> >> random: harvesting attach, 8 bytes (4 bits) from nexus0 >> ofwbus0: <Open Firmware Device Tree> on nexus0 >> palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on ofwbus0 >> random: harvesting attach, 8 bytes (4 bits) from palmbus0 >> random: harvesting attach, 8 bytes (4 bits) from ofwbus0 >> cpupic0: <MIPS32 Interrupt Controller> on ofwbus0 >> random: harvesting attach, 8 bytes (4 bits) from cpupic0 >> sysc0: <MTK System Controller> mem 0-0xff on palmbus0 >> random: harvesting attach, 8 bytes (4 bits) from sysc0 >> pinctrl0: <MTK Pin Controller> on ofwbus0 >> pinctrl0: GPIO mode start: 0x0000029d >> Processing 1 pin-config node(s) in pinctrl-0 for spi@b00 >> Processing 1 pin-config node(s) in pinctrl-0 for uartlite@c00 >> Processing 1 pin-config node(s) in pinctrl-0 for pinctrl >> pinctrl0: GPIO mode end : 0x0000005d >> random: harvesting attach, 8 bytes (4 bits) from pinctrl0 >> rstctrl0: <MTK Reset Controller> on ofwbus0 >> random: harvesting attach, 8 bytes (4 bits) from rstctrl0 >> clkctrl0: <MTK Clock Controller> on ofwbus0 >> random: harvesting attach, 8 bytes (4 bits) from clkctrl0 >> intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 6 on palmbus0 >> random: harvesting attach, 8 bytes (4 bits) from intc0 >> gpio0: <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 9 on palmbus0 >> gpiobus0: <OFW GPIO bus> on gpio0 >> random: harvesting attach, 8 bytes (4 bits) from gpiobus0 >> random: harvesting attach, 8 bytes (4 bits) from gpio0 >> palmbus0: <timer@100> mem 0x100-0x11f irq 4 compat ralink,rt3050-timer (n= o drive >> r attached) >> palmbus0: <watchdog@120> mem 0x120-0x12f irq 5 compat ralink,rt3050-wdt (= no driv >> er attached) >> palmbus0: <memc@300> mem 0x300-0x3ff irq 7 compat ralink,rt3050-memc (no d= river >> attached) >> palmbus0: <uart@500> mem 0x500-0x5ff irq 8 disabled compat ralink,rt3050-= uart (n >> o driver attached) >> gpioled0: <GPIO led> at pin 14 on gpiobus0 >> random: harvesting attach, 8 bytes (4 bits) from gpioled0 >> gpioled1: <GPIO led> at pin 11 on gpiobus0 >> random: harvesting attach, 8 bytes (4 bits) from gpioled1 >> gpioled2: <GPIO led> at pin 9 on gpiobus0 >> random: harvesting attach, 8 bytes (4 bits) from gpioled2 >> gpioled3: <GPIO led> at pin 12 on gpiobus0 >> random: harvesting attach, 8 bytes (4 bits) from gpioled3 >> gpioc0: <GPIO controller> on gpio0 >> random: harvesting attach, 8 bytes (4 bits) from gpioc0 >> palmbus0: <gpio@638> mem 0x638-0x65b disabled compat ralink,rt3050-gpio (= no driv >> er attached) >> palmbus0: <gpio@660> mem 0x660-0x683 disabled compat ralink,rt3050-gpio (= no driv >> er attached) >> spi0: <MTK SPI Controller (v1)> mem 0xb00-0xbff on palmbus0 >> spibus0: <OFW SPI bus> on spi0 >> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 >> mx25l0: mx25ll64, sector 65536 bytes, 128 sectors >> random: harvesting attach, 8 bytes (4 bits) from mx25l0 >> random: harvesting attach, 8 bytes (4 bits) from spibus0 >> random: harvesting attach, 8 bytes (4 bits) from spi0 >> uart0: <MTK UART Controller> mem 0xc00-0xcff irq 10 on palmbus0 >> uart0: console (57971,n,8,1) >> uart0: fast interrupt >> uart0: PPS capture mode: DCDinvalid >> random: harvesting attach, 8 bytes (4 bits) from uart0 >> ofwbus0: <usbphy> compat ralink,rt3050-usbphy (no driver attached) >> rt0: <Ralink RT3050 onChip Ethernet driver> mem 0x10100000-0x1010ffff irq= 0 on o >> fwbus0 >> rt0: RT305XF Ethernet MAC (rev 0x00000000) >> rt0: use hardcoded 00:18:e7:d5:83:90 macaddr >> rt0: bpf attached >> rt0: Ethernet address: 00:18:e7:d5:83:90 >> random: harvesting attach, 8 bytes (4 bits) from rt0 >> mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff irq 1 on ofwbus= 0 >> miibus0: <MII bus> on mtkswitch0 >> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 >> ukphy0: OUI 0x000c43, model 0x0001, rev. 7 >> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> random: harvesting attach, 8 bytes (4 bits) from ukphy0 >> random: harvesting attach, 8 bytes (4 bits) from miibus0 >> miibus1: <MII bus> on mtkswitch0 >> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 >> ukphy1: OUI 0x000c43, model 0x0001, rev. 7 >> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> random: harvesting attach, 8 bytes (4 bits) from ukphy1 >> random: harvesting attach, 8 bytes (4 bits) from miibus1 >> miibus2: <MII bus> on mtkswitch0 >> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 >> ukphy2: OUI 0x000c43, model 0x0001, rev. 7 >> ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> random: harvesting attach, 8 bytes (4 bits) from ukphy2 >> random: harvesting attach, 8 bytes (4 bits) from miibus2 >> miibus3: <MII bus> on mtkswitch0 >> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 >> ukphy3: OUI 0x000c43, model 0x0001, rev. 7 >> ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> random: harvesting attach, 8 bytes (4 bits) from ukphy3 >> random: harvesting attach, 8 bytes (4 bits) from miibus3 >> miibus4: <MII bus> on mtkswitch0 >> ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 >> ukphy4: OUI 0x000c43, model 0x0001, rev. 7 >> ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> random: harvesting attach, 8 bytes (4 bits) from ukphy4 >> random: harvesting attach, 8 bytes (4 bits) from miibus4 >> etherswitch0: <Switch controller> on mtkswitch0 >> random: harvesting attach, 8 bytes (4 bits) from etherswitch0 >> mdio0: <MDIO> on mtkswitch0 >> random: harvesting attach, 8 bytes (4 bits) from mdio0 >> random: harvesting attach, 8 bytes (4 bits) from mtkswitch0 >> ofwbus0: <wmac@10180000> mem 0x10180000-0x101bffff irq 2 compat ralink,rt= 3050-wm >> ac (no driver attached) >> ofwbus0: <otg@101c0000> mem 0x101c0000-0x101fffff irq 3 disabled compat r= alink,r >> t3050-otg (no driver attached) >> ofwbus0: <gpio-leds> compat gpio-leds (no driver attached) >> ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no driver attached) >> clock0: <Generic MIPS32 ticker> on nexus0 >> panic: Unable to add hard IRQ 7 handler >> Uptime: 1s >> Automatic reboot in 15 seconds - press a key on the console to abort >> Rebooting... >> _______________________________________________ >> freebsd-mips@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-mips >> To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org" > _______________________________________________ > freebsd-mips@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-mips > To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?81B9B540-B1CB-406F-9F51-FDBDB451B4FC>