Date: Thu, 27 Jan 2000 00:51:08 +0100 From: Andi@europe.de (Richter Andreas) To: freebsd-isdn@FreeBSD.org Subject: Isdn don`t work under 4.0-20000118-CURRENT! Message-ID: <388F886C.38C2AE4E@europe.de>
next in thread | raw e-mail | index | archive | help
Hi, on sunday i have upgrade my system to 4.0-20000118-CURRENT! Now the isdn don't work! Before i have installed FreeBSD 3.4 stable and isdn works very well! Here is the logfile for the connection! Jan 26 23:51:27 cool /kernel: isp0: lcp close(initial) Jan 26 23:51:34 cool /kernel: isp0: lcp open(initial) Jan 26 23:51:34 cool /kernel: isp0: phase establish Jan 26 23:51:34 cool /kernel: i4b: unit 0, assigned TEI = 93 = 0x5d Jan 26 23:51:37 cool /kernel: isp0: Up event Jan 26 23:51:37 cool /kernel: isp0: lcp up(starting) Jan 26 23:51:37 cool /kernel: isp0: lcp output <conf-req id=0x1 len=10 05-06-75-c6-be-25> Jan 26 23:51:38 cool /kernel: isp0: lcp input(req-sent): <conf-req id=0x61 len=15 03-05-c2-23-05-05-06-dd-d9-20-94> Jan 26 23:51:38 cool /kernel: isp0: lcp parse opts: auth-proto magic Jan 26 23:51:38 cool /kernel: isp0: lcp parse opt values: auth-proto [mine proto/0x0 != his chap] magic 0xddd92094 send conf-nak Jan 26 23:51:38 cool /kernel: isp0: lcp output <conf-nak id=0x61 len=9 03-05-c0-23-05> Jan 26 23:51:38 cool /kernel: isp0: lcp input(req-sent): <conf-req id=0x62 len=14 03-04-c0-23-05-06-dd-d9-20-94> 03-04-c0-23-05-06-dd-d9-20-94> Jan 26 23:51:56 cool /kernel: isp0: lcp parse opts: auth-proto magic Jan 26 23:51:56 cool /kernel: isp0: lcp parse opt values: auth-proto magic 0xddd92094 send conf-ack Jan 26 23:51:56 cool /kernel: isp0: lcp output <conf-ack id=0x6b len=14 03-04-c0-23-05-06-dd-d9-20-94> Jan 26 23:51:57 cool /kernel: isp0: lcp close(ack-sent) Jan 26 23:51:57 cool /kernel: isp0: lcp output <term-req id=0x2 len=4> Jan 26 23:51:57 cool /kernel: isp0: lcp input(closing): <term-ack id=0x2 len=4> Jan 26 23:51:57 cool /kernel: isp0: phase dead Jan 26 23:51:57 cool /kernel: isp0: lcp down(closed) Jan 26 23:51:57 cool /kernel: isp0: Down event (carrier loss) You can see that i could connect with my provider but the authorization fails, because the authorization protocol wouldn't detect ! I have seen in the FAQ a example of isdn connect and i have compared with my isdn connect! The differences between my isdn connect and the isdn connect in the example is, that the (req-sent) input is double so big! Then i have seen that the first 8 byte are missed! This first 8 byte are necessary to detect the authorization protocol! I don't know why this 8 byte are missed! my ISDN-Hardware: I have a isdn Fritz!Card A1! my kernel options for isdn: options "AVM_A1" device isic0 at isa? port 0x300 irq 5 flags 4 # ISDN Protocol Stack # ------------------- # # Q.921 / layer 2 - i4b passive cards D channel handling pseudo-device "i4bq921" # # Q.931 / layer 3 - i4b passive cards D channel handling pseudo-device "i4bq931" # # layer 4 - i4b common passive and active card handling pseudo-device "i4b" # # ISDN devices # ------------ # # userland driver to do ISDN tracing (for passive cards only) pseudo-device "i4btrc" 4 # # userland driver to control the whole thing pseudo-device "i4bctl" # # userland driver for access to raw B channel pseudo-device "i4brbch" 4 # # userland driver for telephony pseudo-device "i4btel" 2 # # network driver for IP over raw HDLC ISDN pseudo-device "i4bipr" 4 # enable VJ header compression detection for ipr i/f ## enable VJ header compression detection for ipr i/f options IPR_VJ # # network driver for sync PPP over ISDN pseudo-device "i4bisppp" 4 pseudo-device sppp 1 #Generic Synchronous PPP I don't know what is wrong! I don't want downgrade my system to 3.4! Please help! Thanks in advance Andreas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?388F886C.38C2AE4E>