Date: Wed, 12 Mar 1997 12:12:23 +0200 (EET) From: Petri Helenius <pete@sms.fi> To: Dino Farinacci <dino@cisco.com> Cc: dwhite@gdi.uoregon.edu, raj@cisco.com, mikel@cisco.com, bcole@jnx.com, questions@freebsd.org Subject: [raj@cisco.com: Re: 3COM Etherlink III with FreeBSD] Message-ID: <199703121012.MAA05230@silver.sms.fi> In-Reply-To: <199703120924.BAA14312@stilton.cisco.com> References: <199703120924.BAA14312@stilton.cisco.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Dino Farinacci writes: > Got your forwarded message. I have a 3c589c in my Dell Laptop and have > tried all sorts of incantations to get this to work to no avail. > > I continually get "zp0 not found at 0x300" (default) or > "zp0 not found at 0x110" (when I change the port I/O address to the ones > windows picks) at boot time. > > I've tried this on 2.1, 2.1.5, and 3.0. I tried both slots, nothing. > When I used 0x300, I disabled all other devices that used it and the > same irq (I even disconnected my CDROM which used 0x300/irq 10). > > When I tried 2.1.5, I even rebuilt the kernel. Nothing. > > How do I get a PCIC controller that is compatible for FreeBSD, or does > one not exist? > I've the 3c589 card, don't know about the revision, running 2.2-snap from sometime back and it as worked beautifully. However, remember that in some BIOSes you have to open up the memory window for the card to use. (that is at least disable shadow memory at the address range, you also may need to specify an address range that is in use by "ISA cards") Pete
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199703121012.MAA05230>