Date: Tue, 4 Mar 2003 15:43:29 +0900 From: Till Plewe <till@plewe.is.tsukuba.ac.jp> To: current@FreeBSD.ORG Subject: smp-kernel panics while booting Message-ID: <20030304064329.GA58205@plewe.is.tsukuba.ac.jp>
next in thread | raw e-mail | index | archive | help
I have 2 Xeon processors on a PDPEA (Rioworks) motherboard (http://www.rioworks.co.jp/products/pdpea.html). The generic kernel boots without problems (see output of dmesg below). When I use the SMP kernel I invariably (5.0 release, various CURRENTs, the latest cvsuped yesterday, various BIOS settings) get: CPU ... real memory ... avail memory ... Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 AP #1 (PHY# 1) failed! panic y/n [y] Uptime: 1s panic: Assertion mtx_unowned(m) failed at /usr/src/sys/kern/kern_mutex.c:966 cpuid = 0; lapic.id = 00000000 Debugger("panic") Stopped at Debugger+0x4f: xchgl %ebx,in_Debugger.0 I would be grateful for any suggestions. - Till PS Linux 2.4.18-14smp seems to work. OUTPUT OF DMESG =================================== Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #3: Mon Mar 3 20:51:39 JST 2003 till@plewe2.is.tsukuba.ac.jp:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel.gen/kernel" at 0xc069f000. Preloaded elf module "/boot/kernel.gen/acpi.ko" at 0xc069f0ac. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2392042856 Hz CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.04-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2146893824 (2047 MB) avail memory = 2082635776 (1986 MB) Allocating major#253 to "net" Allocating major#252 to "pci" Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 pcibios: BIOS version 2.10 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz can't fetch resources for \\_SB_.PCI0.LPC0.SIO_.LPT_ - AE_AML_INVALID_RESOURCE_TYPE acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel Generic host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> mem 0xf8000000-0xfbffffff at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2 pci4: <ACPI PCI bus> on pcib4 bge0: <Broadcom BCM5702X Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf0200000-0xf020ffff irq 5 at device 4.0 on pci4 bge0: Ethernet address: 00:50:45:00:96:f7 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1400-0x141f irq 11 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1420-0x143f irq 10 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1440-0x145f irq 5 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pci5: <serial bus, FireWire> at device 0.0 (no driver attached) pci5: <display, VGA> at device 1.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1460-0x146f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x378-0x37f on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x2f8-0x2ff irq 3 on acpi0 sio0: type 16550A sio1 port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad0: 78533MB <IC35L080AVVA07-0> [159560/16/63] at ata0-master UDMA100 acd0: DVD-R <HL-DT-ST DVDRAM GMA-4020B> at ata1-master PIO4 MBREXT Slice 5 on ad0s3: [0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:208782 [1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:208845 l:37640295 MBREXT Slice 6 on ad0s3: [0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:37640232 [1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:37849140 l:4080510 MBREXT Slice 7 on ad0s3: [0] f:00 typ:130 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:4080447 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 Mounting root from ufs:/dev/ad0s1a OUTPUT OF MPTABLE =================================== =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f6a60 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x2a mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x0009fd70 signature: 'PCMP' base table length: 340 version: 1.4 checksum: 0xd4 OEM ID: ' ' Product ID: 'PLACER CRB ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 34 local APIC address: 0xfee00000 extended table length: 164 extended table checksum: 222 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x14 BSP, usable 15 2 7 0xbfebfbff 6 0x14 AP, usable 15 2 7 0xbfebfbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 PCI 6 ISA -- I/O APICs: APIC ID Version State Address 2 0x20 usable 0xfec00000 3 0x20 usable 0xfec80000 4 0x20 usable 0xfec80100 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 6 0 2 0 INT active-hi edge 6 1 2 1 INT active-hi edge 6 0 2 2 INT active-hi edge 6 3 2 3 INT active-hi edge 6 4 2 4 INT active-lo level 0 29:C 2 18 INT active-hi edge 6 6 2 6 INT active-hi edge 6 7 2 7 INT active-hi edge 6 8 2 8 INT active-hi edge 6 9 2 9 INT active-lo level 0 29:B 2 19 INT active-lo level 0 29:A 2 16 INT active-hi edge 6 12 2 12 INT active-hi edge 6 13 2 13 INT active-hi edge 6 14 2 14 INT active-hi edge 6 15 2 15 INT active-lo level 0 29:D 2 23 INT active-lo level 4 4:A 4 4 INT active-lo level 5 0:A 2 21 INT active-lo level 5 1:A 2 22 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 6 0 255 0 NMI active-hi edge 6 0 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x10000 -- System Address Space bus ID: 0 address type: memory address address base: 0x80000000 address range: 0x70800000 -- System Address Space bus ID: 0 address type: prefetch address address base: 0xf0800000 address range: 0xb800000 -- System Address Space bus ID: 0 address type: memory address address base: 0xfc000000 address range: 0x2e00000 -- System Address Space bus ID: 0 address type: memory address address base: 0xfee01000 address range: 0x11ff000 -- System Address Space bus ID: 5 address type: memory address address base: 0xa0000 address range: 0x20000 -- System Address Space bus ID: 4 address type: memory address address base: 0xc8000 address range: 0x18000 -- Bus Heirarchy bus ID: 6 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000001 =============================================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030304064329.GA58205>