Date: Wed, 02 Aug 2000 19:48:56 +0100 From: "Roberto Nunnari, AGIE" <roberto.Nunnari@agie.ch> To: Udo Schweigert <ust@cert.siemens.de> Cc: Miklos Niedermayer <mico@bsd.hu>, isdn@freebsd.org Subject: Re: AVM Fritz!Card pnp Message-ID: <39886D18.5C52F840@agie.ch> References: <390EB6D8.1089A80A@agie.ch> <20000502122511.A66256@alaska.cert.siemens.de> <390EBD65.2EBDDEFA@agie.ch> <20000502124235.A66656@alaska.cert.siemens.de> <392CF53E.DE8CC0B4@agie.ch> <20000525112228.A53021@alaska.cert.siemens.de> <397C2D82.76A4F9DC@agie.ch> <20000724130727.A94126@alaska.cert.siemens.de> <20000724145702.F314@bsd.hu> <20000724214909.A1223@alaska.cert.siemens.de>
next in thread | previous in thread | raw e-mail | index | archive | help
OK.
I just took my sound card out and every thing went just fine!
I have not yet made a kernel with support for the sound card,
and that may be why there surely was a resource conflict.
Now I only need some fine tuning...
A far away day, when rain will be hitting my window, I may
decide to give that little box a voice... and you'll hear in
the deepest cyberspace a voice...
BE THE SOUND!!!
(# cd /usr/src/sys/i386/conf; /usr/sbin/config TALKIE;
cd ../../compile/TALKIE; make;make install; shutdown -r now)
'and the sound was...'
Best regards.
--
Roberto Nunnari -software engineer-
mailto:roberto.nunnari@agie.ch
AGIE - http://www.agie.com
Via dei pioppi 16 tel: +41-91-8069138
6616 Losone """
Switzerland (o o)
=======================oOO==(_)==OOo========================
MY OPNIONS ARE NOT NECESSARELY THOSE OF MY EMPLOYER
> On Wed, Jul 26, 2000 at 16:51:02 +0200, Udo Schweigert wrote:
> > This is odd. Something seems to be wrong, class 0xff and Revision 255 should
> > be Class 0x9 (if I remember right, don't have the right value here) and
> > Revision 1. These values are read from registers in the card, so this first
> > read commands from the card were wrong and the whole thing won't work.
> >
> > I think there is a resource conflict. Please check your interupts and I/O mem
> > settings in the BIOS.
> >
>
> I just had a look into my dmesg. Here is what you should see when booting:
>
> ifpnp0: <AVM Fritz!Card PnP> at port 0x240-0x25f irq 10 on isa0
> ifpnp0: AVM Fritz!Card PnP Class 0x9 Revision 1
> ifpnp0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2)
> ifpnp0: passive stack unit 0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39886D18.5C52F840>