Date: Thu, 9 Sep 1999 12:23:11 +0200 (CEST) From: rch@writeme.com To: FreeBSD-gnats-submit@freebsd.org Subject: i386/13655: sysmouse, signal 10 and XF86_S3 Message-ID: <199909091023.MAA00528@richard.eu.org>
next in thread | raw e-mail | index | archive | help
>Number: 13655 >Category: i386 >Synopsis: sysmouse, signal 10 and XF86_S3 >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Sep 9 03:30:01 PDT 1999 >Closed-Date: >Last-Modified: >Originator: Ricardas Cepas >Release: FreeBSD 3.2-STABLE i386 >Organization: >Environment: ktrace: 679 XF86_S3 RET read 1232/0x4d0 679 XF86_S3 CALL read(0x6,0x82c0008,0x225c) 679 XF86_S3 GIO fd 6 read 8796 bytes "\a8\0\0\^O<\0\0\^_>\0\0>\^_\0\0ü\^O\0\0ø\a\0\0ð\^C\0\0ð\^C\0\0ø\a\0\0ü\^O\0\0>\^_\0\0\^_>\0\0\^O<\0\0\a8\0\0\^Oð\0\ \0\^_ø\0\0?ü\0\0\^?þ\0\0þ\^?\0\0ü?\0\0ø\^_\0\0ð\^O\0\0ð\^O\0\0ø\^_\0\0ü?\0\0þ\^?\0\0\^?þ\0\0?ü\0\0\^_ø\0\0\^Oð\0\0\ ................. \08\0\0\08\0\0\08\0\0\08\0\0\08\0\0\0|\0\0\0ÿ\^A\0\0ÿ\^A\0\0ï\^A\0\0" 679 XF86_S3 RET read 8796/0x225c 679 XF86_S3 CALL break(0x82c4000) 679 XF86_S3 RET break 0 679 XF86_S3 CALL break(0x82c5000) 679 XF86_S3 RET break 0 679 XF86_S3 CALL gettimeofday(0xbfbfd30c,0) 679 XF86_S3 RET gettimeofday 0 679 XF86_S3 CALL select(0x80,0x82613e0,0,0,0xbfbfd358) 679 XF86_S3 RET select 1 679 XF86_S3 CALL read(0x3,0xbfbfd204,0x40) 679 XF86_S3 RET read -1 errno 35 Resource temporarily unavailable 679 XF86_S3 CALL read(0x5,0xbfbfd1f4,0x40) 679 XF86_S3 GIO fd 5 read 16 bytes "\M^G\0\0\^A\0\0\0\^?\M^G\0\0\^A\0\0\0\^?" 679 XF86_S3 RET read 16/0x10 679 XF86_S3 PSIG SIGBUS caught handler=0x80c3e0c mask=0x0 code=0x1d 679 XF86_S3 CALL sigaction(0xa,0xbfbfd128,0xbfbfd11c) 679 XF86_S3 RET sigaction 0 679 XF86_S3 CALL write(0x2,0xbfbfc9e8,0x15) 679 XF86_S3 GIO fd 2 wrote 21 bytes " Fatal server error: " 679 XF86_S3 RET write 21/0x15 679 XF86_S3 CALL write(0x2,0xbfbfc9f0,0x23) 679 XF86_S3 GIO fd 2 wrote 35 bytes "Caught signal 10. Server aborting dmesg: Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-STABLE #3: Thu Sep 9 10:32:05 CEST 1999 root@richard.eu.org:/usr/src/sys/compile/MYKERNEL Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 448802837 Hz CPU: Pentium III (448.80-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping=3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>,<b25>> real memory = 67108864 (65536K bytes) avail memory = 62394368 (60932K bytes) Bad SMBIOS table checksum! Preloaded elf kernel "kernel" at 0xc02bb000. Probing for devices on PCI bus 0: chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0 chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0 chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0 ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3 vga0: <S3 Trio 64 graphics accelerator> rev 0x16 int a irq 255 on pci0.8.0 Probing for devices on PCI bus 1: Probing for PnP devices: CSN 1 Vendor ID: ESS1868 [0x68187316] Serial 0xffffffff Comp ID: @@@0000 [0x00000000] ESS1868 (rev 11) pcm1 (ESS1868 <ESS1868> sn 0xffffffff) at 0x220-0x22f irq 10 drq 1 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 at 0x3e8-0x3ef irq 5 on isa sio2: type 16550A psm0 not found at 0x60 pcm0 not probed due to drq conflict with pcm1 at 1 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <ST33232A>, DMA, 32-bit, multi-block-16 wd0: 3077MB (6303024 sectors), 6253 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (atapi): <CD-532E-B/1.0A>, removable, accel, ovlap, dma, iordis acd0: drive speed 5512KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data disc loaded, unlocked wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): <NEC Corporation D3713>, 32-bit wd2: 329MB (675360 sectors), 670 cyls, 16 heads, 63 S/T, 512 B/S ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 msize 65536 on motherboard npx0: INT 16 interface IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 50000 packets/entry ccd0-3: Concatenated disk drivers changing root device to wd0s1a pid 510 (XF86_S3), uid 0: exited on signal 6 pid 534 (XF86_S3), uid 0: exited on signal 6 pid 553 (XF86_S3), uid 0: exited on signal 6 pid 571 (XF86_S3), uid 0: exited on signal 6 pid 606 (XF86_S3), uid 0: exited on signal 6 pid 645 (XF86_S3), uid 0: exited on signal 6 pid 652 (XF86_S3), uid 0: exited on signal 6 pid 679 (XF86_S3), uid 0: exited on signal 6 KERNEL: machine "i386" cpu "I586_CPU" cpu "I686_CPU" ident MYKERNEL maxusers 32 options "MAXMEM=(64*1024)" options "NTIMECOUNTER=10" options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options QUOTA #enable disk quotas options MSDOSFS #MSDOS Filesystem options "EXT2FS" options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 controller isa0 controller pnp0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 flags 0xA0ff disk wd1 at wdc0 drive 1 flags 0xA0ff controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 flags 0xA0ff disk wd3 at wdc1 drive 1 flags 0xA0ff options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM options IDE_DELAY=8000 # Be optimistic about Joe IDE device device acd0 controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts pseudo-device splash device sc0 at isa? tty options MAXCONS=16 # number of virtual consoles options "SC_MOUSE_CHAR=0x03" options "STD8X16FONT" # Compile font in makeoptions "STD8X16FONT"="lat4" options SC_HISTORY_SIZE=700 # number of history buffer lines device npx0 at isa? port "IO_NPX" iosiz 65536 irq 13 vector npxintr device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? device xl0 device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 vector pcmintr pseudo-device loop pseudo-device bpfilter 4 #Berkeley packet filter pseudo-device ether pseudo-device ppp 1 options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print information about # dropped packets options "IPFIREWALL_VERBOSE_LIMIT=50000" #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default pseudo-device tun 1 pseudo-device pty 16 #Pseudo ttys - can go as high as 256 pseudo-device gzip #Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device ccd 4 #Concatenated disk driver options KTRACE #kernel tracing options SYSVSHM options SYSVSEM options SYSVMSG options "VM86" XFree86 Version 3.3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: December 29 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 3.0-CURRENT i386 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic Using syscons driver with X support (version 2.0) (using VT number 12) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc102" (**) XKB: layout: "lt" (**) XKB: options: "grp:shift_toggle" (**) Mouse: type: SysMouse, device: /dev/mouse, buttons: 3 (**) S3: Graphics device ID: "S3Trio64V2" (**) S3: Monitor ID: "500PST" (**) FontPath set to "inet/127.0.0.1:7100" (--) S3: PCI: Trio64V2 rev 16, Linear FB @ 0xe4000000 (--) S3: chipset: Trio64V2/DX rev. 16 (--) S3: chipset driver: newmmio (--) S3: card type: PCI (--) S3: videoram: 4096k (--) S3: Ramdac type: s3_trio64v2 (--) S3: Ramdac speed: 170 MHz (--) S3: Using Trio64V2 programmable clock (MCLK 50.114 MHz) (--) S3: Maximum allowed dot-clock: 170.000 MHz (**) S3: Mode "1024x768": mode clock = 155.000 (**) S3: Using 16 bpp. Color weight: 565 (--) S3: Virtual resolution set to 1024x768 (--) S3: Local bus LAW is 0xE4000000 (--) S3: Using a banksize of 4096k, line width of 1024 (--) S3: Using a single 64x64 area at (960,769) for expanding pixmaps (--) S3: Using 16 planes of 1024x1215 at (0,833) aligned 8 as font cache Fatal server error: Caught signal 10. Server aborting Mouse: plain serial Genius 3 button, works as `auto', `mouseman' and `microsft' I don't have sio3 enabled in kernel. FreeBSD 3.2-STABLE * $Id: atkbd_isa.c,v 1.2.2.1 1999/05/09 11:02:04 yokota Exp $ * $Id: psm.c,v 1.60.2.1 1999/06/03 12:41:13 yokota Exp $ >Description: I have been runnig the same version of X and FreeBSD 3.2 and everything worked on console and X. Now after reboot ( I don't change nothing ???) mouse still works under console but when I start X and try to move mouse I get SIGBUS. I can run X if I kill moused and use /dev/cuaa0 as mouseman mouse port. >How-To-Repeat: Run XF86_S3 ? >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199909091023.MAA00528>