Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 14 Feb 2012 10:19:09 +0100
From:      Victor Balada Diaz <victor@bsdes.net>
To:        stable@FreeBSD.org
Subject:   problems with AHCI on FreeBSD 8.2
Message-ID:  <20120214091909.GP2010@equilibrium.bsdes.net>

next in thread | raw e-mail | index | archive | help

--L6iaP+gRLNZHKoI4
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit

Hello,

We're having some troubles with AHCI under FreeBSD 8.2 and 8-STABLE. The error is:

ahcich0: Timeout on slot 8
ahcich0: is 00000000 cs 00000100 ss 00000000 rs 00000100 tfd c0 serr 00000000
ahcich0: AHCI reset...
ahcich0: SATA connect time=0ms status=00000123
ahcich0: ready wait time=18ms
ahcich0: AHCI reset done: device found
(ada0:ahcich0:0:0:0): Request requeued
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): Command timed out
(ada0:ahcich0:0:0:0): Retrying command
ahcich0: Timeout on slot 8
ahcich0: is 00000000 cs 007ff000 ss 007fff00 rs 007fff00 tfd c0 serr 00000000
ahcich0: AHCI reset...
ahcich0: SATA connect time=0ms status=00000123
ahcich0: ready wait time=84ms
ahcich0: AHCI reset done: device found
(ada0:ahcich0:0:0:0): Request requeued
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): Command timed out
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): Request requeued
[...]

If we use old ATA driver we have no problems. If we just use the first disk (ada0) with ahci,
no problems either. If we use both disks (ada0 and ada1) in gmirror setup with ahci, we
got the above error. If we use both disks in gmirror with old ata driver, no problems.

Attached are both dmesgs with ata driver and with ahci.

Any ideas on what could be wrong?

Thanks a lot.
Regards.
-- 
La prueba más fehaciente de que existe vida inteligente en otros
planetas, es que no han intentado contactar con nosotros. 

--L6iaP+gRLNZHKoI4
Content-Type: text/plain; charset=us-ascii
Content-Description: dmesg-ata.txt
Content-Disposition: attachment; filename="dmesg-ata.txt"

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p5 #0: Tue Sep 27 16:49:00 UTC 2011
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80ead000.
Preloaded elf obj module "/boot/kernel/geom_journal.ko" at 0xffffffff80ead230.
Preloaded elf obj module "/boot/kernel/geom_mirror.ko" at 0xffffffff80ead8e0.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3086610956 Hz
CPU: Intel(R) Core(TM) i7 CPU         950  @ 3.07GHz (3086.61-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 12884901888 (12288 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000ee4000 - 0x00000000bf77ffff, 3196698624 bytes (780444 pages)
0x0000000100000000 - 0x00000003278effff, 9253617664 bytes (2259184 pages)
avail memory = 12388929536 (11815 MB)
ACPI APIC Table: <7522MS A7522800>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
x86bios:   IVT 0x000000-0x0004ff at 0xffffff0000000000
x86bios:  SSEG 0x010000-0x01ffff at 0xffffff800005b000
x86bios:  EBDA 0x09e000-0x09ffff at 0xffffff000009e000
x86bios:   ROM 0x0a0000-0x0effff at 0xffffff00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 5
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 6
APIC: CPU 4 has ACPI ID 3
APIC: CPU 5 has ACPI ID 7
APIC: CPU 6 has ACPI ID 4
APIC: CPU 7 has ACPI ID 8
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xfa590 00014 (v0 ACPIAM)
ACPI: RSDT 0xbf780000 0003C (v1 7522MS A7522800 20110319 MSFT 00000097)
ACPI: FACP 0xbf780200 00084 (v1 7522MS A7522800 20110319 MSFT 00000097)
ACPI: DSDT 0xbf780480 06E82 (v1  A7522 A7522800 00000800 INTL 20051117)
ACPI: FACS 0xbf78e000 00040
ACPI: APIC 0xbf780390 000AC (v1 7522MS A7522800 20110319 MSFT 00000097)
ACPI: MCFG 0xbf780440 0003C (v1 7522MS OEMMCFG  20110319 MSFT 00000097)
ACPI: OEMB 0xbf78e040 0007A (v1 7522MS A7522800 20110319 MSFT 00000097)
ACPI: HPET 0xbf78a480 00038 (v1 7522MS OEMHPET  20110319 MSFT 00000097)
ACPI: SSDT 0xbf790980 00363 (v1 DpgPmm    CpuPm 00000012 INTL 20051117)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <7522MS A7522800> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff8000026000 pa 0x4000
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
ACPI timer: 1/0 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0xBB, should be 0xBA (20100331/tbutils-354)
ACPI: SSDT 0xbf78e0c0 0223C (v1 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 0xbf790300 00678 (v1  PmRef  P001Cst 00003001 INTL 20051117)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5
  Validation          0    5   N     0  5
  After Disable       0  255   N     0  5
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   14   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   14   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   15   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   15   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    3   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 4 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3405, revid=0x13
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x3408, revid=0x13
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340a, revid=0x13
	domain=0, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340e, revid=0x13
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x342e, revid=0x13
	domain=0, bus=0, slot=20, func=0
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3422, revid=0x13
	domain=0, bus=0, slot=20, func=1
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3423, revid=0x13
	domain=0, bus=0, slot=20, func=2
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3438, revid=0x13
	domain=0, bus=0, slot=20, func=3
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a37, revid=0x00
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xbc00, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
found->	vendor=0x8086, dev=0x3a38, revid=0x00
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=15
	map[20]: type I/O Port, range 32, base 0xb880, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb880
found->	vendor=0x8086, dev=0x3a39, revid=0x00
	domain=0, bus=0, slot=26, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	map[20]: type I/O Port, range 32, base 0xb800, size  5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
found->	vendor=0x8086, dev=0x3a3c, revid=0x00
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=14
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfbbfe000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbbfe000
found->	vendor=0x8086, dev=0x3a40, revid=0x00
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a48, revid=0x00
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a34, revid=0x00
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	map[20]: type I/O Port, range 32, base 0xb480, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb480
found->	vendor=0x8086, dev=0x3a35, revid=0x00
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0xb400, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
found->	vendor=0x8086, dev=0x3a36, revid=0x00
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=14
	map[20]: type I/O Port, range 32, base 0xb080, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080
found->	vendor=0x8086, dev=0x3a3a, revid=0x00
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfbbfc000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbbfc000
found->	vendor=0x8086, dev=0x244e, revid=0x90
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a16, revid=0x00
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a22, revid=0x00
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0xb000, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xac00, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xa880, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xa800, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xa480, size  5, enabled
	map[24]: type Memory, range 32, base 0xfbbfa000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a30, revid=0x00
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=14
	map[10]: type Memory, range 64, base 0xfbbf9c00, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xc000-0xcfff
pcib2:   memory decode     0xfbc00000-0xfbcfffff
pcib2:   prefetched decode 0xd0000000-0xdfffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x1002, dev=0x68f9, revid=0x00
	domain=0, bus=2, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib2: requested memory range 0xd0000000-0xdfffffff: good
	map[18]: type Memory, range 64, base 0xfbce0000, size 17, enabled
pcib2: requested memory range 0xfbce0000-0xfbcfffff: good
	map[20]: type I/O Port, range 32, base 0xc000, size  8, enabled
pcib2: requested I/O range 0xc000-0xc0ff: in range
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0xaa68, revid=0x00
	domain=0, bus=2, slot=0, func=1
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfbcbc000, size 14, enabled
pcib2: requested memory range 0xfbcbc000-0xfbcbffff: good
pcib2: matched entry for 2.0.INTB
pcib2: slot 0 INTB hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfbce0000-0xfbcfffff irq 16 at device 0.0 on pci2
pci2: <multimedia, HDA> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x0-0x0
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xbc00-0xbc1f irq 16 at device 26.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xb800-0xb81f irq 19 at device 26.2 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbbfe000-0xfbbfe3ff irq 18 at device 26.7 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x0-0x0
pcib4:   no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib5:   domain            0
pcib5:   secondary bus     6
pcib5:   subordinate bus   6
pcib5:   I/O decode        0xe000-0xefff
pcib5:   memory decode     0xfbe00000-0xfbefffff
pcib5:   prefetched decode 0xfaf00000-0xfaffffff
pci6: <ACPI PCI bus> on pcib5
pci6: domain=0, physical bus=6
found->	vendor=0x10ec, dev=0x8168, revid=0x02
	domain=0, bus=6, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 2 messages in map 0x20
	map[10]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib5: requested I/O range 0xe800-0xe8ff: in range
	map[18]: type Memory, range 64, base 0xfbeff000, size 12, enabled
pcib5: requested memory range 0xfbeff000-0xfbefffff: good
	map[20]: type Prefetchable Memory, range 64, base 0xfaff0000, size 16, enabled
pcib5: requested memory range 0xfaff0000-0xfaffffff: good
pcib5: matched entry for 6.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbeff000-0xfbefffff,0xfaff0000-0xfaffffff irq 16 at device 0.0 on pci6
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfbeff000
re0: MSI count : 1
re0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 53
re0: using IRQ 256 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 8c:89:a5:15:6b:de
re0: [MPSAFE]
re0: [FILTER]
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb480-0xb49f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb080-0xb09f irq 18 at device 29.2 on pci0
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbbfc000-0xfbbfc3ff irq 23 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     7
pcib6:   subordinate bus   7
pcib6:   I/O decode        0x0-0x0
pcib6:   no prefetched decode
pcib6:   Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib6
pci7: domain=0, physical bus=7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa49f mem 0xfbbfa000-0xfbbfa7ff irq 19 at device 31.2 on pci0
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa480
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfbbfa000
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 6ports
ata2: <ATA channel 0> on atapci0
ata2: AHCI reset...
ata2: hardware reset ...
ata2: SATA connect time=0ms status=00000123
ata2: ready wait time=50ms
ata2: software reset port 0...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: AHCI reset...
ata3: hardware reset ...
ata3: SATA connect timeout status=00000000
ata3: AHCI reset done: phy reset found no device
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: AHCI reset...
ata4: hardware reset ...
ata4: SATA connect timeout status=00000000
ata4: AHCI reset done: phy reset found no device
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect time=0ms status=00000123
ata5: ready wait time=138ms
ata5: software reset port 0...
ata5: ready wait time=0ms
ata5: SIGNATURE: 00000101
ata5: AHCI reset done: devices=00000001
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: AHCI reset...
ata6: hardware reset ...
ata6: SATA connect timeout status=00000000
ata6: AHCI reset done: phy reset found no device
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: AHCI reset...
ata7: hardware reset ...
ata7: SATA connect timeout status=00000000
ata7: AHCI reset done: phy reset found no device
ata7: [MPSAFE]
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 55
uart0: [FILTER]
uart0: fast interrupt
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
ex_isa_identify()
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (22, 23)
est0: Can't check freq 2933, it may be invalid
est0: Invalid id16 (set, cur) = (21, 23)
est0: Can't check freq 2800, it may be invalid
est0: Invalid id16 (set, cur) = (20, 23)
est0: Can't check freq 2667, it may be invalid
est0: Invalid id16 (set, cur) = (19, 23)
est0: Can't check freq 2533, it may be invalid
est0: Invalid id16 (set, cur) = (18, 23)
est0: Can't check freq 2400, it may be invalid
est0: Invalid id16 (set, cur) = (17, 23)
est0: Can't check freq 2267, it may be invalid
est0: Invalid id16 (set, cur) = (16, 23)
est0: Can't check freq 2133, it may be invalid
est0: Invalid id16 (set, cur) = (15, 23)
est0: Can't check freq 2000, it may be invalid
est0: Invalid id16 (set, cur) = (14, 23)
est0: Can't check freq 1867, it may be invalid
est0: Invalid id16 (set, cur) = (13, 23)
est0: Can't check freq 1733, it may be invalid
est0: Invalid id16 (set, cur) = (12, 23)
est0: Can't check freq 1600, it may be invalid
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (22, 23)
est1: Can't check freq 2933, it may be invalid
est1: Invalid id16 (set, cur) = (21, 23)
est1: Can't check freq 2800, it may be invalid
est1: Invalid id16 (set, cur) = (20, 23)
est1: Can't check freq 2667, it may be invalid
est1: Invalid id16 (set, cur) = (19, 23)
est1: Can't check freq 2533, it may be invalid
est1: Invalid id16 (set, cur) = (18, 23)
est1: Can't check freq 2400, it may be invalid
est1: Invalid id16 (set, cur) = (17, 23)
est1: Can't check freq 2267, it may be invalid
est1: Invalid id16 (set, cur) = (16, 23)
est1: Can't check freq 2133, it may be invalid
est1: Invalid id16 (set, cur) = (15, 23)
est1: Can't check freq 2000, it may be invalid
est1: Invalid id16 (set, cur) = (14, 23)
est1: Can't check freq 1867, it may be invalid
est1: Invalid id16 (set, cur) = (13, 23)
est1: Can't check freq 1733, it may be invalid
est1: Invalid id16 (set, cur) = (12, 23)
est1: Can't check freq 1600, it may be invalid
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (22, 23)
est2: Can't check freq 2933, it may be invalid
est2: Invalid id16 (set, cur) = (21, 23)
est2: Can't check freq 2800, it may be invalid
est2: Invalid id16 (set, cur) = (20, 23)
est2: Can't check freq 2667, it may be invalid
est2: Invalid id16 (set, cur) = (19, 23)
est2: Can't check freq 2533, it may be invalid
est2: Invalid id16 (set, cur) = (18, 23)
est2: Can't check freq 2400, it may be invalid
est2: Invalid id16 (set, cur) = (17, 23)
est2: Can't check freq 2267, it may be invalid
est2: Invalid id16 (set, cur) = (16, 23)
est2: Can't check freq 2133, it may be invalid
est2: Invalid id16 (set, cur) = (15, 23)
est2: Can't check freq 2000, it may be invalid
est2: Invalid id16 (set, cur) = (14, 23)
est2: Can't check freq 1867, it may be invalid
est2: Invalid id16 (set, cur) = (13, 23)
est2: Can't check freq 1733, it may be invalid
est2: Invalid id16 (set, cur) = (12, 23)
est2: Can't check freq 1600, it may be invalid
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (22, 23)
est3: Can't check freq 2933, it may be invalid
est3: Invalid id16 (set, cur) = (21, 23)
est3: Can't check freq 2800, it may be invalid
est3: Invalid id16 (set, cur) = (20, 23)
est3: Can't check freq 2667, it may be invalid
est3: Invalid id16 (set, cur) = (19, 23)
est3: Can't check freq 2533, it may be invalid
est3: Invalid id16 (set, cur) = (18, 23)
est3: Can't check freq 2400, it may be invalid
est3: Invalid id16 (set, cur) = (17, 23)
est3: Can't check freq 2267, it may be invalid
est3: Invalid id16 (set, cur) = (16, 23)
est3: Can't check freq 2133, it may be invalid
est3: Invalid id16 (set, cur) = (15, 23)
est3: Can't check freq 2000, it may be invalid
est3: Invalid id16 (set, cur) = (14, 23)
est3: Can't check freq 1867, it may be invalid
est3: Invalid id16 (set, cur) = (13, 23)
est3: Can't check freq 1733, it may be invalid
est3: Invalid id16 (set, cur) = (12, 23)
est3: Can't check freq 1600, it may be invalid
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est4: Invalid id16 (set, cur) = (22, 23)
est4: Can't check freq 2933, it may be invalid
est4: Invalid id16 (set, cur) = (21, 23)
est4: Can't check freq 2800, it may be invalid
est4: Invalid id16 (set, cur) = (20, 23)
est4: Can't check freq 2667, it may be invalid
est4: Invalid id16 (set, cur) = (19, 23)
est4: Can't check freq 2533, it may be invalid
est4: Invalid id16 (set, cur) = (18, 23)
est4: Can't check freq 2400, it may be invalid
est4: Invalid id16 (set, cur) = (17, 23)
est4: Can't check freq 2267, it may be invalid
est4: Invalid id16 (set, cur) = (16, 23)
est4: Can't check freq 2133, it may be invalid
est4: Invalid id16 (set, cur) = (15, 23)
est4: Can't check freq 2000, it may be invalid
est4: Invalid id16 (set, cur) = (14, 23)
est4: Can't check freq 1867, it may be invalid
est4: Invalid id16 (set, cur) = (13, 23)
est4: Can't check freq 1733, it may be invalid
est4: Invalid id16 (set, cur) = (12, 23)
est4: Can't check freq 1600, it may be invalid
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est5: Invalid id16 (set, cur) = (22, 23)
est5: Can't check freq 2933, it may be invalid
est5: Invalid id16 (set, cur) = (21, 23)
est5: Can't check freq 2800, it may be invalid
est5: Invalid id16 (set, cur) = (20, 23)
est5: Can't check freq 2667, it may be invalid
est5: Invalid id16 (set, cur) = (19, 23)
est5: Can't check freq 2533, it may be invalid
est5: Invalid id16 (set, cur) = (18, 23)
est5: Can't check freq 2400, it may be invalid
est5: Invalid id16 (set, cur) = (17, 23)
est5: Can't check freq 2267, it may be invalid
est5: Invalid id16 (set, cur) = (16, 23)
est5: Can't check freq 2133, it may be invalid
est5: Invalid id16 (set, cur) = (15, 23)
est5: Can't check freq 2000, it may be invalid
est5: Invalid id16 (set, cur) = (14, 23)
est5: Can't check freq 1867, it may be invalid
est5: Invalid id16 (set, cur) = (13, 23)
est5: Can't check freq 1733, it may be invalid
est5: Invalid id16 (set, cur) = (12, 23)
est5: Can't check freq 1600, it may be invalid
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est6: Invalid id16 (set, cur) = (22, 23)
est6: Can't check freq 2933, it may be invalid
est6: Invalid id16 (set, cur) = (21, 23)
est6: Can't check freq 2800, it may be invalid
est6: Invalid id16 (set, cur) = (20, 23)
est6: Can't check freq 2667, it may be invalid
est6: Invalid id16 (set, cur) = (19, 23)
est6: Can't check freq 2533, it may be invalid
est6: Invalid id16 (set, cur) = (18, 23)
est6: Can't check freq 2400, it may be invalid
est6: Invalid id16 (set, cur) = (17, 23)
est6: Can't check freq 2267, it may be invalid
est6: Invalid id16 (set, cur) = (16, 23)
est6: Can't check freq 2133, it may be invalid
est6: Invalid id16 (set, cur) = (15, 23)
est6: Can't check freq 2000, it may be invalid
est6: Invalid id16 (set, cur) = (14, 23)
est6: Can't check freq 1867, it may be invalid
est6: Invalid id16 (set, cur) = (13, 23)
est6: Can't check freq 1733, it may be invalid
est6: Invalid id16 (set, cur) = (12, 23)
est6: Can't check freq 1600, it may be invalid
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est7: Invalid id16 (set, cur) = (22, 23)
est7: Can't check freq 2933, it may be invalid
est7: Invalid id16 (set, cur) = (21, 23)
est7: Can't check freq 2800, it may be invalid
est7: Invalid id16 (set, cur) = (20, 23)
est7: Can't check freq 2667, it may be invalid
est7: Invalid id16 (set, cur) = (19, 23)
est7: Can't check freq 2533, it may be invalid
est7: Invalid id16 (set, cur) = (18, 23)
est7: Can't check freq 2400, it may be invalid
est7: Invalid id16 (set, cur) = (17, 23)
est7: Can't check freq 2267, it may be invalid
est7: Invalid id16 (set, cur) = (16, 23)
est7: Can't check freq 2133, it may be invalid
est7: Invalid id16 (set, cur) = (15, 23)
est7: Can't check freq 2000, it may be invalid
est7: Invalid id16 (set, cur) = (14, 23)
est7: Can't check freq 1867, it may be invalid
est7: Invalid id16 (set, cur) = (13, 23)
est7: Can't check freq 1733, it may be invalid
est7: Invalid id16 (set, cur) = (12, 23)
est7: Can't check freq 1600, it may be invalid
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Device configuration finished.
Reducing kern.maxvnodes 766109 -> 100000
procfs registered
lapic: Divisor 2, Frequency 67100238 Hz
Timecounter "TSC" frequency 3086610956 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: setting UDMA100
ad4: 1430799MB <SAMSUNG HD154UI 1AG01118> at ata2-master UDMA100 SATA 3Gb/s
ad4: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000001
ata5: New devices: 00000001
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: setting UDMA100
ad10: 1430799MB <SAMSUNG HD154UI 1AG01118> at ata5-master UDMA100 SATA 3Gb/s
ad10: 2930277168 sectors [2907021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad10
ad10: Intel check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
GEOM_MIRROR: Device mirror/os launched (2/2).ad10: LSI (v2) check1 failed

ad10: FreeBSD check1 failed
ata6: Identifying devices: 00000000
ata6: New devices: 00000000
ata7: Identifying devices: 00000000
ata7: New devices: 00000000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #5 Launched!
cpu5 AP:
     ID: 0x05000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #7 Launched!
cpu7 AP:
     ID: 0x07000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #6 Launched!
cpu6 AP:
     ID: 0x06000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #4 Launched!
cpu4 AP:
     ID: 0x04000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 3 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 4 vector 48
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 5 vector 48
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 6 vector 48
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 7 vector 48
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
GEOM_JOURNAL: Journal 2464011986: mirror/oss1g contains data.
GEOM_JOURNAL: Journal 2464011986: mirror/oss1g contains journal.
GEOM_JOURNAL: Journal mirror/oss1g clean.
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/mirror/oss1a
ct_to_ts([2012-02-13 09:56:29]) = 1329126989.000000000
start_init: trying /sbin/init

--L6iaP+gRLNZHKoI4
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg-ahci.txt"

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p5 #0: Tue Sep 27 16:49:00 UTC 2011
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80ebd000.
Preloaded elf obj module "/boot/kernel/geom_journal.ko" at 0xffffffff80ebd230.
Preloaded elf obj module "/boot/kernel/geom_mirror.ko" at 0xffffffff80ebd8e0.
Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff80ebdf90.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3083534484 Hz
CPU: Intel(R) Core(TM) i7 CPU         950  @ 3.07GHz (3083.53-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 12884901888 (12288 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000ef5000 - 0x00000000bf77ffff, 3196628992 bytes (780427 pages)
0x0000000100000000 - 0x00000003278effff, 9253617664 bytes (2259184 pages)
avail memory = 12388859904 (11814 MB)
ACPI APIC Table: <7522MS A7522800>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 5
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 6
APIC: CPU 4 has ACPI ID 3
APIC: CPU 5 has ACPI ID 7
APIC: CPU 6 has ACPI ID 4
APIC: CPU 7 has ACPI ID 8
x86bios:   IVT 0x000000-0x0004ff at 0xffffff0000000000
x86bios:  SSEG 0x010000-0x01ffff at 0xffffff800005b000
x86bios:  EBDA 0x09e000-0x09ffff at 0xffffff000009e000
x86bios:   ROM 0x0a0000-0x0effff at 0xffffff00000a0000
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xfa590 00014 (v0 ACPIAM)
ACPI: RSDT 0xbf780000 0003C (v1 7522MS A7522800 20110319 MSFT 00000097)
ACPI: FACP 0xbf780200 00084 (v1 7522MS A7522800 20110319 MSFT 00000097)
ACPI: DSDT 0xbf780480 06E82 (v1  A7522 A7522800 00000800 INTL 20051117)
ACPI: FACS 0xbf78e000 00040
ACPI: APIC 0xbf780390 000AC (v1 7522MS A7522800 20110319 MSFT 00000097)
ACPI: MCFG 0xbf780440 0003C (v1 7522MS OEMMCFG  20110319 MSFT 00000097)
ACPI: OEMB 0xbf78e040 0007A (v1 7522MS A7522800 20110319 MSFT 00000097)
ACPI: HPET 0xbf78a480 00038 (v1 7522MS OEMHPET  20110319 MSFT 00000097)
ACPI: SSDT 0xbf790980 00363 (v1 DpgPmm    CpuPm 00000012 INTL 20051117)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <7522MS A7522800> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff8000026000 pa 0x4000
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/2 1/1 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0xBB, should be 0xBA (20100331/tbutils-354)
ACPI: SSDT 0xbf78e0c0 0223C (v1 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 0xbf790300 00678 (v1  PmRef  P001Cst 00003001 INTL 20051117)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5
  Validation          0    5   N     0  5
  After Disable       0  255   N     0  5
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   14   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   14   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   15   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   15   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    3   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 4 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3405, revid=0x13
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x3408, revid=0x13
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340a, revid=0x13
	domain=0, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340e, revid=0x13
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x342e, revid=0x13
	domain=0, bus=0, slot=20, func=0
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3422, revid=0x13
	domain=0, bus=0, slot=20, func=1
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3423, revid=0x13
	domain=0, bus=0, slot=20, func=2
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3438, revid=0x13
	domain=0, bus=0, slot=20, func=3
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a37, revid=0x00
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xbc00, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
found->	vendor=0x8086, dev=0x3a38, revid=0x00
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=15
	map[20]: type I/O Port, range 32, base 0xb880, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb880
found->	vendor=0x8086, dev=0x3a39, revid=0x00
	domain=0, bus=0, slot=26, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	map[20]: type I/O Port, range 32, base 0xb800, size  5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
found->	vendor=0x8086, dev=0x3a3c, revid=0x00
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=14
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfbbfe000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbbfe000
found->	vendor=0x8086, dev=0x3a40, revid=0x00
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a48, revid=0x00
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a34, revid=0x00
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	map[20]: type I/O Port, range 32, base 0xb480, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb480
found->	vendor=0x8086, dev=0x3a35, revid=0x00
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0xb400, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
found->	vendor=0x8086, dev=0x3a36, revid=0x00
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=14
	map[20]: type I/O Port, range 32, base 0xb080, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080
found->	vendor=0x8086, dev=0x3a3a, revid=0x00
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfbbfc000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbbfc000
found->	vendor=0x8086, dev=0x244e, revid=0x90
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a16, revid=0x00
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a22, revid=0x00
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0xb000, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xac00, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xa880, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xa800, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xa480, size  5, enabled
	map[24]: type Memory, range 32, base 0xfbbfa000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a30, revid=0x00
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=14
	map[10]: type Memory, range 64, base 0xfbbf9c00, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xc000-0xcfff
pcib2:   memory decode     0xfbc00000-0xfbcfffff
pcib2:   prefetched decode 0xd0000000-0xdfffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x1002, dev=0x68f9, revid=0x00
	domain=0, bus=2, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib2: requested memory range 0xd0000000-0xdfffffff: good
	map[18]: type Memory, range 64, base 0xfbce0000, size 17, enabled
pcib2: requested memory range 0xfbce0000-0xfbcfffff: good
	map[20]: type I/O Port, range 32, base 0xc000, size  8, enabled
pcib2: requested I/O range 0xc000-0xc0ff: in range
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0xaa68, revid=0x00
	domain=0, bus=2, slot=0, func=1
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfbcbc000, size 14, enabled
pcib2: requested memory range 0xfbcbc000-0xfbcbffff: good
pcib2: matched entry for 2.0.INTB
pcib2: slot 0 INTB hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfbce0000-0xfbcfffff irq 16 at device 0.0 on pci2
pci2: <multimedia, HDA> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x0-0x0
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xbc00-0xbc1f irq 16 at device 26.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xb800-0xb81f irq 19 at device 26.2 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbbfe000-0xfbbfe3ff irq 18 at device 26.7 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x0-0x0
pcib4:   no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib5:   domain            0
pcib5:   secondary bus     6
pcib5:   subordinate bus   6
pcib5:   I/O decode        0xe000-0xefff
pcib5:   memory decode     0xfbe00000-0xfbefffff
pcib5:   prefetched decode 0xfaf00000-0xfaffffff
pci6: <ACPI PCI bus> on pcib5
pci6: domain=0, physical bus=6
found->	vendor=0x10ec, dev=0x8168, revid=0x02
	domain=0, bus=6, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 2 messages in map 0x20
	map[10]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib5: requested I/O range 0xe800-0xe8ff: in range
	map[18]: type Memory, range 64, base 0xfbeff000, size 12, enabled
pcib5: requested memory range 0xfbeff000-0xfbefffff: good
	map[20]: type Prefetchable Memory, range 64, base 0xfaff0000, size 16, enabled
pcib5: requested memory range 0xfaff0000-0xfaffffff: good
pcib5: matched entry for 6.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbeff000-0xfbefffff,0xfaff0000-0xfaffffff irq 16 at device 0.0 on pci6
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfbeff000
re0: MSI count : 1
re0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 53
re0: using IRQ 256 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 8c:89:a5:15:6b:de
re0: [MPSAFE]
re0: [FILTER]
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb480-0xb49f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb080-0xb09f irq 18 at device 29.2 on pci0
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbbfc000-0xfbbfc3ff irq 23 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     7
pcib6:   subordinate bus   7
pcib6:   I/O decode        0x0-0x0
pcib6:   no prefetched decode
pcib6:   Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib6
pci7: domain=0, physical bus=7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH10 AHCI SATA controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa49f mem 0xfbbfa000-0xfbbfa7ff irq 19 at device 31.2 on pci0
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfbbfa000
ahci0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 64
ahci0: using IRQ 257 for MSI
ahci0: [MPSAFE]
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 6ports
ahci0: Caps2:
ahci0: EM Caps: ALHD XMT SMB LED
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [MPSAFE]
ahcich0: [ITHREAD]
ahcich0: Caps: HPCP
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [MPSAFE]
ahcich1: [ITHREAD]
ahcich1: Caps: HPCP
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [MPSAFE]
ahcich2: [ITHREAD]
ahcich2: Caps: HPCP
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [MPSAFE]
ahcich3: [ITHREAD]
ahcich3: Caps: HPCP
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [MPSAFE]
ahcich4: [ITHREAD]
ahcich4: Caps: HPCP
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [MPSAFE]
ahcich5: [ITHREAD]
ahcich5: Caps: HPCP
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 55
uart0: [FILTER]
uart0: fast interrupt
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
ex_isa_identify()
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (22, 23)
est0: Can't check freq 2933, it may be invalid
est0: Invalid id16 (set, cur) = (21, 23)
est0: Can't check freq 2800, it may be invalid
est0: Invalid id16 (set, cur) = (20, 23)
est0: Can't check freq 2667, it may be invalid
est0: Invalid id16 (set, cur) = (19, 23)
est0: Can't check freq 2533, it may be invalid
est0: Invalid id16 (set, cur) = (18, 23)
est0: Can't check freq 2400, it may be invalid
est0: Invalid id16 (set, cur) = (17, 23)
est0: Can't check freq 2267, it may be invalid
est0: Invalid id16 (set, cur) = (16, 23)
est0: Can't check freq 2133, it may be invalid
est0: Invalid id16 (set, cur) = (15, 23)
est0: Can't check freq 2000, it may be invalid
est0: Invalid id16 (set, cur) = (14, 23)
est0: Can't check freq 1867, it may be invalid
est0: Invalid id16 (set, cur) = (13, 23)
est0: Can't check freq 1733, it may be invalid
est0: Invalid id16 (set, cur) = (12, 23)
est0: Can't check freq 1600, it may be invalid
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (22, 23)
est1: Can't check freq 2933, it may be invalid
est1: Invalid id16 (set, cur) = (21, 23)
est1: Can't check freq 2800, it may be invalid
est1: Invalid id16 (set, cur) = (20, 23)
est1: Can't check freq 2667, it may be invalid
est1: Invalid id16 (set, cur) = (19, 23)
est1: Can't check freq 2533, it may be invalid
est1: Invalid id16 (set, cur) = (18, 23)
est1: Can't check freq 2400, it may be invalid
est1: Invalid id16 (set, cur) = (17, 23)
est1: Can't check freq 2267, it may be invalid
est1: Invalid id16 (set, cur) = (16, 23)
est1: Can't check freq 2133, it may be invalid
est1: Invalid id16 (set, cur) = (15, 23)
est1: Can't check freq 2000, it may be invalid
est1: Invalid id16 (set, cur) = (14, 23)
est1: Can't check freq 1867, it may be invalid
est1: Invalid id16 (set, cur) = (13, 23)
est1: Can't check freq 1733, it may be invalid
est1: Invalid id16 (set, cur) = (12, 23)
est1: Can't check freq 1600, it may be invalid
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (22, 23)
est2: Can't check freq 2933, it may be invalid
est2: Invalid id16 (set, cur) = (21, 23)
est2: Can't check freq 2800, it may be invalid
est2: Invalid id16 (set, cur) = (20, 23)
est2: Can't check freq 2667, it may be invalid
est2: Invalid id16 (set, cur) = (19, 23)
est2: Can't check freq 2533, it may be invalid
est2: Invalid id16 (set, cur) = (18, 23)
est2: Can't check freq 2400, it may be invalid
est2: Invalid id16 (set, cur) = (17, 23)
est2: Can't check freq 2267, it may be invalid
est2: Invalid id16 (set, cur) = (16, 23)
est2: Can't check freq 2133, it may be invalid
est2: Invalid id16 (set, cur) = (15, 23)
est2: Can't check freq 2000, it may be invalid
est2: Invalid id16 (set, cur) = (14, 23)
est2: Can't check freq 1867, it may be invalid
est2: Invalid id16 (set, cur) = (13, 23)
est2: Can't check freq 1733, it may be invalid
est2: Invalid id16 (set, cur) = (12, 23)
est2: Can't check freq 1600, it may be invalid
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (22, 23)
est3: Can't check freq 2933, it may be invalid
est3: Invalid id16 (set, cur) = (21, 23)
est3: Can't check freq 2800, it may be invalid
est3: Invalid id16 (set, cur) = (20, 23)
est3: Can't check freq 2667, it may be invalid
est3: Invalid id16 (set, cur) = (19, 23)
est3: Can't check freq 2533, it may be invalid
est3: Invalid id16 (set, cur) = (18, 23)
est3: Can't check freq 2400, it may be invalid
est3: Invalid id16 (set, cur) = (17, 23)
est3: Can't check freq 2267, it may be invalid
est3: Invalid id16 (set, cur) = (16, 23)
est3: Can't check freq 2133, it may be invalid
est3: Invalid id16 (set, cur) = (15, 23)
est3: Can't check freq 2000, it may be invalid
est3: Invalid id16 (set, cur) = (14, 23)
est3: Can't check freq 1867, it may be invalid
est3: Invalid id16 (set, cur) = (13, 23)
est3: Can't check freq 1733, it may be invalid
est3: Invalid id16 (set, cur) = (12, 23)
est3: Can't check freq 1600, it may be invalid
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est4: Invalid id16 (set, cur) = (22, 23)
est4: Can't check freq 2933, it may be invalid
est4: Invalid id16 (set, cur) = (21, 23)
est4: Can't check freq 2800, it may be invalid
est4: Invalid id16 (set, cur) = (20, 23)
est4: Can't check freq 2667, it may be invalid
est4: Invalid id16 (set, cur) = (19, 23)
est4: Can't check freq 2533, it may be invalid
est4: Invalid id16 (set, cur) = (18, 23)
est4: Can't check freq 2400, it may be invalid
est4: Invalid id16 (set, cur) = (17, 23)
est4: Can't check freq 2267, it may be invalid
est4: Invalid id16 (set, cur) = (16, 23)
est4: Can't check freq 2133, it may be invalid
est4: Invalid id16 (set, cur) = (15, 23)
est4: Can't check freq 2000, it may be invalid
est4: Invalid id16 (set, cur) = (14, 23)
est4: Can't check freq 1867, it may be invalid
est4: Invalid id16 (set, cur) = (13, 23)
est4: Can't check freq 1733, it may be invalid
est4: Invalid id16 (set, cur) = (12, 23)
est4: Can't check freq 1600, it may be invalid
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est5: Invalid id16 (set, cur) = (22, 23)
est5: Can't check freq 2933, it may be invalid
est5: Invalid id16 (set, cur) = (21, 23)
est5: Can't check freq 2800, it may be invalid
est5: Invalid id16 (set, cur) = (20, 23)
est5: Can't check freq 2667, it may be invalid
est5: Invalid id16 (set, cur) = (19, 23)
est5: Can't check freq 2533, it may be invalid
est5: Invalid id16 (set, cur) = (18, 23)
est5: Can't check freq 2400, it may be invalid
est5: Invalid id16 (set, cur) = (17, 23)
est5: Can't check freq 2267, it may be invalid
est5: Invalid id16 (set, cur) = (16, 23)
est5: Can't check freq 2133, it may be invalid
est5: Invalid id16 (set, cur) = (15, 23)
est5: Can't check freq 2000, it may be invalid
est5: Invalid id16 (set, cur) = (14, 23)
est5: Can't check freq 1867, it may be invalid
est5: Invalid id16 (set, cur) = (13, 23)
est5: Can't check freq 1733, it may be invalid
est5: Invalid id16 (set, cur) = (12, 23)
est5: Can't check freq 1600, it may be invalid
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est6: Invalid id16 (set, cur) = (22, 23)
est6: Can't check freq 2933, it may be invalid
est6: Invalid id16 (set, cur) = (21, 23)
est6: Can't check freq 2800, it may be invalid
est6: Invalid id16 (set, cur) = (20, 23)
est6: Can't check freq 2667, it may be invalid
est6: Invalid id16 (set, cur) = (19, 23)
est6: Can't check freq 2533, it may be invalid
est6: Invalid id16 (set, cur) = (18, 23)
est6: Can't check freq 2400, it may be invalid
est6: Invalid id16 (set, cur) = (17, 23)
est6: Can't check freq 2267, it may be invalid
est6: Invalid id16 (set, cur) = (16, 23)
est6: Can't check freq 2133, it may be invalid
est6: Invalid id16 (set, cur) = (15, 23)
est6: Can't check freq 2000, it may be invalid
est6: Invalid id16 (set, cur) = (14, 23)
est6: Can't check freq 1867, it may be invalid
est6: Invalid id16 (set, cur) = (13, 23)
est6: Can't check freq 1733, it may be invalid
est6: Invalid id16 (set, cur) = (12, 23)
est6: Can't check freq 1600, it may be invalid
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est7: Invalid id16 (set, cur) = (22, 23)
est7: Can't check freq 2933, it may be invalid
est7: Invalid id16 (set, cur) = (21, 23)
est7: Can't check freq 2800, it may be invalid
est7: Invalid id16 (set, cur) = (20, 23)
est7: Can't check freq 2667, it may be invalid
est7: Invalid id16 (set, cur) = (19, 23)
est7: Can't check freq 2533, it may be invalid
est7: Invalid id16 (set, cur) = (18, 23)
est7: Can't check freq 2400, it may be invalid
est7: Invalid id16 (set, cur) = (17, 23)
est7: Can't check freq 2267, it may be invalid
est7: Invalid id16 (set, cur) = (16, 23)
est7: Can't check freq 2133, it may be invalid
est7: Invalid id16 (set, cur) = (15, 23)
est7: Can't check freq 2000, it may be invalid
est7: Invalid id16 (set, cur) = (14, 23)
est7: Can't check freq 1867, it may be invalid
est7: Invalid id16 (set, cur) = (13, 23)
est7: Can't check freq 1733, it may be invalid
est7: Invalid id16 (set, cur) = (12, 23)
est7: Can't check freq 1600, it may be invalid
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Device configuration finished.
Reducing kern.maxvnodes 766105 -> 100000
procfs registered
lapic: Divisor 2, Frequency 67033358 Hz
Timecounter "TSC" frequency 3083534484 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ahcich0: AHCI reset...
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ahcich0: SATA connect time=0ms status=00000123
ahcich0: ready wait time=2ms
ahcich0: AHCI reset done: device found
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
ahcich1: AHCI reset...
ahcich1: SATA connect timeout status=00000000
ahcich1: AHCI reset done: phy reset found no device
ahcich2: AHCI reset...
ahcich2: SATA connect timeout status=00000000
ahcich2: AHCI reset done: phy reset found no device
ahcich3: AHCI reset...
ahcich3: SATA connect time=0ms status=00000123
ahcich3: ready wait time=7ms
ahcich3: AHCI reset done: device found
(aprobe0:ahcich3:0:0:0): SIGNATURE: 0000
ahcich4: AHCI reset...
ahcich4: SATA connect timeout status=00000000
ahcich4: AHCI reset done: phy reset found no device
ahcich5: AHCI reset...
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ahcich5: SATA connect timeout status=00000000
ahcich5: AHCI reset done: phy reset found no device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG HD154UI 1AG01118> ATA-7 SATA 2.x device
ada0: Serial Number S24EJ9BB200080
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <SAMSUNG HD154UI 1AG01118> ATA-7 SATA 2.x device
ada1: Serial Number S24EJ9BB200082
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <SAMSUNG HD154UI 1AG01118> ATA-7 SATA 2.x device
pass0: Serial Number S24EJ9BB200080GEOM: new disk ada0
GEOM: new disk ada1

pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahcich3 bus 0 scbus3 target 0 lun 0
pass1: <SAMSUNG HD154UI 1AG01118> ATA-7 SATA 2.x device
pass1: Serial Number S24EJ9BB200082
pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #7 Launched!
cpu7 AP:
     ID: 0x07000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #6 Launched!
cpu6 AP:
     ID: 0x06000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #5 Launched!
cpu5 AP:
     ID: 0x05000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #4 Launched!
cpu4 AP:
     ID: 0x04000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 3 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 4 vector 48
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 5 vector 48
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 6 vector 48
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 7 vector 48
msi: Assigning MSI IRQ 257 to local APIC 1 vector 49
GEOM_MIRROR: Device mirror/os launched (2/2).
GEOM_JOURNAL: Journal 2464011986: mirror/oss1g contains data.
GEOM_JOURNAL: Journal 2464011986: mirror/oss1g contains journal.
GEOM_JOURNAL: Journal mirror/oss1g clean.
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/mirror/oss1a
ct_to_ts([2012-02-13 10:04:58]) = 1329127498.000000000
start_init: trying /sbin/init
re0: link state changed to UP

--L6iaP+gRLNZHKoI4--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120214091909.GP2010>