Date: Fri, 11 Feb 2000 13:40:01 -0600 (CST) From: David Hansen <dhansen@salug.org> To: freebsd-questions <freebsd-questions@FreeBSD.ORG> Subject: freebsd 3.4 and pcmcia support Message-ID: <Pine.LNX.4.02.10002111156450.10961-100000@spaceghost.salug.org>
next in thread | raw e-mail | index | archive | help
I've been trying to get a pcmcia 3com 3c589d ethernet card recognized by
freebsd and have not had any luck so far (on a micron transport vlx).
I have verified that the cards default values are configured to irq 10 and
a memory address of 300. Does anyone know what is set wrong here or what
else I need to look at?
*************
relevant dmesg output:
-----with bios PNP OS option set to "yes"-----
ze0 not found at 0x300
zp0 not found at 0x300
kldload: can't load pcic: No such file or directory
pccardc: /dev/card0: Device not configured
Enable PC-card.Doing initial network setup: hostname.
lo0 flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
------with bios PNP OS option set to "no"------
ze: slot 0: no card in slot
ze: pcmcia slot 1:
ze0 not found at 0x300
zp: slot 0: no card in slot
zp: pcmcia slot 1:
zp0 not found at 0x300
kldload: can't load pcic: No such file or directory
pccardc: /dev/card0: Device not configured
Enable PC-card.Doing initial network setup: hostname.
lo0 flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
************
************
output of ifconfig -a
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
lo0: flags=8049(UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
************
***********
contents of /etc/pccard.conf
io 0x240-0x360
irq 3 10 11 13 15
memory 0xd4000 96k
#3com 3c589d entry from pccard.conf.sample changed "ep0" to "zp0"
card "3Com Corporation" "3C589D"
config 0x1 "zp0" ?
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether zp0
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig zp0 delete
************
***********
relevant contents of /etc/rc.conf
pccard_conf="/etc/pccard.conf"
pccard_enable="YES"
pccard_ifconfig="zp0"
pccard_mem="DEFAULT"
************
************
relevant contents of /etc/defaults/rc.conf
pccard_enable="YES"
pccard_mem="DEFAULT"
pccardd_flags=""
************
************
relevant contents of /usr/src/sys/i386/conf/MYKERNEL3
(not so relevant)
machine "i386"
cpu "I586_CPU"
ident GENERIC
maxusers 32
(ok, here's the relevant portions)
# PCCARD (PCMCIA) support
#controller card0
#device pcic0 at card?
#device pcic1 at card? (all 3 lines are commented out)
# The following Ethernet NICs are all PCI devices.
# (i commented all of these entries out)
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# (etc... the following are the ones that i did not comment out. i only
# commented out ed0, ep0, and xe0 in this attempt. i have also gone so
# far as to comment out all entries except the zp0 entry.)
device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
device ex0 at isa? port? net irq?
device fe0 at isa? port 0x300 net irq ?
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 net irq 10 drq 0
device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
device cs0 at isa? port 0x30 net irq ?
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.02.10002111156450.10961-100000>