Date: Sun, 11 Jun 2006 23:53:46 +0000 From: John L.Utz III <john@utzweb.net> To: freebsd-acpi@freebsd.org Subject: Latitude C400 FBSD 6.1 "Fn Key"'s work sans ACPI, not with Message-ID: <8664j7xn91.wl%john@utzweb.net>
next in thread | raw e-mail | index | archive | help
Hello;
Dell Latitude's have a collection of functions that are accessible via an 'Fn' key.
These functions include things like accessing the bios by pressing Fn+F1.
These keys work nicely without ACPI and (with the exception of the suspend combo Fn+Esc) do *not* work when the machine is booted with acpi enabled
I have included the 2 compiler warnings and 3 dmesg, i will send the asl file if requested, tnx for any thoughts you may have!
Compilation:
spaz@minime$ iasl latC400.asl
Intel ACPI Component Architecture
ASL Optimizing Compiler / AML Disassembler version 20041119 [May 7 2006]
Copyright (C) 2000 - 2004 Intel Corporation
Supports ACPI Specification Revision 2.0c
latC400.asl 726: Method (\_WAK, 1, NotSerialized)
Warning 2026 - ^ Reserved method must return a value (_WAK)
latC400.asl 2698: Return (Package (0x00) {})
Warning 2018 - Effective AML package length is zero ^
ASL Input: latC400.asl - 3283 lines, 99492 bytes, 1255 keywords
AML Output: DSDT.aml - 12821 bytes 477 named objects 778 executable opcodes
Compilation complete. 0 Errors, 2 Warnings, 0 Remarks, 393 Optimizations
DMESGS:
No ACPI
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #2: Wed May 31 07:26:51 UTC 2006
spaz@minime.hsd1.wa.comcast.net.:/usr/src/sys/i386/compile/MINIME
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz (1196.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535674880 (510 MB)
avail memory = 514846720 (490 MB)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830M (830M GMCH) SVGA controller> mem 0xe0000000-0xe7ffffff,0xf4f80000-0xf4ffffff irq 11 at device 2.0 on pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xfafffc00-0xfafffc7f irq 11 at device 0.0 on pci2
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:08:74:21:ba:7e
cbb0: <TI1410 PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc80-0xdcbf irq 11 at device 31.5 on pci0
pcm0: <Cirrus Logic CS4205 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xccfff,0xcd000-0xcd7ff,0xcd800-0xcdfff,0xce000-0xce7ff,0xce800-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <SMCf010> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounter "TSC" frequency 1196019519 Hz quality 800
Timecounters tick every 1.000 msec
an0: <Cisco Systems 350 Series Wireless LAN Adapter> at port 0xe000-0xe03f irq 11 function 0 config 5 on pccard0
an0: got RSSI <-> dBM map
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: Ethernet address: 00:0e:84:b4:5e:44
an0: [GIANT-LOCKED]
ad0: 38154MB <IC25N040ATCS04 0 CA4OA72A> at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s2a
ACPI
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #2: Wed May 31 07:26:51 UTC 2006
spaz@minime.hsd1.wa.comcast.net.:/usr/src/sys/i386/compile/MINIME
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz (1196.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535674880 (510 MB)
avail memory = 514838528 (490 MB)
acpi0: <DELL CPi R > on motherboard
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82830M (830M GMCH) SVGA controller> mem 0xe0000000-0xe7ffffff,0xf4f80000-0xf4ffffff irq 11 at device 2.0 on pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xfafffc00-0xfafffc7f irq 11 at device 0.0 on pci2
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:08:74:21:ba:7e
cbb0: <TI1410 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc80-0xdcbf irq 9 at device 31.5 on pci0
pcm0: <Cirrus Logic CS4205 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff,0x280-0x287 irq 3 drq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xccfff,0xcd000-0xcd7ff,0xcd800-0xcdfff,0xce000-0xce7ff,0xce800-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1196020136 Hz quality 800
Timecounters tick every 1.000 msec
an0: <Cisco Systems 350 Series Wireless LAN Adapter> at port 0xe000-0xe03f irq 11 function 0 config 5 on pccard0
an0: got RSSI <-> dBM map
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: Ethernet address: 00:0e:84:b4:5e:44
an0: [GIANT-LOCKED]
ad0: 38154MB <IC25N040ATCS04 0 CA4OA72A> at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s2a
ACPI verbose boot:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #2: Wed May 31 07:26:51 UTC 2006
spaz@minime.hsd1.wa.comcast.net.:/usr/src/sys/i386/compile/MINIME
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0889000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0889160.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc088920c.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc08892b8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0889360.
Calibrating clock(s) ... i8254 clock: 1193191 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1196018949 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz (1196.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535674880 (510 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f5a8fff, 513294336 bytes (125316 pages)
avail memory = 514838528 (490 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc00e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
nfslock: pseudo-device
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fbbb0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 B 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 D 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
atpic: Programming IRQ9 as level/low
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 29 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 29 func 2
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 9 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 9 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9 10 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 7
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 9 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 9 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9 10 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 7 9 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 7 9 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 10 11
ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.31.INTA at func 1: 255
ACPI: Found matching pin for 0.31.INTB at func 5: 11
pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid
ACPI: Found matching pin for 0.29.INTA at func 0: 11
ACPI: Found matching pin for 0.2.INTA at func 0: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3575, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3577, revid=0x04
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 3, range 32, base e0000000, size 27, enabled
map[14]: type 1, range 32, base f4f80000, size 19, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found-> vendor=0x8086, dev=0x3577, revid=0x00
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x0b (2750 ns)
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 3, range 32, base d8000000, size 27, enabled
map[14]: type 1, range 32, base f4f00000, size 19, enabled
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000bf80, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, memory disabled
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 4, range 32, base 0000d800, size 8, enabled
map[14]: type 4, range 32, base 0000dc80, size 6, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0)
pci_link1: Picked IRQ 9 with weight 0
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB
found-> vendor=0x8086, dev=0x2486, revid=0x02
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 4, range 32, base 0000dc00, size 7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0)
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB
agp0: <Intel 82830M (830M GMCH) SVGA controller> mem 0xe0000000-0xe7ffffff,0xf4f80000-0xf4ffffff irq 11 at device 2.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xf4f80000
agp0: detected 892k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 16
pcib1: I/O decode 0xe000-0xffff
pcib1: memory decode 0xf6000000-0xfdffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: Subtractively decoded bridge.
ACPI: Found matching pin for 2.1.INTA at func 0: 255
ACPI: Found matching pin for 2.0.INTA at func 0: 11
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000ec80, size 7, enabled
pcib1: (null) requested I/O range 0xec80-0xecff: in range
map[14]: type 1, range 32, base fafffc00, size 7, enabled
pcib1: (null) requested memory range 0xfafffc00-0xfafffc7f: good
pcib1: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0)
pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC
found-> vendor=0x104c, dev=0xac50, revid=0x02
bus=2, slot=1, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xfafffc00-0xfafffc7f irq 11 at device 0.0 on pci2
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xfafffc00
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:08:74:21:ba:7e
xl0: [MPSAFE]
cbb0: <TI1410 PCI-CardBus Bridge> at device 1.0 on pci2
pcib1: cbb0 requested memory range 0xf6000000-0xfdffffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0)
pcib1: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac50104c 0x02100007 0x06070002 0x00022008
0x10: 0xf6000000 0x020000a0 0x20050500 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x00c81028 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0024f025 0x00000000 0x00000000 0x012c1222
0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x00000001 0x0000001f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x0
ata1: [MPSAFE]
pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc80-0xdcbf irq 9 at device 31.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc80
pcm0: [MPSAFE]
pcm0: <Cirrus Logic CS4205 AC97 Codec (id = 0x4352595b)>
pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, variable rate mic, AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 1f374000, 4000; 0xdd6e2000 -> 1f374000
pcm0: sndbuf_setmap 1f36c000, 4000; 0xdd6e6000 -> 1f36c000
pcm0: sndbuf_setmap 1f365000, 4000; 0xdd6ea000 -> 1f365000
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff,0x280-0x287 irq 3 drq 3 on acpi0
sio1: type 16550A
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xccfff,0xcd000-0xcd7ff,0xcd800-0xcdfff,0xce000-0xce7ff,0xce800-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1196018949 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
pcib1: pccard0 requested memory range 0xf6000000-0xfdffffff: good
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Cisco Systems, 350 Series Wireless LAN Adapter
pccard0: Manufacturer code 0x15f, product 0xa
pccard0: function 0: network adapter, ccr addr 3e0 mask 7
pccard0: function 0, config table entry 5: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqlevel
pcib1: pccard0 requested I/O range 0xe000-0xffff: in range
pcib1: pccard0 requested memory range 0xf6000000-0xfdffffff: good
an0: <Cisco Systems 350 Series Wireless LAN Adapter> at port 0xe000-0xe03f irq 11 function 0 config 5 on pccard0
an0: got RSSI <-> dBM map
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: bpf attached
an0: Ethernet address: 00:0e:84:b4:5e:44
an0: [GIANT-LOCKED]
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on ICH3 chip
ad0: setting UDMA100 on ICH3 chip
ad0: 38154MB <IC25N040ATCS04 0 CA4OA72A> at ata0-master UDMA100
ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue
pcm0: measured ac97 link rate at 48015 Hz, will use 48000 Hz
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
GEOM: new disk ad0
Trying to mount root from ufs:/dev/ad0s2a
battery0: battery initialization done, tried 1 times
start_init: trying /sbin/init
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
Linux ELF exec handler installed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8664j7xn91.wl%john>