From owner-freebsd-amd64@FreeBSD.ORG Fri Mar 25 09:46:10 2005 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D51BF16A4CE for ; Fri, 25 Mar 2005 09:46:10 +0000 (GMT) Received: from tigra.ip.net.ua (tigra.ip.net.ua [82.193.96.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2CE8F43D1D for ; Fri, 25 Mar 2005 09:46:09 +0000 (GMT) (envelope-from ru@ip.net.ua) Received: from localhost (rocky.ip.net.ua [82.193.96.2]) by tigra.ip.net.ua (8.12.11/8.12.11) with ESMTP id j2P9k5U6016572; Fri, 25 Mar 2005 11:46:05 +0200 (EET) (envelope-from ru@ip.net.ua) Received: from tigra.ip.net.ua ([82.193.96.10]) by localhost (rocky.ipnet [82.193.96.2]) (amavisd-new, port 10024) with LMTP id 40160-01; Fri, 25 Mar 2005 11:46:21 +0200 (EET) Received: from heffalump.ip.net.ua (heffalump.ip.net.ua [82.193.96.213]) by tigra.ip.net.ua (8.12.11/8.12.11) with ESMTP id j2P9k2UP016559 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 25 Mar 2005 11:46:03 +0200 (EET) (envelope-from ru@ip.net.ua) Received: (from ru@localhost) by heffalump.ip.net.ua (8.13.1/8.13.1) id j2P9kNmb076790; Fri, 25 Mar 2005 11:46:23 +0200 (EET) (envelope-from ru) Date: Fri, 25 Mar 2005 11:46:18 +0200 From: Ruslan Ermilov To: Dag-Erling Sm?rgrav Message-ID: <20050325094618.GA76747@ip.net.ua> References: <86ll8dgnx3.fsf@xps.des.no> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="yNb1oOkm5a9FJOVX" Content-Disposition: inline In-Reply-To: <86ll8dgnx3.fsf@xps.des.no> User-Agent: Mutt/1.5.9i X-Virus-Scanned: by amavisd-new at ip.net.ua cc: amd64@freebsd.org Subject: Re: testers wanted X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Mar 2005 09:46:10 -0000 --yNb1oOkm5a9FJOVX Content-Type: multipart/mixed; boundary="8t9RHnE3ZwKMSgU+" Content-Disposition: inline --8t9RHnE3ZwKMSgU+ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi DES, On Thu, Mar 24, 2005 at 02:43:04PM +0100, Dag-Erling Sm?rgrav wrote: > I need someone with an nForce3-based Opteron box running -CURRENT to > do the following: >=20 > - upgrade to a recent -CURRENT, verify that a GENERIC kernel with > NO_MIXED_MODE removed works properly *with apic enabled* >=20 Looks like it works, though I got one TIMEOUT - WRITE_DMA with it. I just used a stripped down GENERIC kernel with hw.apic.mixed_mode=3D1 set in /boot/loader.conf, which has the same effect as above. > - build an unmodified GENERIC (*with* NO_MIXED_MODE) from the same > sources and boot it *with apic enabled* >=20 Booted the same kernel with hw.apic.mixed_mode=3D0. It stalls (see the attached logs). > Please provide verbose dmesg for both cases, as well as the contents > of /boot/loader.conf and /boot/device.hints. >=20 /boot/loader.conf has some uninteresting stuff to load network and sound modules I need, and device.hints equals GENERIC.hints. Cheers, --=20 Ruslan Ermilov ru@FreeBSD.org FreeBSD committer --8t9RHnE3ZwKMSgU+ Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot.mixed_mode" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #3: Fri Mar 25 10:44:58 EET 2005 ru@hammer.runet:/usr/obj/usr/src/sys/HAMMER WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8068b000. Preloaded elf obj module "/boot/kernel/if_em.ko" at 0xffffffff8068b1d0. Preloaded elf obj module "/boot/kernel/if_xl.ko" at 0xffffffff8068b6f8. Preloaded elf obj module "/boot/kernel/miibus.ko" at 0xffffffff8068bc20. Preloaded elf obj module "/boot/kernel/snd_ich.ko" at 0xffffffff8068c148. Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff8068c6b0. ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193171 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1470007451 Hz CPU: AMD Opteron(tm) Processor 240 (1470.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf51 Stepping = 1 Features=0x78bfbff AMD Features=0xe0500800 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 1073479680 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000789000 - 0x000000003e189fff, 1033900032 bytes (252417 pages) avail memory = 1028120576 (980 MB) APIC: CPU 0 has ACPI ID 1 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high MADT: Interrupt override: source 14, irq 14 ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: high MADT: Interrupt override: source 15, irq 15 ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010000 random: io: mem: null: acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80015004 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00d110de) AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi0: Power Button (fixed) ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci_link0: irq 0 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link1: irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 20 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link2: irq 5 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 21 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link3: irq 0 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link4: irq 5 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 20 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link5: irq 10 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 20 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link6: irq 11 on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 16 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 16 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 16 pci_link7: irq 0 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=0x10de, dev=0x00d1, revid=0xa4 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00d0, revid=0xf6 bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00005000, size 6, enabled map[24]: type 4, range 32, base 00005040, size 6, enabled found-> vendor=0x10de, dev=0x00d4, revid=0xa4 bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base febfd000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LUS0:0) pci_link1: Picked IRQ 20 with weight 0 ioapic0: Changing polarity for pin 20 to high pcib0: slot 2 INTA routed to irq 20 via \\_SB_.LUS0 found-> vendor=0x10de, dev=0x00d7, revid=0xa5 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base febfe000, size 12, enabled pcib0: matched entry for 0.2.INTB (src \\_SB_.LUS1:0) pci_link4: Picked IRQ 20 with weight 1 pcib0: slot 2 INTB routed to irq 20 via \\_SB_.LUS1 found-> vendor=0x10de, dev=0x00d7, revid=0xa5 bus=0, slot=2, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base febffc00, size 8, enabled pcib0: matched entry for 0.2.INTC (src \\_SB_.LUS2:0) pci_link5: Picked IRQ 20 with weight 2 pcib0: slot 2 INTC routed to irq 20 via \\_SB_.LUS2 found-> vendor=0x10de, dev=0x00d8, revid=0xa2 bus=0, slot=2, func=2 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=c, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 4, range 32, base 0000ec00, size 7, enabled map[18]: type 1, range 32, base febfb000, size 12, enabled pcib0: matched entry for 0.6.INTA (src \\_SB_.LAUI:0) pci_link2: Picked IRQ 21 with weight 0 ioapic0: Changing polarity for pin 21 to high pcib0: slot 6 INTA routed to irq 21 via \\_SB_.LAUI found-> vendor=0x10de, dev=0x00da, revid=0xa2 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x10de, dev=0x00d5, revid=0xa5 bus=0, slot=8, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x10de, dev=0x00dd, revid=0xa2 bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00d2, revid=0xa4 bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) isab0: at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) pci0:1:1: Transition from D0 to D3 ohci0: mem 0xfebfd000-0xfebfdfff irq 20 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebfd000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xfebfe000-0xfebfefff irq 20 at device 2.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebfe000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: mem 0xfebffc00-0xfebffcff irq 20 at device 2.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfebffc00 ehci0: [GIANT-LOCKED] usb2: waiting for BIOS to give up control usb2: timed out waiting for BIOS usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered pcm0: port 0xe800-0xe8ff,0xec00-0xec7f mem 0xfebfb000-0xfebfbfff irq 21 at device 6.0 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800 pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0xec00 pcm0: [GIANT-LOCKED] pcm0: pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4 pcm0: sndbuf_setmap 3db86000, 4000; 0xffffffffa5446000 -> 3db86000 pcm0: sndbuf_setmap 3db78000, 4000; 0xffffffffa544a000 -> 3db78000 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 8.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=50 ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=ff stat1=10 devices=0x8 ata1: [MPSAFE] pcib1: at device 10.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xdfff pcib1: memory decode 0xfc800000-0xfc9fffff pcib1: prefetched decode 0xfff00000-0xfffff pci_link8: irq 11 on acpi0 pci_link8: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 17 pci_link8: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 17 pci_link8: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 17 pci_link9: irq 0 on acpi0 pci_link9: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 18 pci_link9: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 18 pci_link9: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 18 pci_link10: irq 10 on acpi0 pci_link10: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 19 pci_link10: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 19 pci_link10: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 19 pci_link11: irq 0 on acpi0 pci_link11: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 17 pci_link11: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 17 pci_link11: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 17 ACPI: Found matching pin for 0.6.INTA at func 0: 21 pci_link11: BIOS IRQ 21 for 0.6.INTA is invalid pci1: on pcib1 pci1: physical bus=1 map[10]: type 4, range 32, base 0000dc00, size 7, enabled pcib1: (null) requested I/O range 0xdc00-0xdc7f: in range map[14]: type 1, range 32, base fc9ffc00, size 7, enabled pcib1: (null) requested memory range 0xfc9ffc00-0xfc9ffc7f: good pcib1: matched entry for 1.5.INTA (src \\_SB_.LNKC:0) pci_link10: Picked IRQ 19 with weight 0 ioapic0: Changing polarity for pin 19 to high pcib1: slot 5 INTA routed to irq 19 via \\_SB_.LNKC found-> vendor=0x10b7, dev=0x9200, revid=0x74 bus=1, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=19 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc9a0000, size 17, enabled pcib1: (null) requested memory range 0xfc9a0000-0xfc9bffff: good map[14]: type 1, range 32, base fc980000, size 17, enabled pcib1: (null) requested memory range 0xfc980000-0xfc99ffff: good map[18]: type 4, range 32, base 0000d800, size 6, enabled pcib1: (null) requested I/O range 0xd800-0xd83f: in range pcib1: matched entry for 1.7.INTA (src \\_SB_.LNKA:0) pci_link8: Picked IRQ 17 with weight 0 ioapic0: Changing polarity for pin 17 to high pcib1: slot 7 INTA routed to irq 17 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x1076, revid=0x00 bus=1, slot=7, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 4, range 32, base 0000d400, size 6, enabled pcib1: (null) requested I/O range 0xd400-0xd43f: in range map[14]: type 4, range 32, base 0000d000, size 4, enabled pcib1: (null) requested I/O range 0xd000-0xd00f: in range map[18]: type 4, range 32, base 0000cc00, size 7, enabled pcib1: (null) requested I/O range 0xcc00-0xcc7f: in range map[1c]: type 1, range 32, base fc9fe000, size 12, enabled pcib1: (null) requested memory range 0xfc9fe000-0xfc9fefff: good map[20]: type 1, range 32, base fc940000, size 17, enabled pcib1: (null) requested memory range 0xfc940000-0xfc95ffff: good pcib1: matched entry for 1.8.INTA (src \\_SB_.LNKC:0) pcib1: slot 8 INTA routed to irq 19 via \\_SB_.LNKC found-> vendor=0x105a, dev=0x3373, revid=0x02 bus=1, slot=8, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=145 (dwords) lattimer=0x60 (2880 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=19 powerspec 2 supports D0 D1 D3 current D0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfc9ffc00-0xfc9ffc7f irq 19 at device 5.0 on pci1 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xfc9ffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:50:da:42:6e:8e xl0: [MPSAFE] em0: port 0xd800-0xd83f mem 0xfc9a0000-0xfc9bffff,0xfc980000-0xfc99ffff irq 17 at device 7.0 on pci1 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc9a0000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xd800 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:0e:0c:37:c2:82 em0: Speed:N/A Duplex:N/A atapci1: port 0xd400-0xd43f,0xd000-0xd00f,0xcc00-0xcc7f mem 0xfc9fe000-0xfc9fefff,0xfc940000-0xfc95ffff irq 19 at device 8.0 on pci1 atapci1: failed: rid 0x20 is memory, requested 4 atapci1: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xfc940000 atapci1: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xfc9fe000 atapci1: [MPSAFE] ata2: channel #0 on atapci1 ata2: reset tp1 mask=01 ostat0=7f ostat1=7f ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=ff stat1=00 devices=0x0 ata2: [MPSAFE] ata3: channel #1 on atapci1 ata3: reset tp1 mask=01 ostat0=7f ostat1=7f ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=ff stat1=00 devices=0x0 ata3: [MPSAFE] ata4: channel #2 on atapci1 ata4: reset tp1 mask=03 ostat0=50 ostat1=00 ata4-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata4-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata4-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=50 stat1=00 devices=0x1 ata4: [MPSAFE] pcib2: at device 11.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfca00000-0xfeafffff pcib2: prefetched decode 0xe4700000-0xec6fffff pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND pci2: on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib2: (null) requested memory range 0xfd000000-0xfdffffff: good map[14]: type 3, range 32, base e8000000, size 26, enabled pcib2: (null) requested memory range 0xe8000000-0xebffffff: good pcib0: matched entry for 0.11.INTA (src \\_SB_.LNKE:0) pci_link6: Picked IRQ 16 with weight 0 ioapic0: Changing polarity for pin 16 to high pcib0: slot 11 INTA routed to irq 16 via \\_SB_.LNKE pcib2: slot 0 INTA is routed to irq 16 found-> vendor=0x10de, dev=0x0181, revid=0xc1 bus=2, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 pci2: at device 0.0 (no driver attached) acpi_button0: on acpi0 pci_link12: irq 0 on acpi0 pci_link12: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link12: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link12: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link13: irq 14 on acpi0 pci_link13: Links after initial probe: Index IRQ Rtd Ref IRQs 0 14 N 0 22 pci_link13: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link13: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 22 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 sio0: irq maps: 0xc21 0xc31 0xc21 0xc21 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0xc21 0xc29 0xc21 0xc21 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff,0xd0000-0xd0fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) ppc0 failed to probe at irq 7 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 1470007451 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on nVidia nForce3 chip ata0-master: setting UDMA100 on nVidia nForce3 chip ad0: ATA-6 disk at ata0-master ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ata1-slave: pio=0x0c wdma=0x22 udma=0x44 cable=40pin ata1-slave: setting PIO4 on nVidia nForce3 chip ata1-slave: DMA limited to UDMA33, non-ATA66 cable or device ata1-slave: setting UDMA33 on nVidia nForce3 chip acd0: CDRW drive at ata1 as slave acd0: read 345KB/s (8251KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata4-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad8: ATA-6 disk at ata4-master ad8: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad8: 16 secs/int, 1 depth queue, UDMA100 pcm0: measured ac97 link rate at 47996 Hz, will use 48000 Hz ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 GEOM: new disk ad0 GEOM: new disk ad8 Trying to mount root from ufs:/dev/ad0a start_init: trying /sbin/init ipfw2 initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled WARNING: attempt to net_add_domain(netgraph) after domainfinalize() em0: Link is up 100 Mbps Full Duplex --8t9RHnE3ZwKMSgU+ Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot.no_mixed_mode" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #3: Fri Mar 25 10:44:58 EET 2005 ru@hammer.runet:/usr/obj/usr/src/sys/HAMMER WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8068b000. Preloaded elf obj module "/boot/kernel/if_em.ko" at 0xffffffff8068b1d0. Preloaded elf obj module "/boot/kernel/if_xl.ko" at 0xffffffff8068b6f8. Preloaded elf obj module "/boot/kernel/miibus.ko" at 0xffffffff8068bc20. Preloaded elf obj module "/boot/kernel/snd_ich.ko" at 0xffffffff8068c148. Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff8068c6b0. ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193169 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1470007358 Hz CPU: AMD Opteron(tm) Processor 240 (1470.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf51 Stepping = 1 Features=0x78bfbff AMD Features=0xe0500800 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 1073479680 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000789000 - 0x000000003e189fff, 1033900032 bytes (252417 pages) avail memory = 1028120576 (980 MB) APIC: CPU 0 has ACPI ID 1 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high MADT: Interrupt override: source 14, irq 14 ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: high MADT: Interrupt override: source 15, irq 15 ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010000 random: io: mem: null: acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80015004 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00d110de) AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi0: Power Button (fixed) ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci_link0: irq 0 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link1: irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 20 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link2: irq 5 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 21 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link3: irq 0 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link4: irq 5 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 20 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link5: irq 10 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 20 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 pci_link6: irq 11 on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 16 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 16 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 16 pci_link7: irq 0 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 21 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=0x10de, dev=0x00d1, revid=0xa4 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00d0, revid=0xf6 bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00005000, size 6, enabled map[24]: type 4, range 32, base 00005040, size 6, enabled found-> vendor=0x10de, dev=0x00d4, revid=0xa4 bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base febfd000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LUS0:0) pci_link1: Picked IRQ 20 with weight 0 ioapic0: Changing polarity for pin 20 to high pcib0: slot 2 INTA routed to irq 20 via \\_SB_.LUS0 found-> vendor=0x10de, dev=0x00d7, revid=0xa5 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base febfe000, size 12, enabled pcib0: matched entry for 0.2.INTB (src \\_SB_.LUS1:0) pci_link4: Picked IRQ 20 with weight 1 pcib0: slot 2 INTB routed to irq 20 via \\_SB_.LUS1 found-> vendor=0x10de, dev=0x00d7, revid=0xa5 bus=0, slot=2, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base febffc00, size 8, enabled pcib0: matched entry for 0.2.INTC (src \\_SB_.LUS2:0) pci_link5: Picked IRQ 20 with weight 2 pcib0: slot 2 INTC routed to irq 20 via \\_SB_.LUS2 found-> vendor=0x10de, dev=0x00d8, revid=0xa2 bus=0, slot=2, func=2 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=c, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 4, range 32, base 0000ec00, size 7, enabled map[18]: type 1, range 32, base febfb000, size 12, enabled pcib0: matched entry for 0.6.INTA (src \\_SB_.LAUI:0) pci_link2: Picked IRQ 21 with weight 0 ioapic0: Changing polarity for pin 21 to high pcib0: slot 6 INTA routed to irq 21 via \\_SB_.LAUI found-> vendor=0x10de, dev=0x00da, revid=0xa2 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x10de, dev=0x00d5, revid=0xa5 bus=0, slot=8, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x10de, dev=0x00dd, revid=0xa2 bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00d2, revid=0xa4 bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) isab0: at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) pci0:1:1: Transition from D0 to D3 ohci0: mem 0xfebfd000-0xfebfdfff irq 20 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebfd000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xfebfe000-0xfebfefff irq 20 at device 2.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebfe000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: mem 0xfebffc00-0xfebffcff irq 20 at device 2.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfebffc00 ehci0: [GIANT-LOCKED] usb2: waiting for BIOS to give up control usb2: timed out waiting for BIOS usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered pcm0: port 0xe800-0xe8ff,0xec00-0xec7f mem 0xfebfb000-0xfebfbfff irq 21 at device 6.0 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800 pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0xec00 pcm0: [GIANT-LOCKED] pcm0: pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4 pcm0: sndbuf_setmap 3db86000, 4000; 0xffffffffa5446000 -> 3db86000 pcm0: sndbuf_setmap 3db78000, 4000; 0xffffffffa544a000 -> 3db78000 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 8.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=50 ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=ff stat1=10 devices=0x8 ata1: [MPSAFE] pcib1: at device 10.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xdfff pcib1: memory decode 0xfc800000-0xfc9fffff pcib1: prefetched decode 0xfff00000-0xfffff pci_link8: irq 11 on acpi0 pci_link8: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 17 pci_link8: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 17 pci_link8: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 17 pci_link9: irq 0 on acpi0 pci_link9: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 18 pci_link9: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 18 pci_link9: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 18 pci_link10: irq 10 on acpi0 pci_link10: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 19 pci_link10: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 19 pci_link10: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 19 pci_link11: irq 0 on acpi0 pci_link11: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 17 pci_link11: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 17 pci_link11: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 17 ACPI: Found matching pin for 0.6.INTA at func 0: 21 pci_link11: BIOS IRQ 21 for 0.6.INTA is invalid pci1: on pcib1 pci1: physical bus=1 map[10]: type 4, range 32, base 0000dc00, size 7, enabled pcib1: (null) requested I/O range 0xdc00-0xdc7f: in range map[14]: type 1, range 32, base fc9ffc00, size 7, enabled pcib1: (null) requested memory range 0xfc9ffc00-0xfc9ffc7f: good pcib1: matched entry for 1.5.INTA (src \\_SB_.LNKC:0) pci_link10: Picked IRQ 19 with weight 0 ioapic0: Changing polarity for pin 19 to high pcib1: slot 5 INTA routed to irq 19 via \\_SB_.LNKC found-> vendor=0x10b7, dev=0x9200, revid=0x74 bus=1, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=19 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc9a0000, size 17, enabled pcib1: (null) requested memory range 0xfc9a0000-0xfc9bffff: good map[14]: type 1, range 32, base fc980000, size 17, enabled pcib1: (null) requested memory range 0xfc980000-0xfc99ffff: good map[18]: type 4, range 32, base 0000d800, size 6, enabled pcib1: (null) requested I/O range 0xd800-0xd83f: in range pcib1: matched entry for 1.7.INTA (src \\_SB_.LNKA:0) pci_link8: Picked IRQ 17 with weight 0 ioapic0: Changing polarity for pin 17 to high pcib1: slot 7 INTA routed to irq 17 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x1076, revid=0x00 bus=1, slot=7, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 4, range 32, base 0000d400, size 6, enabled pcib1: (null) requested I/O range 0xd400-0xd43f: in range map[14]: type 4, range 32, base 0000d000, size 4, enabled pcib1: (null) requested I/O range 0xd000-0xd00f: in range map[18]: type 4, range 32, base 0000cc00, size 7, enabled pcib1: (null) requested I/O range 0xcc00-0xcc7f: in range map[1c]: type 1, range 32, base fc9fe000, size 12, enabled pcib1: (null) requested memory range 0xfc9fe000-0xfc9fefff: good map[20]: type 1, range 32, base fc940000, size 17, enabled pcib1: (null) requested memory range 0xfc940000-0xfc95ffff: good pcib1: matched entry for 1.8.INTA (src \\_SB_.LNKC:0) pcib1: slot 8 INTA routed to irq 19 via \\_SB_.LNKC found-> vendor=0x105a, dev=0x3373, revid=0x02 bus=1, slot=8, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=145 (dwords) lattimer=0x60 (2880 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=19 powerspec 2 supports D0 D1 D3 current D0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfc9ffc00-0xfc9ffc7f irq 19 at device 5.0 on pci1 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xfc9ffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:50:da:42:6e:8e xl0: [MPSAFE] em0: port 0xd800-0xd83f mem 0xfc9a0000-0xfc9bffff,0xfc980000-0xfc99ffff irq 17 at device 7.0 on pci1 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc9a0000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xd800 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:0e:0c:37:c2:82 em0: Speed:N/A Duplex:N/A atapci1: port 0xd400-0xd43f,0xd000-0xd00f,0xcc00-0xcc7f mem 0xfc9fe000-0xfc9fefff,0xfc940000-0xfc95ffff irq 19 at device 8.0 on pci1 atapci1: failed: rid 0x20 is memory, requested 4 atapci1: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xfc940000 atapci1: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xfc9fe000 atapci1: [MPSAFE] ata2: channel #0 on atapci1 ata2: reset tp1 mask=01 ostat0=7f ostat1=7f ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=ff stat1=00 devices=0x0 ata2: [MPSAFE] ata3: channel #1 on atapci1 ata3: reset tp1 mask=01 ostat0=7f ostat1=7f ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=ff stat1=00 devices=0x0 ata3: [MPSAFE] ata4: channel #2 on atapci1 ata4: reset tp1 mask=03 ostat0=50 ostat1=00 ata4-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata4-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata4-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=50 stat1=00 devices=0x1 ata4: [MPSAFE] pcib2: at device 11.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfca00000-0xfeafffff pcib2: prefetched decode 0xe4700000-0xec6fffff pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND pci2: on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib2: (null) requested memory range 0xfd000000-0xfdffffff: good map[14]: type 3, range 32, base e8000000, size 26, enabled pcib2: (null) requested memory range 0xe8000000-0xebffffff: good pcib0: matched entry for 0.11.INTA (src \\_SB_.LNKE:0) pci_link6: Picked IRQ 16 with weight 0 ioapic0: Changing polarity for pin 16 to high pcib0: slot 11 INTA routed to irq 16 via \\_SB_.LNKE pcib2: slot 0 INTA is routed to irq 16 found-> vendor=0x10de, dev=0x0181, revid=0xc1 bus=2, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 pci2: at device 0.0 (no driver attached) acpi_button0: on acpi0 pci_link12: irq 0 on acpi0 pci_link12: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link12: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link12: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link13: irq 14 on acpi0 pci_link13: Links after initial probe: Index IRQ Rtd Ref IRQs 0 14 N 0 22 pci_link13: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 22 pci_link13: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 22 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 sio0: irq maps: 0xc21 0xc31 0xc21 0xc21 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0xc21 0xc29 0xc21 0xc21 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff,0xd0000-0xd0fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) ppc0 failed to probe at irq 7 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 1470007358 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on nVidia nForce3 chip ata0-master: setting UDMA100 on nVidia nForce3 chip ad0: ATA-6 disk at ata0-master ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ata1-slave: pio=0x0c wdma=0x22 udma=0x44 cable=40pin ata1-slave: setting PIO4 on nVidia nForce3 chip ata1-slave: DMA limited to UDMA33, non-ATA66 cable or device ata1-slave: setting UDMA33 on nVidia nForce3 chip acd0: CDRW drive at ata1 as slave acd0: read 345KB/s (8251KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata4-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad8: ATA-6 disk at ata4-master ad8: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad8: 16 secs/int, 1 depth queue, UDMA100 pcm0: measured ac97 link rate at 17112 Hz ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 2 (ISA IRQ 0) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 --8t9RHnE3ZwKMSgU+-- --yNb1oOkm5a9FJOVX Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (FreeBSD) iD8DBQFCQ93qqRfpzJluFF4RArvZAJ0XF3nk3ix1SJMe4BolZ8AdvC/KIgCeJpgY VIvb/+emJM0ihcBsLuFOLKM= =P3eJ -----END PGP SIGNATURE----- --yNb1oOkm5a9FJOVX--