Date: Wed, 11 Nov 2020 20:44:55 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 251018] sdhc errors on growfs with RPI3 Message-ID: <bug-251018-227-R157jqObHg@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-251018-227@https.bugs.freebsd.org/bugzilla/> References: <bug-251018-227@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D251018 --- Comment #1 from Steve Wills <swills@FreeBSD.org> --- For the record, here's the full boot log: Consoles: EFI console=20=20 Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p1: FreeBSD/arm64 EFI loader, Revision 1.1 (Thu Nov 5 07:53:09 UTC 2020 root@releng1.nyi.freebsd.org) Command line arguments: loader.efi Image base: 0x39e17000 EFI version: 2.80 EFI Firmware: Das U-Boot (rev 8224.1792) Console: comconsole (0) Load Path: /efi\boot\bootaa64.efi Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x81f,= 0x18fa8) Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x81f,= 0x18fa8) Setting currdev to disk0p1: Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x197c= 7,0x5e6821) Setting currdev to disk0p2: Loading /boot/defaults/loader.conf Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local Loading kernel... /boot/kernel/kernel text=3D0x2a8 text=3D0x87ade8 text=3D0x1efa4c data=3D0x1= 93940 data=3D0x0+0x541146 syms=3D[0x8+0x116598+0x8+0x13b120] Loading configured modules... /boot/kernel/umodem.ko text=3D0x2120 text=3D0x1390 data=3D0x6e0+0x10 syms=3D[0x8+0xf48+0x8+0xb6e] loading required module 'ucom' /boot/kernel/ucom.ko text=3D0x21a0 text=3D0x2e20 data=3D0x880+0x858 syms=3D[0x8+0x11a0+0x8+0xb2c] can't find '/etc/hostid' can't find '/boot/entropy' Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]...=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20 Using DTB provided by EFI at 0x7ef6000. EFI framebuffer information: addr, size 0x3eaf0000, 0x10a800 dimensions 656 x 416 stride 656 masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 ---<<BOOT>>--- KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT #0 ef87bd449eb-c254225(main): Thu Nov 5 08:56:01 UTC = 2020 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673) WARNING: WITNESS option enabled, expect reduced performance. VT(efifb): resolution 656x416 module firmware already present! real memory =3D 993849344 (947 MB) avail memory =3D 943214592 (899 MB) Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs arc4random: WARNING: initial seeding bypassed the cryptographic random devi= ce because it was not yet seeded and the knob 'bypass_before_seeding' was enab= led. random: entropy device external interface MAP 39f3f000 mode 2 pages 1 MAP 39f45000 mode 2 pages 2 MAP 3b350000 mode 2 pages 16 MAP 3f100000 mode 0 pages 1 WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.= 0. kbd0 at kbdmux0 WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simpleb= us0 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 48 on simplebus0 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 24,25 on simplebus0 gpiobus0: <OFW GPIO bus> on gpio0 mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 23 on simplebus0 bcm2835_firmware0: <BCM2835 Firmware> on simplebus0 gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0 gpiobus1: <GPIO bus> on gpio1 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21 on simplebus0 bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00= a023 on simplebus0 bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0 bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 22 on simpleb= us0 gpioc0: <GPIO controller> on gpio0 uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 26 on simpleb= us0 uart0: console (115200,n,8,1) spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 28 on simplebus0 spibus0: <OFW SPI bus> on spi0 spibus0: <unknown card> at cs 0 mode 0 spibus0: <unknown card> at cs 1 mode 0 iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 40 on simplebus0 bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 46,47 on simplebus0 usbus1 on bcm283x_dwcotg0 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq = 50 on simplebus0 mmc0: <MMC/SD bus> on sdhci_bcm0 gpioc1: <GPIO controller> on gpio1 fb0: <BCM2835 VT framebuffer driver> on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0. VT: Replacing driver "efifb" with new "fb". fb0: 656x416(656x416@0,0) 32bpp fb0: fbswap: 1, pitch 2624, base 0x3eaf0000, screen_size 1091584 pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 gpioled0: <GPIO LEDs> on ofwbus0 gpioled0: <led0> failed to map pin lock order reversal: (sleepable after non-sleepable) 1st 0xffff000000c14ad8 LED mtx (LED mtx, sleep mutex) @ /usr/src/sys/dev/led/led.c:298 2nd 0xffffa00000849810 Raspberry Pi firmware gpio (Raspberry Pi firmware g= pio, sx) @ /usr/src/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:252 lock order LED mtx -> Raspberry Pi firmware gpio attempted at: #0 0xffff000000568374 at witness_checkorder+0xc54 #1 0xffff000000505c84 at _sx_xlock+0x7c #2 0xffff0000007dd6a4 at rpi_fw_gpio_pin_set+0xe8 #3 0xffff000000295afc at led_create_state+0x158 #4 0xffff000000267448 at gpioled_attach+0x290 #5 0xffff0000005345cc at device_attach+0x400 #6 0xffff000000534134 at device_probe_and_attach+0x7c #7 0xffff00000053631c at bus_generic_new_pass+0xf8 #8 0xffff0000005362cc at bus_generic_new_pass+0xa8 #9 0xffff0000005362cc at bus_generic_new_pass+0xa8 #10 0xffff0000005316b0 at bus_set_pass+0x4c #11 0xffff00000048c57c at mi_startup+0x12c uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks h= eld: exclusive sleep mutex LED mtx (LED mtx) r =3D 0 (0xffff000000c14ad8) locked= @ /usr/src/sys/dev/led/led.c:298 stack backtrace: #0 0xffff000000568694 at witness_debugger+0x64 #1 0xffff000000569824 at witness_warn+0x3ec #2 0xffff000000772194 at uma_zalloc_debug+0x2c #3 0xffff000000771bf8 at uma_zalloc_arg+0x2c #4 0xffff0000004d1848 at malloc+0xf0 #5 0xffff0000007d2864 at bcm2835_firmware_property+0x44 #6 0xffff0000007dd6bc at rpi_fw_gpio_pin_set+0x100 #7 0xffff000000295afc at led_create_state+0x158 #8 0xffff000000267448 at gpioled_attach+0x290 #9 0xffff0000005345cc at device_attach+0x400 #10 0xffff000000534134 at device_probe_and_attach+0x7c #11 0xffff00000053631c at bus_generic_new_pass+0xf8 #12 0xffff0000005362cc at bus_generic_new_pass+0xa8 #13 0xffff0000005362cc at bus_generic_new_pass+0xa8 #14 0xffff0000005316b0 at bus_set_pass+0x4c #15 0xffff00000048c57c at mi_startup+0x12c uma_zalloc_debug: zone "malloc-16" with the following non-sleepable locks h= eld: exclusive sleep mutex LED mtx (LED mtx) r =3D 0 (0xffff000000c14ad8) locked= @ /usr/src/sys/dev/led/led.c:298 stack backtrace: #0 0xffff000000568694 at witness_debugger+0x64 #1 0xffff000000569824 at witness_warn+0x3ec #2 0xffff000000772194 at uma_zalloc_debug+0x2c #3 0xffff000000771bf8 at uma_zalloc_arg+0x2c #4 0xffff0000004d1848 at malloc+0xf0 #5 0xffff0000007ea740 at bounce_bus_dmamem_alloc+0x50 #6 0xffff0000007d533c at bcm2835_mbox_property+0xdc #7 0xffff0000007d2898 at bcm2835_firmware_property+0x78 #8 0xffff0000007dd6bc at rpi_fw_gpio_pin_set+0x100 #9 0xffff000000295afc at led_create_state+0x158 #10 0xffff000000267448 at gpioled_attach+0x290 #11 0xffff0000005345cc at device_attach+0x400 #12 0xffff000000534134 at device_probe_and_attach+0x7c #13 0xffff00000053631c at bus_generic_new_pass+0xf8 #14 0xffff0000005362cc at bus_generic_new_pass+0xa8 #15 0xffff0000005362cc at bus_generic_new_pass+0xa8 #16 0xffff0000005316b0 at bus_set_pass+0x4c #17 0xffff00000048c57c at mi_startup+0x12c uma_zalloc_debug: zone "malloc-128" with the following non-sleepable locks held: exclusive sleep mutex LED mtx (LED mtx) r =3D 0 (0xffff000000c14ad8) locked= @ /usr/src/sys/dev/led/led.c:298 stack backtrace: #0 0xffff000000568694 at witness_debugger+0x64 #1 0xffff000000569824 at witness_warn+0x3ec #2 0xffff000000772194 at uma_zalloc_debug+0x2c #3 0xffff000000771bf8 at uma_zalloc_arg+0x2c #4 0xffff0000004d1848 at malloc+0xf0 #5 0xffff0000007ea788 at bounce_bus_dmamem_alloc+0x98 #6 0xffff0000007d533c at bcm2835_mbox_property+0xdc #7 0xffff0000007d2898 at bcm2835_firmware_property+0x78 #8 0xffff0000007dd6bc at rpi_fw_gpio_pin_set+0x100 #9 0xffff000000295afc at led_create_state+0x158 #10 0xffff000000267448 at gpioled_attach+0x290 #11 0xffff0000005345cc at device_attach+0x400 #12 0xffff000000534134 at device_probe_and_attach+0x7c #13 0xffff00000053631c at bus_generic_new_pass+0xf8 #14 0xffff0000005362cc at bus_generic_new_pass+0xa8 #15 0xffff0000005362cc at bus_generic_new_pass+0xa8 #16 0xffff0000005316b0 at bus_set_pass+0x4c #17 0xffff00000048c57c at mi_startup+0x12c uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks h= eld: exclusive sleep mutex LED mtx (LED mtx) r =3D 0 (0xffff000000c14ad8) locked= @ /usr/src/sys/dev/led/led.c:298 stack backtrace: #0 0xffff000000568694 at witness_debugger+0x64 #1 0xffff000000569824 at witness_warn+0x3ec #2 0xffff000000772194 at uma_zalloc_debug+0x2c #3 0xffff000000771bf8 at uma_zalloc_arg+0x2c #4 0xffff0000004d1848 at malloc+0xf0 #5 0xffff0000007ea8d8 at bounce_bus_dmamem_alloc+0x1e8 #6 0xffff0000007d533c at bcm2835_mbox_property+0xdc #7 0xffff0000007d2898 at bcm2835_firmware_property+0x78 #8 0xffff0000007dd6bc at rpi_fw_gpio_pin_set+0x100 #9 0xffff000000295afc at led_create_state+0x158 #10 0xffff000000267448 at gpioled_attach+0x290 #11 0xffff0000005345cc at device_attach+0x400 #12 0xffff000000534134 at device_probe_and_attach+0x7c #13 0xffff00000053631c at bus_generic_new_pass+0xf8 #14 0xffff0000005362cc at bus_generic_new_pass+0xa8 #15 0xffff0000005362cc at bus_generic_new_pass+0xa8 #16 0xffff0000005316b0 at bus_set_pass+0x4c #17 0xffff00000048c57c at mi_startup+0x12c cryptosoft0: <software crypto> Timecounters tick every 1.000 msec usbus1: 480Mbps High Speed USB v2.0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 ugen1.1: <DWCOTG OTG Root HUB> at usbus1 uhub0 on usbus1 uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 mmcsd0: 32GB <SDHC SD32G 8.5 SN F1970496 MFG 09/2020 by 3 SD> at mmc0 50.0MHz/4bit/65535-block bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF Release APs...done CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Cache Type =3D <64 byte D-cacheline,64 byte I-cacheline,= VIPT ICache,64 byte ERG,64 byte CWG> Trying to mount root from ufs:/dev/ufs/rootfs [rw]... Instruction Set Attributes 0 =3D <CRC32> Instruction Set Attributes 1 =3D <> Processor Features 0 =3D <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> Processor Features 1 =3D <> Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,= 1TB PA> Memory Model Features 1 =3D <8bit VMID> Memory Model Features 2 =3D <32bit CCIDX,48bit VA> Debug Features 0 =3D <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> Debug Features 1 =3D <> Auxiliary Features 0 =3D <> Auxiliary Features 1 =3D <> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 WARNING: WITNESS option enabled, expect reduced performance. Warning: no time-of-day clock registered, system time will not be set accurately Dual Console: Serial Primary, Video Secondary uhub0: 1 port with 1 removable, self powered Growing root partition to fill device random: randomdev_wait_until_seeded unblock wait ugen1.2: <vendor 0x0424 product 0x9514> at usbus1 uhub1 on uhub0 uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus1 uhub1: MTT enabled uhub1: 5 ports with 4 removable, self powered random: unblocking device. GEOM_PART: mmcsd0s2 was automatically resized. Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them. mmcsd0s2 resized mmcsd0s2a resized gpart: arg0 'ufs/rootfs': Invalid argument mmcsd0: Error indicated: 6 NO MEMORY grordfs: read emmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout rror: 5129216: Operation not supported sdhci_bcm0-slot0: Got data interrupt 0x00600000, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000010 sdhci_bcm0-slot0: Argument: 0x000197d7 | Trn mode: 0x00000036 sdhci_bcm0-slot0: Present: 0x010f0000 | Host ctl: 0x00000003 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 ugen1.3: <vendor 0x0424 product 0xec00> at usbus1 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 smsc0 on uhub1 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus1 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Got data interrupt 0x00600000, but there is no active command. smsc0: chip 0xec00, rev. 0002 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000010 sdhci_bcm0-slot0: Argument: 0x000197c7 | Trn mode: 0x00000036 miibus0: <MII bus>sdhci_bcm0-slot0: Present: 0x010f0000 | Host ctl: 0x0000= 0002 on smsc0 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 smscphy0: <SMC LAN8700 10/100 interface>sdhci_bcm0-slot0: Wake-up: 0x00000= 000 | Clock: 0x00000207 PHY 1sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 on miibus0 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb smscphy0: sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 10baseTsdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 , 10baseT-FDXsdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 , 100baseTXsdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 , 100baseTX-FDXsdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D , autosdhci_bcm0-slot0: Got data interrupt 0x00600000, but there is no acti= ve command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ue0: <USB Ethernet> on smsc0 sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 ue0: Ethernet address: b8:27:eb:e7:f1:dc sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000010 sdhci_bcm0-slot0: Argument: 0x000199c7 | Trn mode: 0x00000036 sdhci_bcm0-slot0: Present: 0x010f0000 | Host ctl: 0x00000003 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Got data interrupt 0x00600000, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0x03b71ffe | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x010f0000 | Host ctl: 0x00000003 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D No suitable dump device was found. eval: /sbin/md5: Input/output error Setting hostuuid: 30303030-3030-3030-3930-653766316463. Setting hostid: 0x. sysctl: invalid unsigned long '0x' eval: /sbin/swapon: Input/output error Starting file system chesdhci_bcm0-slot0: Got data interrupt 0x00600000, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000028 sdhci_bcm0-slot0: Argument: 0x004b6400 | Trn mode: 0x00000036 sdhci_bcm0-slot0: Present: 0x010f0000 | Host ctl: 0x00000003 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D cks: eval: fsck: Input/output error Unknown error 126; help! ERROR: ABORTING BOOT (sending SIGTERM to parent)! sdhci_bcm0-slot0: Got data interrupt 0x00600000, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000040 sdhci_bcm0-slot0: Argument: 0x00019980 | Trn mode: 0x00000036 sdhci_bcm0-slot0: Present: 0x010f0000 | Host ctl: 0x00000002 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: 94ADMA addr:0x00000000 | Slot int: 0x00000000 ugen1.4: <Realtek 802.11n WLAN Adapter> at usbus1 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D nit 1 - - /bin/sh on /etc/rc terminated abnormally, going to single user mo= de sdhci_bcm0-slot0: Got data interrupt 0x00600000, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000008 sdhci_bcm0-slot0: Argument: 0x005f8218 | Trn mode: 0x00000036 sdhci_bcm0-slot0: Present: 0x010f0000 | Host ctl: 0x00000003 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D inpx scanner failed Growing root partition to fill device mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout gpart: Operation not supported gpart: Operation not supported gpart: arg0 'ufs/rootfs': Invalid argument growfs: unable to read superblock: Input/output error No suitable dump device was found. eval: /sbin/md5: Input/output error Setting hostuuid: 30303030-3030-3030-3930-653766316463. Setting hostid: 0x. ugen1.5: <Logitech USB Receiver> at usbus1 ukbd0 on uhub1 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 5> on usbus1 invalid unsigned long '0x' kbd1 at ukbd0 eval: /swapon: Input/output error Fast boot: skipping disk checks. mount: /dev/ufs/rootfs: Operation not supported Mounting root filesystem rw failed, startup aborted ERROR: ABORTING BOOT (sending SIGTERM to parent)! 2020-11-05T10:05:22.765870+00:00 - init 1 - - /bin/sh on /etc/rc terminated abnormally, going to single user mode input in flex scanner failed Growing root partition to fill device gpart: Operation not supported gpart: Operation not supported gpart: arg0 'ufs/rootfs': Invalid argument growfs: unable to read superblock: Input/output error No suitable dump device was found. eval: /sbin/md5: Input/output error Setting hostuuid: 30303030-3030-3030-3930-653766316463. Setting hostid: 0x. sysctl: invalid unsigned long '0x' eval: /sbin/swapon: Input/output error Fast boot: skipping disk checks. WARNING: / was not properly dismounted fsync: giving up on dirty (error =3D 45) 0xffffa00000d5f7c0: type VCHR usecount 1, writecount 0, refcount 25 seqc users 0 rdev 0xffffa00000f7b= c00 hold count flags () flags () v_object 0xffffa00000837b58 ref 0 pages 179 cleanbuf 22 dirtybuf 1 lock type mntfs: EXCL by thread 0xffffa00000ff6580 (pid 171, mount, tid 100084) mount: /dev/ufs/rootfs: Operation not supported Mounting root filesystem rw failed, startup aborted ERROR: ABORTING BOOT (sending SIGTERM to parent)! 2020-11-05T10:05:23.396207+00:00 - init 1 - - /bin/sh on /etc/rc terminated abnormally, going to single user mode input in flex scanner failed Growing root partition to fill device mmcsd0: Error indicated: 1 Timeout gpaOperation not supported mmcsd0: Error indicated: 1 Timeout gparOperation not supported gpart: arg0 'ufs/rootfs': Invalid argument mmcsd0: Error indicated: 1 Timeout growunable to read superblock: Input/output error No suitable dump device was found. mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout eval: /sbin/md5: Input/output error Setting hostuuid: 30303030-3030-3030-3930-653766316463. Setting hostid: 0x. sysctl: invalid unsigned long '0x' eval: /sbin/swapon: Input/output error Fast boot: skipping disk checks. WARNING: / was not properly dismounted --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-251018-227-R157jqObHg>