Date: Thu, 10 Aug 2000 16:17:24 -0700 From: Philippe Le Berre <philippe@le-berre.com> To: freebsd-stable@FreeBSD.ORG Subject: make buidlworld failure Message-ID: <4.3.2.7.2.20000810161212.00c55dc0@212.129.1.43> In-Reply-To: <Pine.BSF.4.21.0008101722540.77892-100000@turtle.looksharp. net> References: <3992CB87.778C3C52@math.missouri.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
Just received a new box this morning, I only had a 4.0 CD handy so I
installed it and after reboot was on to bring it to 4.1-stable.
Unfortunately it failed in the buildworld. As this is a brand new box and
that there is no report of stable failure I suspect a h/w issue (see dmesg
below).
Any thoughts.
TIA,
-philippe
--->>-------->>----------------
em.c /usr/src/lib/libc_r/uthread/uthread_tcdrain.c
/usr/src/lib/libc_r/uthread/uthread_v
fork.c /usr/src/lib/libc_r/uthread/uthread_wait.c
/usr/src/lib/libc_r/uthread/uthread_wa
it4.c /usr/src/lib/libc_r/uthread/uthread_waitpid.c
/usr/src/lib/libc_r/uthread/uthread_
write.c /usr/src/lib/libc_r/uthread/uthread_writev.c
/usr/src/lib/libc_r/uthread/uthread
_yield.c /usr/src/lib/libc_r/sys/uthread_error.c
mkdep -f .depend -a -I/usr/obj/usr/src/i386/usr/include/g++ -DLIBC_RCS
-DSYSLIBC_RCS
-I/usr/src/lib/libc_r/../libc/include -DPTHREAD_KERNEL -D_THREAD_SAFE
-I/usr/src/lib/lib
c_r/uthread -I/usr/src/lib/libc_r/../../include -D_LOCK_DEBUG
-D__DBINTERFACE_PRIVATE -D
INET6 -DPOSIX_MISTAKE -I/usr/src/lib/libc_r/../libc/locale -DBROKEN_DES
-DYP -I/usr/obj/
usr/src/i386/usr/include /usr/src/lib/libc_r/uthread/uthread_autoinit.cc
cd /usr/src/lib/libc_r; make _EXTRADEPEND
".depend", line 331: Need an operator
".depend", line 333: Need an operator
".depend", line 334: Need an operator
".depend", line 335: Need an operator
".depend", line 336: Need an operator
".depend", line 337: Need an operator
".depend", line 338: Need an operator
".depend", line 339: Need an operator
".depend", line 340: Need an operator
".depend", line 342: Need an operator
".depend", line 344: Need an operator
".depend", line 345: Inconsistent operator for fchown.S
".depend", line 346: Need an operator
".depend", line 347: Need an operator
".depend", line 350: Need an operator
".depend", line 351: Need an operator
".depend", line 352: Need an operator
".depend", line 353: Need an operator
".depend", line 354: Need an operator
".depend", line 355: Need an operator
".depend", line 356: Need an operator
".depend", line 357: Need an operator
".depend", line 358: Need an operator
".depend", line 372: Missing dependency operator
".depend", line 396: Need an operator
".depend", line 397: Need an operator
".depend", line 398: Need an operator
".depend", line 399: Need an operator
".depend", line 400: Need an operator
".depend", line 401: Need an operator
".depend", line 402: Need an operator
".depend", line 403: Need an operator
".depend", line 404: Need an operator
".depend", line 405: Need an operator
".depend", line 407: Need an operator
".depend", line 410: Need an operator
".depend", line 412: Need an operator
".depend", line 413: Need an operator
".depend", line 415: Need an operator
".depend", line 416: Need an operator
make: fatal errors encountered -- cannot continue
*** Error code 1
Stop in /usr/src/lib/libc_r.
*** Error code 1
Stop in /usr/src/lib.
*** Error code 1
---->>>>---------------------------
FreeBSD 4.0-RELEASE #0: Mon Mar 20 22:50:22 GMT 2000
root@monster.cdrom.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (651.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
MMX,FXSR,XMM>
real memory = 402636800 (393200K bytes)
avail memory = 386568192 (377508K bytes)
Preloaded elf kernel "kernel" at 0xc03c0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8605)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 12
pci0: <VIA 83C572 USB controller> at 4.3 irq 12
pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> at 13.0 irq 11
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xb800-0xb8ff mem
0xe4800000-0xe4800fff
irq 10 at device 14.0 on pci0
ahc0: aic7892 Wide Channel A, SCSI Id=7, 16/255 SCBs
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb400-0xb47f mem
0xe4000000-0xe400007f irq
12 at device 16.0 on pci0
xl0: Ethernet address: 00:50:da:e3:30:11
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: supplying EUI64: 00:50:da:ff:fe:e3:30:11
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xb000-0xb07f mem
0xe3800000-0xe380007f irq
11 at device 17.0 on pci0
xl1: Ethernet address: 00:01:02:19:a6:01
miibus1: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus1
xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
acd0: CDROM <CREATIVE CD5230E> at ata1-slave using PIO4
Waiting 15 seconds for SCSI devices to
settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 2 lun 0
da0: <WDIGTL WD91 ULTRA2 1.00> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8727MB (17873040 512 byte sectors: 255H 63S/T 1112C)
xl0: starting DAD for fe80:0001::0250:daff:fee3:3011
xl0: DAD complete for fe80:0001::0250:daff:fee3:3011 - no duplicates found
cd9660: RockRidge Extension
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.2.7.2.20000810161212.00c55dc0>