Date: Mon, 6 Oct 2008 08:33:57 -0700 From: Jeremy Chadwick <koitsu@FreeBSD.org> To: Don O'Neil <lists@lizardhill.com> Cc: freebsd-questions@freebsd.org Subject: Re: Can't add new 1TB disk in FreeBSD 6.1 Message-ID: <20081006153357.GA24159@icarus.home.lan> In-Reply-To: <498C8B62AC3C4663A58D134BFE231685@mickey> References: <D3314319D28D4C51B1D721DFFE21F942@mickey> <20081005013016.GA71103@icarus.home.lan> <498C8B62AC3C4663A58D134BFE231685@mickey>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Oct 06, 2008 at 08:03:46AM -0700, Don O'Neil wrote: > > I just swapped out an old 500G disk with a 1TB one and I'm trying to > > label it and mount it... > > > > If I run bsdlabel -w ad4, I get: > > > > bsdlabel: Geom not found > > > > If I run sysinstall, it tells me that it can't write to the disk. > > > > I've tried an old 'bypass': sysctl kern.geom.debugflags=16, but that > > didn't help. > > > > Can anyone help me get this new disk installed without having to boot > > off a recovery CD? The server is 500 miles away from me and I don't > > have direct console access. > > Can you provide output from dmesg, as well as "geom disk list"? > > OK... I tried: > > # dd if=/dev/zero of=/dev/ad4 bs=512 count=1000 > dd: /dev/ad4: Operation not permitted Did you "sysctl kern.geom.debugflags=16" before doing this? What's happening here is that GEOM isn't letting you overwrite the MBR on the disk. Setting kern.geom.debugflags=16 should permit that to happen. > # fdisk /dev/ad4 > ******* Working on device /dev/ad4 ******* > parameters extracted from in-core disklabel are: > cylinders=1938021 heads=16 sectors/track=63 (1008 blks/cyl) > > Figures below won't work with BIOS for partitions not in cyl 1 > parameters to be used for BIOS calculations are: > cylinders=1938021 heads=16 sectors/track=63 (1008 blks/cyl) > > fdisk: invalid fdisk partition table found This line right here looks very bad. I would recommend running sade(8) and properly configuring this disk. > Media sector size is 512 > Warning: BIOS sector numbering starts with sector 1 > Information from DOS bootblock is: > The data for partition 1 is: > sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > start 63, size 1953525105 (953869 Meg), flag 80 (active) > beg: cyl 0/ head 1/ sector 1; > end: cyl 612/ head 15/ sector 63 This portion looks okay, although I guess the addressing mode chosen is different on your system. Most of my systems show the end CHS as 1023/254/63. > Geometry output: > > Geom name: ad4 > Providers: > 1. Name: ad4 > Mediasize: 1000204886016 (932G) > Sectorsize: 512 > Mode: r0w0e0 > fwsectors: 63 > fwheads: 16 This looks okay. > Nothing exciting coming from dmesg. Thanks for providing the output like I requested. :-) -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081006153357.GA24159>