Date: Tue, 12 Dec 2006 18:52:35 +0100 From: Palle Girgensohn <girgen@FreeBSD.org> To: hardware@freebsd.org Cc: obrien@freebsd.org Subject: if_nfe on Asus M2N-SLI deluxe? Message-ID: <CE58D1E977FAEE998E36C40F@rambutan.pingpong.net>
next in thread | raw e-mail | index | archive | help
--==========7E13988D9A82C0ED67D9========== Content-Type: text/plain; charset=us-ascii; DELSP=yes; FORMAT=flowed Content-Transfer-Encoding: 7bit Hi! Does anybody know if if_nfe should work on the above motherboard? I snached the patch for FreeBSD-6.2 from <http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>; and tried it. The kernel and ifconfig seems happy, but it does not work; ifconfig reports "active" but ifconfig reports: nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> ether 00:17:31:86:aa:31 media: Ethernet autoselect (none) status: no carrier nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid 0x4 inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:17:31:86:b4:c6 media: Ethernet autoselect (none) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet 127.0.0.1 netmask 0xff000000 The media part of nfe1 looks bad, eh? Is it supposed to work? How can I help to get it working? FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else needed? /Palle --==========7E13988D9A82C0ED67D9========== Content-Type: text/plain; charset=utf-8; name="dmesg.boot" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.boot"; size=8114 Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #0: Wed Nov 29 11:57:06 CET 2006 girgen@rambutan.pingpong.net:/usr/obj/.a/banan/usr/src/sys/WORKSTATION Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3500+ (2210.20-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x40ff2 Stepping =3D 2 = Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC= A,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x2001<SSE3,CX16> AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=3D0x1d<LAHF,<b2>,<b3>,CR8> real memory =3D 2146369536 (2046 MB) avail memory =3D 2091245568 (1994 MB) ACPI APIC Table: <Nvidia AWRDACPI> ioapic0 <Version 1.1> irqs 0-23 on motherboard acpi0: <Nvidia AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at = device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 = at device 2.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered atapci0: <nVidia nForce MCP55 UDMA133 controller> port = 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 4.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce MCP55 SATA300 controller> port = 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem = 0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce MCP55 SATA300 controller> port = 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem = 0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 atapci3: <nVidia nForce MCP55 SATA300 controller> port = 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f mem = 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0 ata6: <ATA channel 0> on atapci3 ata7: <ATA channel 1> on atapci3 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 fxp0: <Intel 82558 Pro/100 Ethernet> port 0xac00-0xac1f mem = 0xfdeff000-0xfdefffff,0xfdc00000-0xfdcfffff irq 16 at device 6.0 on pci1 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:a0:c9:ce:11:26 fwohci0: <Texas Instruments TSB43AB22/A> mem = 0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 19 at device 11.0 on pci1 fwohci0: OHCI version 1.10 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:c8:2b:85 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:c8:2b:85 fwe0: Ethernet address: 02:11:d8:c8:2b:85 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) pci0: <multimedia> at device 6.1 (no driver attached) nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem = 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at = device 8.0 on pci0 miibus1: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus1 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, = auto nfe0: Ethernet address: 00:17:31:86:aa:31 nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem = 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at = device 9.0 on pci0 miibus2: <MII bus> on nfe1 e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus2 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, = auto nfe1: Ethernet address: 00:17:31:86:b4:c6 pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci6: <ACPI PCI bus> on pcib6 atapci4: <JMicron JMB363 SATA300 controller> port = 0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8c00-0x8c0f mem = 0xfdafe000-0xfdafffff irq 16 at device 0.0 on pci6 atapci4: AHCI Version 01.00 controller with 2 ports detected ata8: <ATA channel 0> on atapci4 ata9: <ATA channel 1> on atapci4 ata10: <ATA channel 2> on atapci4 pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0 pci7: <ACPI PCI bus> on pcib7 nvidia0: <GeForce 6200 TurboCache(TM)> mem = 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 16 at = device 0.0 on pci7 nvidia0: [GIANT-LOCKED] acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on = acpi0 sio0: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd67ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/1 kbd1 at ukbd0 uhid0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/1 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 3, iclass 3/1 ums0: 6 buttons and Z dir. Timecounter "TSC" frequency 2210201999 Hz quality 800 Timecounters tick every 0.801 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, = default to accept, logging disabled ad0: 152627MB <Seagate ST3160212A 3.AAJ> at ata0-master UDMA100 acd0: DVDR <Optiarc DVD RW AD-5170A/1.11> at ata0-slave UDMA66 cd0 at ata0 bus 0 target 1 lun 0 cd0: <Optiarc DVD RW AD-5170A 1.11> Removable CD-ROM SCSI-0 device=20 cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad0s1a --==========7E13988D9A82C0ED67D9==========--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CE58D1E977FAEE998E36C40F>