Date: Tue, 13 Feb 1996 23:56:15 +0100 From: se@zpr.uni-koeln.de (Stefan Esser) To: dwhite@resnet.uoregon.edu Subject: Re: NCR8150S + mach64 not happy Message-ID: <199602132256.AA14829@Sysiphos> Resent-Message-ID: <199602132257.OAA15435@freefall.freebsd.org> In-Reply-To: Doug White <dwhite@riley-net170-164.uoregon.edu> "Re: NCR8150S %2B mach64 not happy" (Feb 13, 13:48)
next in thread | previous in thread | raw e-mail | index | archive | help
On Feb 13, 13:48, Doug White wrote: } Subject: Re: NCR8150S + mach64 not happy } On Tue, 13 Feb 1996, Stefan Esser wrote: } } > Well, I already looked at your boot message log, } > and it appears you did not configure an interrupt } > for the PCI slot you placed the NCR card in ... } } I went into the system BIOS setup and gave it an address and now it works } under bsd. But that was two days ago :-) Sorry, deviating from old customs, I took two days off over the weekend, to find my mail inbox filled with >700 mails on Monday :) (honestly!) I've only now reduced this to those 100 I need to reply to, and your mail was one of the first that I answered ... } But I still have problems under DOS. A sustained xfer makes the cdrom } dismount the cd. I've contacted Symbios support on it. Shouldn't PCI } devices auto-configure anyway? Yes, PCI devices do. But your motherboard obviously didn't. That's not PCI's mistake. It's just the price you pay to have fully ISA compatible PCI cards (say the Buslogic 946C SCSI card) supported ... If you have a current generation Pentium PCI MB, then the PCI BIOS will assign one IRQ to each PCI device found, and you just have to specify which interrupts are available for PCI at all, not which one to use for each single slot. But given PC restrictions, this can make your ISA emulating PCI card break ... Regards, STefan -- Stefan Esser, Zentrum fuer Paralleles Rechnen Tel: +49 221 4706021 Universitaet zu Koeln, Weyertal 80, 50931 Koeln FAX: +49 221 4705160 ============================================================================== http://www.zpr.uni-koeln.de/~se <se@ZPR.Uni-Koeln.DE>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199602132256.AA14829>