Date: Thu, 3 Jun 1999 17:23:42 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: nclayton@lehman.com Cc: scsi@FreeBSD.ORG Subject: Re: Tapes written on 2.2.8 not readable on 3.2 (was Re: PR docs/6681) Message-ID: <Pine.BSF.4.05.9906031722200.77206-100000@semuta.feral.com> In-Reply-To: <19990601095207.S22307@lehman.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I've editted the PR to note this is a tape driver problem (if any). I'll need more info from Julian, but I'll contact him directly. On Tue, 1 Jun 1999 nclayton@lehman.com wrote: > Hi folks, > > I'm not on the SCSI list myself, I'm forwarding this on behalf of Julian > Stacey. > > I've been closing doc PRs, including docs/6681, and contacted Julian to see > if his PR was still relevant. > > In what follows, "> >" is my message to Julian, ">" is his reply. If any > of you SCSI gurus has the time could you take a look at this? > > Cheers, > > N > > On Tue, Jun 01, 1999 at 12:10:22AM +0200, Julian Stacey wrote: > > > It's this (from the PR); > > > > > > I suggest you append some of this info: > > > > > > (ncr0:5:0): "DEC TLZ06 (C)DEC 0389" type 1 removable SCSI 2 > > > st0(ncr0:5:0): Sequential-Access > > > st0(ncr0:5:0): 5.0 MB/s (200 ns, offset 8) > > > density code 0x0, drive empty > > > > > > DAT drive, does 2 Gig with 90M tape, or more with compression on. > > > SIngle slot height. > > > > Works on 2.2.8 > > > > > (ncr0:6:0): "TANDBERG TDC 3800 =04Y" type 1 removable SCSI 2 > > > st1(ncr0:6:0): Sequential-Access > > > st1(ncr0:6:0): asynchronous. > > > density code 0x0, drive empty > > > > > > A 525 M QIC drive, > > > reads 45 & 60M & 150M & 525M, > > > writes 150 & 525, > > > does variable block sizing by default > > > (mt blocksize 512 to suppress that). > > > Single slot height. > > > > Works on 2.2.8 > > 3.2-RELEASE Seems to move the drive, but couldn't read tapes written > > on 2.2.8 > > > > > (aha0:3:0): " " type 1 removable SCSI 1 > > > st0(aha0:3:0): Sequential-Access density code 0x5, drive empty > > > > > > A Cipher QIC-24 SCSI, does 60 Meg > > > Has a twist lever like a 5" floppy, & a pull out drawer. > > > Double height ie 2 slots. > > > > Works on 2.2.8 > > > > > I know that the switch to CAM broke some stuff, but I'm not sure how > > > extensive the breakage is -- if these aren't affected, and work with > > > -stable/-current then I'll update the Handbook. > > > > I have 2 TANDBERG TDC 3800 drives, one on > > > > 3.2-RELEASE > > sa0: <TANDBERG TDC 3800 =04Y> Removable Sequential Access SCSI-2 device > > sa0: 4.032MB/s transfers (4.032MHz, offset 7) > > > > one on > > > > 2.2.8-RELEASE > > (ncr0:6:0): "TANDBERG TDC 3800 =04Y" type 1 removable SCSI 2 > > st1(ncr0:6:0): Sequential-Access > > st1(ncr0:6:0): asynchronous. > > density code 0x0, drive empty > > > > Seems to me on brief experiment, > > 3.2 can write data that 2.2.8 can read, > > but 2.2.8 tapes are not readable on 3.2 system > > (a disaster for anyone relying on backup tapes (not me thankfully)). > > > > Anyway, that was just a quick check, > > maybe it's to do with the blocksize 512 stuff, > > but looks like this is a problem. > > > > As I have 2 drives, 1 on 2.2.8 & 1 on 3.2, I may be uniquely useful > > for test purposes for scsi team, feel free to pass my name along. > > I am not worried about installing current on the 3.2 Tandberg box, > > except that can't spare too much time for it. > > I am not prepared to destabilise my other main 2.2.8 Tandberg box though :-) > > > > In light of this nasty suprise I have cancelled plan to upgrade my 2.2.8 > > main system (that has the DEC TLZ06 DAT) until this problem is solved. > > Once it's solved for Tandberg, I can try. > > > > The system with the Cipher QIC-24 will be upgraded to 3.2 in about 2 weeks. > > & I can let you know about that. > > > > What was intended as a docu. upgrade has become a warning of peril :-) > > Thanks, I'm glad to know, let me know if I can help, > > feel free to cut/paste forward to scsi@ (not on that list myself). > > -- > --+==[ Systems Administrator, Year 2000 Test Lab, Lehman Brothers, Inc. ]==+-- > --+==[ 1 Broadgate, London, EC2M 7HA 0171-601-0011 x5514 ]==+-- > --+==[ Year 2000 Testing: It's about time. . . ]==+-- > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9906031722200.77206-100000>