Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 10 Nov 1996 04:33:24 +0300 (MSK)
From:      "=?KOI8-R?Q?=E1=CE=C4=D2=C5=CA_=FE=C5=D2=CE=CF=D7?=" (Andrey A. Chernov) <ache@nagual.ru>
To:        current@freebsd.org (FreeBSD-current), scsi@freebsd.org
Subject:   SCSI system becomes broken in -current?
Message-ID:  <199611100133.EAA00401@nagual.ru>

next in thread | raw e-mail | index | archive | help
It work for me without any error for very long time, but after
todays rebuild I often got:

sd0(ahc0:0:0): timed out in dataout phase, SCSISIGI == 0x0
Ordered Tag queued
Ordered Tag sent
sd0(ahc0:0:0): timed out in dataout phase, SCSISIGI == 0x0
sd0(ahc0:0:0): timed out in dataout phase, SCSISIGI == 0x0
ahc0: Issued Channel A Bus Reset. 4 SCBs aborted
sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
sd0(ahc0:0:0):  Power on, reset, or bus device reset occurred field replaceable unit: 14
, retries:3
sd1(ahc0:1:0): UNIT ATTENTION asc:29,0
sd1(ahc0:1:0):  Power on, reset, or bus device reset occurred
, retries:4
Ordered Tag sent
sd1(ahc0:1:0): NOT READY asc:4,1
sd1(ahc0:1:0):  Logical unit is in process of becoming ready
, retries:3
sd1(ahc0:1:0): NOT READY asc:4,1
sd1(ahc0:1:0):  Logical unit is in process of becoming ready
, retries:2
sd1(ahc0:1:0): NOT READY asc:4,1
sd1(ahc0:1:0):  Logical unit is in process of becoming ready
, retries:1
sd1(ahc0:1:0): NOT READY asc:4,1
sd1(ahc0:1:0):  Logical unit is in process of becoming ready
, FAILURE
sd0(ahc0:0:0): timed out in dataout phase, SCSISIGI == 0x0
Ordered Tag queued
Ordered Tag sent
Ordered Tag sent
sd0(ahc0:0:0): timed out in dataout phase, SCSISIGI == 0x0
sd0(ahc0:0:0): timed out in dataout phase, SCSISIGI == 0x0
ahc0: Issued Channel A Bus Reset. 4 SCBs aborted
sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
sd0(ahc0:0:0):  Power on, reset, or bus device reset occurred field replaceable unit: 14
, retries:3
sd1(ahc0:1:0): UNIT ATTENTION asc:29,0
sd1(ahc0:1:0):  Power on, reset, or bus device reset occurred
, retries:4

etc..............................................................
I have
ahc0: <Adaptec 284X SCSI host adapter> at 0x1c00-0x1cff irq 11 on eisa0 slot 1
ahc0: aic7770 >= Rev E, Single Channel, SCSI Id=7, 4 SCBs
ahc0: target 0 Tagged Queuing Device
(ahc0:0:0): "CONNER CFP1060S 1.05GB 2135" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 1013MB (2074880 512 byte sectors)
ahc0: target 1 Tagged Queuing Device
(ahc0:1:0): "IBM DORS-32160 S84A" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 2063MB (4226725 512 byte sectors)


-- 
Andrey A. Chernov
<ache@nagual.ru>
http://www.nagual.ru/~ache/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199611100133.EAA00401>