Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 09 May 1997 11:09:05 +0300 (IDT)
From:      Gennady Sorokopud <gena@NetVision.net.il>
To:        Brian Litzinger <brian@mpress.com>
Cc:        freebsd-current@FreeBSD.ORG, freebsd-smp@FreeBSD.ORG
Subject:   RE: Panic
Message-ID:  <XFMail.970509111054.gena@NetVision.net.il>
In-Reply-To: <19970508133903.59852@mpress.com>

next in thread | previous in thread | raw e-mail | index | archive | help
I'm getting those panics for already 2-3 weeks :-(. (i'm not using SMP).
One was caused by lstat on file with very long file name, all others .. god
knows. I just got one exactly like this 2 hours ago :-(.

On 08-May-97 Brian Litzinger wrote:
>Tyan S1668 Dual PP150 in dual processor mode.
>with make world and kernel late 5/6/97 PDT.
>
>Fatal trap 12: page fault while in kernel mode
>cpunumber = 0
>fault virtual address   = 0x44
>fault code              = supervisor read, page not present
>instruction pointer     = 0x8:0xf0111330
>stack pointer           = 0x10:0xf49bff30
>frame pointer           = 0x10:0xf49bff30
>code segment            = base 0x0, limit 0xfffff, type 0x1b
>                        = DPL 0, pres 1, def32, gran 1
>processor eflags        = interrupt enabled, resume, IOPL = 0
>current process         = 4 (update)
>interrupt mask          = 
>
>kernel: type 12 trap, code=0
>Stopped at _lockstatus+0x8:       cmpw    $0,0x10(%edx)
>
>
>Copyright (c) 1992-1997 FreeBSD Inc.
>Copyright (c) 1982, 1986, 1989, 1991, 1993
>       The Regents of the University of California. All rights reserved.
>FreeBSD 3.0-CURRENT #0: Thu May  8 02:38:55 GMT 1997
>    brian@research.mpress.com:/uss/src/sys-UP/compile/SMP
>FreeBSD/SMP: Multiprocessor motherboard
> cpu0 (BSP): apic id: 1, version: 0x00040011
> cpu1 (AP):  apic id: 0, version: 0x00040011
> io0 (APIC): apic id: 2, version: 0x00170011
>CPU: Pentium Pro (686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x612  Stepping=2
> 
>Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMOV
>>
>real memory  = 67108864 (65536K bytes)
>avail memory = 63348736 (61864K bytes)
>bdevsw_add_generic: adding D_DISK flag for device 7
>bdevsw_add_generic: adding D_DISK flag for device 16
>bdevsw_add_generic: adding D_DISK flag for device 17
>Probing for devices on PCI bus 0:
>chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0:0
>chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
>chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
>de0 <Digital 21040 Ethernet> rev 35 int a irq 19 on pci0:11:0
>Freeing (NOT implemented) redirected PCI irq 11.
>de0: 21040 [10Mb/s] pass 2.3
>de0: address 00:c0:95:ec:22:ef
>de0: enabling 10baseT port
>ahc0 <Adaptec 2940 SCSI host adapter> rev 3 int a irq 18 on pci0:12:0
>Freeing (NOT implemented) redirected PCI irq 15.
>ahc0: aic7870 Wide Channel, SCSI Id=7, 16 SCBs
>scbus0 at ahc0 bus 0
>sd0 at scbus0 target 0 lun 0
>sd0: <SEAGATE ST15150W 0009> type 0 fixed SCSI 2
>sd0: Direct-Access 4095MB (8388315 512 byte sectors)
>vga0 <VGA-compatible display device> rev 0 on pci0:13:0
>Probing for devices on the ISA bus:
>sc0 at 0x60-0x6f irq 1 on motherboard
>sc0: VGA color <16 virtual consoles, flags=0x0>
>ed0 not found at 0x280
>ed1 not found at 0x300
>sio0 at 0x3f8-0x3ff irq 4 on isa
>sio0: type 16550A
>sio1 at 0x2f8-0x2ff irq 3 on isa
>sio1: type 16550A
>sio2: disabled, not probed.
>lpt0 at 0x378-0x37f irq 7 on isa
>lpt0: Interrupt-driven port
>lp0: TCP/IP capable interface
>psm0: disabled, not probed.
>fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
>fdc0: NEC 72065B
>fd0: 1.44MB 3.5in
>wdc0 not found at 0x1f0
>wdc1 not found at 0x170
>aha0 not found at 0x330
>aic0 not found at 0x340
>wt0 not found at 0x300
>mcd0 not found at 0x300
>matcdc0 not found at 0x230
>scd0 not found at 0x230
>npx0 on motherboard
>npx0: INT 16 interface
>apm0: disabled, not probed.
>changing root device to sd0a
>Enabled INTs: 1, 2, 3, 4, 6, 7, 8, 18, 19, imen: 0x00f3fe21
>WARNING: / was not properly dismounted.
>SMP: All idle procs online.
>You can now activate SMP processing, use: sysctl -w kern.smp_active=2
>SMP: Starting 1st AP!
>SMP: AP CPU #1 LAUNCHED!!  Starting Scheduling...
>SMP: TADA! CPU #1 made it into the scheduler!.
>SMP: All 2 CPU's are online!
>-- 
>Brian Litzinger
>brian@mediacity.com

Best regards.
--------
 Gennady B. Sorokopud - System programmer at NetVision Israel.
 E-Mail: Gennady Sorokopud <gena@NetVision.net.il>
 PGP public key is available by fingering gena@netvision.net.il

 This message was sent at 09-May-97 11:09:06 by XFMail



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.970509111054.gena>