From owner-freebsd-sparc64@FreeBSD.ORG Thu Apr 14 00:04:17 2005 Return-Path: Delivered-To: freebsd-sparc64@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 74ADD16A4CE for ; Thu, 14 Apr 2005 00:04:17 +0000 (GMT) Received: from servww6.ww.uni-erlangen.de (servww6.ww.uni-erlangen.de [131.188.238.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2D7EC43D73 for ; Thu, 14 Apr 2005 00:04:16 +0000 (GMT) (envelope-from ardelean@ww.uni-erlangen.de) Received: from localhost (ardelean@localhost)ESMTP id j3E03mW02166 for ; Thu, 14 Apr 2005 02:03:48 +0200 Date: Thu, 14 Apr 2005 02:03:48 +0200 (CEST) From: Gheorghe Ardelean To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Subject: 5.4-RC2 hang on boot on Ultra1 X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 14 Apr 2005 00:04:17 -0000 Hi, While trying to boot a plain U1 from a disk installed with 5.4-RC2 (the disk was installed in a U5) the systems hangs just after entering the kernel. This is the message I get while booting: ok boot /sbus@1f,0/SUNW,fas@0,8800000/sd@0,0:a Boot device: /sbus@1f,0/SUNW,fas@0,8800000/sd@0,0:a File and args: >> FreeBSD/sparc64 boot block Boot path: /sbus@1f,0/SUNW,fas@0,8800000/sd@0,0:a Boot loader: /boot/loader Console: Open Firmware console FreeBSD/sparc64 bootstrap loader, Revision 1.0 (root@binkley.cse.buffalo.edu, Sun Apr 10 07:52:10 UTC 2005) bootpath="/sbus@1f,0/SUNW,fas@0,8800000/sd@0,0:a" Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x3d8708+0x47c78 syms=[0x8+0x50b08+0x8+0x451b8] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 8 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK boot -v nothing to autoload yet. jumping to kernel entry at 0xc0040000. <=After this point nothing happens Tested with both serial console and framebuffer. On the same setup an 5.3-R goes up to the point of using /dev/screen (which is not found) when used with framebuffer or up to the detection of the serial ports (and then it locks hard). Please help! Regards, G. Ardelean. ================================== P.S. The hardware on Ultra 1 is as follows: Sun Ultra 1 SBus (UltraSPARC 143MHz), No Keyboard OpenBoot 3.25, 320 MB memory installed, Serial #abcdxyz. Ethernet address 8:0:20:85:xx:yy, Host ID: 8085fxyz. ok probe-scsi-all /sbus@1f,0/QLGC,isp@1,10000 Target 0 Unit 0 Disk SEAGATE ST32550W HP0909125041 /sbus@1f,0/SUNW,fas@0,8800000 Target 0 Unit 0 Disk IBM DCAS-34330W S65AF36D039673H8009 /sbus@1f,0/espdma@e,8400000/esp@e,8800000 Target 1 Unit 0 Disk IBM DORS32160SUN2.1GWA7A Target 2 Unit 0 Disk SEAGATE ST19171W 2224 Target 6 Unit 0 Removable Read Only device TOSHIBA XM-5401TASUN4XCD1036 ===== output-device screen input-device keyboard =================================