Date: Tue, 11 Nov 2003 09:51:50 +0100 From: "=?iso-8859-1?Q?Kov=E1cs_J=E1nos?=" <kovacs.janos@ofi.hu> To: freebsd-stable@freebsd.org Subject: kernel panic on jailed sshd - 4.9-release Message-ID: <OF7868ECF7.780FBD5B-ONC1256DDB.002CB9FC-C1256DDB.0030B125@felvi.hu>
next in thread | raw e-mail | index | archive | help
Hi!
Just installed 4.9-RELEASE with jailed sshd over a null-mounted (bin,
dev,etc,usr)
dirs crashing. It's an IBM xSeries 345 with SMP with HT. (dmesg at the end)
The only one thing configured is a multi-VLAN interface. In the jail's dev
there was
MAKEDEV jail. The last debug msg from sshd is: Allocating pty.
The crash also happen with non-SMP kernel. The same things was OK on 4.8.
The same way jailed other services (bind, djbdns, oops, ...) works fine.
What else i should debug or what to show? Any idea what wrong I do?
KJ.
the kernel msg:
SMP 4 cpus
IdlePTD at phsyical address 0x0054d000
initial pcb at physical address 0x004767e0
panicstr: page fault
panic messages:
---
Fatal trap 12: page fault while in kernel mode
mp_lock = 00000002; cpuid = 0; lapic.id = 00000000
fault virtual address = 0x10
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc025863f
stack pointer = 0x10:0xf70dbe44
frame pointer = 0x10:0xf70dbe50
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 230 (sshd)
interrupt mask = none <- SMP: XXX
trap number = 12
panic: page fault
mp_lock = 00000002; cpuid = 0; lapic.id = 00000000
boot() called on cpu#0
syncing disks... 9
done
(kgdb) bt
#0 dumpsys () at /usr/src/sys/kern/kern_shutdown.c:487
#1 0xc0228cc3 in boot (howto=256) at /usr/src/sys/kern/kern_shutdown.c:316
#2 0xc022911c in poweroff_wait (junk=0xc040a039, howto=-1069507857)
at /usr/src/sys/kern/kern_shutdown.c:595
#3 0xc038b1b8 in trap_fatal (frame=0xf70dbe04, eva=16)
at /usr/src/sys/i386/i386/trap.c:974
#4 0xc038ae49 in trap_pfault (frame=0xf70dbe04, usermode=0, eva=16)
at /usr/src/sys/i386/i386/trap.c:867
#5 0xc038a9e7 in trap (frame={tf_fs = -150732776, tf_es = 16,
tf_ds = -397082608, tf_edi = -397032096, tf_esi = 0,
tf_ebp = -150094256, tf_isp = -150094288, tf_ebx =
-149905344,
tf_edx = -1069059496, tf_ecx = 1, tf_eax = 0, tf_trapno = 12,
tf_err = 0, tf_eip = -1071282625, tf_cs = 8, tf_eflags = 66118,
tf_esp = -1069059496, tf_ss = 0}) at
/usr/src/sys/i386/i386/trap.c:466
#6 0xc025863f in vcount (vp=0xf710a040) at
/usr/src/sys/kern/vfs_subr.c:2140
#7 0xc025d736 in revoke (p=0xe855c560, uap=0xf70dbf80)
at /usr/src/sys/kern/vfs_syscalls.c:3152
#8 0xc038b4e9 in syscall2 (frame={tf_fs = 47, tf_es = 47, tf_ds = 47,
tf_edi = 134643163, tf_esi = -1077939964, tf_ebp = -1077939952,
tf_isp = -150093868, tf_ebx = 673097428, tf_edx = -1, tf_ecx = 30,
tf_eax = 56, tf_trapno = 12, tf_err = 2, tf_eip = 673462888, tf_cs =
31,
tf_eflags = 647, tf_esp = -1077940028, tf_ss = 47})
at /usr/src/sys/i386/i386/trap.c:1175
#9 0xc037641b in Xint0x80_syscall ()
dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.9-RELEASE #5: Mon Nov 10 17:59:47 CET 2003
root@foo.felvi.hu:/usr/obj/usr/src/sys/KAAMOS
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147397632 (2097068K bytes)
avail memory = 2086113280 (2037220K bytes)
APIC_IO: MP table broken: 8259->APIC entry missing!
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
Programming 16 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 14, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 13, version: 0x000f0011, at 0xfec01000
io2 (APIC): apic id: 12, version: 0x000f0011, at 0xfec02000
Preloaded elf kernel "kernel" at 0xc052e000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 10 -> irq 2
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 6.0 irq 2
atapci0: <ServerWorks CSB5 ATA100 controller> port
0x700-0x70f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 3 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 4 -> irq 4
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> mem
0xfbfd0000-0xfbfdffff,0xfbfe0000-0xfbffffff irq 4 at device 3.0 on pci2
em0: Speed:1000 Mbps Duplex:Full
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
IOAPIC #1 intpin 6 -> irq 5
pci4: <PCI bus> on pcib4
aac0: <Adaptec SCSI RAID 2120S> mem 0xf0000000-0xf7ffffff irq 5 at device
4.0 on pci4
aac0: i960RX 100MHz, 112MB cache memory, optional battery present
aac0: Kernel 4.0-0, Build 6008, S/N b8b31a
aac0: Supported
Options=1f7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,NORECOND,SGMAP64,ALARM,NONDASD>
pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci5: <PCI bus> on pcib5
pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
IOAPIC #1 intpin 13 -> irq 7
IOAPIC #1 intpin 14 -> irq 9
pci6: <PCI bus> on pcib6
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port
0x2500-0x253f mem 0xeefe0000-0xeeffffff irq 7 at device 8.0 on pci6
em1: Speed:N/A Duplex:N/A
em2: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port
0x2540-0x257f mem 0xeefc0000-0xeefdffff irq 9 at device 8.1 on pci6
em2: Speed:N/A Duplex:N/A
pcib8: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
IOAPIC #1 intpin 11 -> irq 10
IOAPIC #1 intpin 12 -> irq 11
pci8: <PCI bus> on pcib8
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2600-0x26ff mem
0xecfe0000-0xecfeffff,0xecff0000-0xecffffff irq 10 at device 7.0 on pci8
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2700-0x27ff mem
0xecfc0000-0xecfcffff,0xecfd0000-0xecfdffff irq 11 at device 7.1 on pci8
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xc9fff,0xca000-0xcdfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, logging limited to 100 packets/entry by default
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
acd0: CDROM <CD-224E> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 34712MB (71091456 sectors)
aacd1: <Volume> on aac0
aacd1: 34712MB (71091456 sectors)
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/aacd0s1a
WARNING: / was not properly dismounted
kernel conf:
machine i386
cpu I686_CPU
ident KAAMOS
maxusers 0
makeoptions DEBUG=-g #Build kernel with gdb(1)
debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device
[keep this!]
options SOFTUPDATES #Enable FFS soft updates
support
options UFS_DIRHASH #Improve performance on
big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root
device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root
device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root,
CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3
[KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before
probing SCSI
options UCONSOLE #Allow users to grab the
console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time
extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in
/dev
options AHC_REG_PRETTY_PRINT # Print register bitfields
in debug
# output. Adds ~128k to
driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields
in debug
# output. Adds ~215k to
driver.
options NMBCLUSTERS=32768
options NULLFS
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
options IPFIREWALL_FORWARD #enable transparent proxy support
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by
default
options IPDIVERT #divert sockets
options IPFILTER #ipfilter support
options IPFILTER_LOG #ipfilter logging
options IPFILTER_DEFAULT_BLOCK #block all packets by default
options IPSTEALTH #support for stealth forwarding
options TCPDEBUG
options RANDOM_IP_ID
options ICMP_BANDLIM
options ACCEPT_FILTER_DATA
options ACCEPT_FILTER_HTTP
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk #
ATA disk drives
device atapicd #
ATAPI CDROM drives
device atapifd #
ATAPI floppy drives
device atapist #
ATAPI tape drives
options ATA_STATIC_ID #Static device
numbering
# SCSI Controllers
device ahb # EISA AHA1742
family
device ahc # AHA2940 and
onboard AIC7xxx devices
device ahd # AHA39320/29320 and
onboard AIC79xx devices
device amd # AMD 53C974 (Tekram
DC-390(T))
device isp # Qlogic family
device mpt # LSI-Logic
MPT/Fusion
device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic
(newer chipsets)
options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach
legacy NCR devices when
# both sym and ncr are
configured
device adv0 at isa?
device adw
device bt0 at isa?
device aha0 at isa?
device aic0 at isa?
device ncv # NCR 53C500
device nsp # Workbit Ninja
SCSI-3
device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus
(required)
device da # Direct Access
(disks)
device sa # Sequential Access
(tape etc)
device cd # CD
device pass # Passthrough device
(direct SCSI access)
# RAID controllers interfaced to the SCSI subsystem
device asr # DPT SmartRAID V,
VI and Adaptec SCSI RAID
device dpt # DPT Smartcache -
See LINT for options!
device iir # Intel Integrated
RAID
device mly # Mylex
AcceleRAID/eXtremeRAID
device ciss # Compaq SmartRAID
5* series
# RAID controllers
device aac # Adaptec FSA RAID,
Dell PERC2/PERC3
#device aacp # SCSI passthrough
for aac (requires CAM)
device ida # Compaq Smart RAID
device amr # AMI MegaRAID
device mlx # Mylex DAC960
family
device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for
X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
#options PCVT_SCANSET=2 # IBM keyboards are
non-std
device agp # support several
AGP chipsets
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 #
Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0
iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2
iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10
irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq
5
device sio3 at isa? disable port IO_COM4 irq
9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel
port bus (required)
device lpt # Printer
device plip # TCP/IP over
parallel
device ppi # Parallel port
interface device
#device vpo # Requires scbus and
da
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x
(``Tulip'')
device em # Intel PRO/1000
adapter Gigabit Ethernet Card (``Wiseman'')
device txp # 3Com 3cR990
(``Typhoon'')
device vx # 3Com 3c590, 3c595
(``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device miibus # MII bus
support
device dc # DEC/Intel 21143
and various workalikes
device fxp # Intel EtherExpress
PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI
10/100 NICs
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915
(``Starfire'')
device sis # Silicon Integrated
Systems SiS 900/SiS 7016
device ste # Sundance ST201
(D-Link DFE-550TX)
device tl # Texas Instruments
ThunderLAN
device tx # SMC EtherPower II
(83c170 ``EPIC'')
device vr # VIA Rhine, Rhine
II
device wb # Winbond W89C840F
device xl # 3Com 3c90x
(``Boomerang'', ``Cyclone'')
device bge # Broadcom BCM570x
(``Tigon III'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device ed0 at isa? disable port 0x280 irq
10 iomem 0xd8000
device ex
device ep
device fe0 at isa? disable port 0x300
# Xircom Ethernet
device xe
# PRISM I IEEE 802.11b wireless NIC.
device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device an
# The probe order of these is presently determined by
i386/isa/isa_compat.c.
device ie0 at isa? disable port 0x300 irq
10 iomem 0xd0000
#device le0 at isa? disable port 0x300 irq 5
iomem 0xd0000
device lnc0 at isa? disable port 0x280 irq
10 drq 0
device cs0 at isa? disable port 0x300
device sn0 at isa? disable port 0x300 irq
10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device vlan 10
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4
relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB
interface
device ohci # OHCI PCI->USB
interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface
Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass
storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3
Player
# USB Ethernet, requires mii
device aue # ADMtek USB
ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB
ethernet
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?OF7868ECF7.780FBD5B-ONC1256DDB.002CB9FC-C1256DDB.0030B125>