Date: Wed, 3 Mar 2004 11:56:40 -0000 From: "info" <info@kuendao.plus.com> To: <freebsd-smp@freebsd.org> Subject: system hang on supermicro P3TDDE MB Message-ID: <20040303115858.B9A1A43D1F@mx1.FreeBSD.org>
next in thread | raw e-mail | index | archive | help
Hi I hope this is the crrect place to ask and that the issue I have haven't
been covered before
but I've been searching on google and the mailing list archive and found
nothing similar. Thanks
In advance for any help.
My problem is I get random system hangs on an SMP kernel using 5.2.1-Current
when it hangs
I am completely unable to access the system and am forced to physically
reboot the system so I
am unable to see any error messages if there are any.
The system:
Supermicro P3TDDE MB
2 x PIII 1.3 Gz
1 GB Memory
FastTrack100 stripping RAID
I have noticed in my startup log that the version codes are not given for
the cpu0 (BSP) and the cpu1 (AP)
which is the only difference that I can see between my log and others posted
on the web. I have attached the
kernel boot up logs below. I have also attached the output of the mptable
command.
Mar 2 14:46:28 earth syslogd: kernel boot file is /boot/kernel/kernel
Mar 2 14:48:22 earth su: adrianph to root on /dev/ttyp0
Mar 2 17:25:59 earth kernel: npx0: [FAST]
Mar 2 17:25:59 earth kernel: avail memory = 1045352448 (996 MB)
Mar 2 17:25:59 earth kernel: avail memory = 1045352448 (996 MB)
Mar 2 17:25:59 earth kernel: ACPI APIC Table: <VIA694 AWRDACPI>
Mar 2 17:25:59 earth kernel: FreeBSD/SMP: Multiprocessor System Detected: 2
CPUs
Mar 2 17:25:59 earth kernel: cpu0 (BSP): APIC ID: 0
Mar 2 17:25:59 earth kernel: cpu1 (AP): APIC ID: 1
Mar 2 17:25:59 earth kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard
Mar 2 17:25:59 earth kernel: Pentium Pro MTRR support enabled
Mar 2 17:25:59 earth kernel: npx0: [FAST]
Mar 2 17:25:59 earth kernel: npx0: <math processor> on motherboard
Mar 2 17:25:59 earth kernel: npx0: INT 16 interface
Mar 2 17:25:59 earth kernel: acpi0: <VIA694 AWRDACPI> on motherboard
Mar 2 17:25:59 earth kernel: pcibios: BIOS version 2.10
Mar 2 17:25:59 earth kernel: Found $PIR table, 8 entries at 0xc00fdef0
Mar 2 17:25:59 earth kernel: acpi0: Power Button (fixed)
Mar 2 17:25:59 earth kernel: Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
Mar 2 17:25:59 earth kernel: acpi_timer0: <24-bit timer at 3.579545MHz>
port 0x4008-0x400b on acpi0
Mar 2 17:25:59 earth kernel: acpi_cpu0: <CPU> on acpi0
Mar 2 17:25:59 earth kernel: acpi_cpu1: <CPU> on acpi0
Mar 2 17:25:59 earth kernel: acpi_tz0: <Thermal Zone> on acpi0
Mar 2 17:25:59 earth kernel: acpi_button0: <Power Button> on acpi0
Mar 2 17:25:59 earth kernel: pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
Mar 2 17:25:59 earth kernel: pci0: <ACPI PCI bus> on pcib0
Mar 2 17:25:59 earth kernel: pcib0: slot 17 INTD is routed to irq 10
Mar 2 17:25:59 earth last message repeated 2 times
Mar 2 17:25:59 earth kernel: agp0: <VIA Generic host to PCI bridge> mem
0xf0000000-0xf3ffffff at device 0.0 on pci0
Mar 2 17:25:59 earth kernel: pcib1: <PCI-PCI bridge> at device 1.0 on pci0
Mar 2 17:25:59 earth kernel: pci1: <PCI bus> on pcib1
Mar 2 17:25:59 earth kernel: pcib1: slot 0 INTA is routed to irq 16
Mar 2 17:25:59 earth kernel: pci1: <display, VGA> at device 0.0 (no driver
attached)
Mar 2 17:25:59 earth kernel: atapci0: <Promise PDC20267 UDMA100 controller>
port 0xd000-0xd03f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007
mem 0xf9100000-0xf911ff
ff irq 18 at device 12.0 on pci0
Mar 2 17:25:59 earth kernel: atapci0: [MPSAFE]
Mar 2 17:25:59 earth kernel: ata2: at 0xc000 on atapci0
Mar 2 17:25:59 earth kernel: ata2: [MPSAFE]
Mar 2 17:25:59 earth kernel: ata3: at 0xc800 on atapci0
Mar 2 17:25:59 earth kernel: ata3: [MPSAFE]
Mar 2 17:25:59 earth kernel: fxp0: <Intel 82559 Pro/100 Ethernet> port
0xd400-0xd43f mem 0xf9000000-0xf90fffff,0xf9120000-0xf9120fff irq 19 at
device 13.0 on pci0
Mar 2 17:25:59 earth kernel: fxp0: Ethernet address 00:30:48:41:89:8b
Mar 2 17:25:59 earth kernel: miibus0: <MII bus> on fxp0
Mar 2 17:25:59 earth kernel: inphy0: <i82555 10/100 media interface> on
miibus0
Mar 2 17:25:59 earth kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
Mar 2 17:25:59 earth kernel: isab0: <PCI-ISA bridge> at device 17.0 on pci0
Mar 2 17:25:59 earth kernel: isa0: <ISA bus> on isab0
Mar 2 17:25:59 earth kernel: atapci1: <VIA 8233 UDMA100 controller> port
0xd800-0xd80f at device 17.1 on pci0
Mar 2 17:25:59 earth kernel: ata0: at 0x1f0 irq 14 on atapci1
Mar 2 17:25:59 earth kernel: ata0: [MPSAFE]
Mar 2 17:25:59 earth kernel: ata1: at 0x170 irq 15 on atapci1
Mar 2 17:25:59 earth kernel: ata1: [MPSAFE]
Mar 2 17:25:59 earth kernel: pci0: <serial bus, USB> at device 17.2 (no
driver attached)
Mar 2 17:25:59 earth kernel: pci0: <serial bus, USB> at device 17.3 (no
driver attached)
Mar 2 17:25:59 earth kernel: pci0: <serial bus, USB> at device 17.4 (no
driver attached)
Mar 2 17:25:59 earth kernel: fdc0: <Enhanced floppy controller (i82077,
NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
Mar 2 17:25:59 earth kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Mar 2 17:25:59 earth kernel: sio0: type 16550A
Mar 2 17:25:59 earth kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0
Mar 2 17:25:59 earth kernel: sio1: type 16550A
Mar 2 17:25:59 earth kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3
on acpi0
Mar 2 17:25:59 earth kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in
COMPATIBLE mode
Mar 2 17:25:59 earth kernel: ppc0: FIFO with 16/16/16 bytes threshold
Mar 2 17:25:59 earth kernel: ppbus0: <Parallel port bus> on ppc0
Mar 2 17:25:59 earth kernel: plip0: <PLIP network interface> on ppbus0
Mar 2 17:25:59 earth kernel: lpt0: <Printer> on ppbus0
Mar 2 17:25:59 earth kernel: lpt0: Interrupt-driven port
Mar 2 17:25:59 earth kernel: ppi0: <Parallel I/O> on ppbus0
Mar 2 17:25:59 earth kernel: orm0: <Option ROM> at iomem 0xcc000-0xd3fff on
isa0
Mar 2 17:25:59 earth kernel: sc0: <System console> on isa0
Mar 2 17:25:59 earth kernel: sc0: VGA <16 virtual consoles, flags=0x200>
Mar 2 17:25:59 earth kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df
iomem 0xa0000-0xbffff on isa0
Mar 2 17:25:59 earth kernel: atkbdc0: <Keyboard controller (i8042)> at port
0x64,0x60 on isa0
Mar 2 17:25:59 earth kernel: Timecounters tick every 10.000 msec
Mar 2 17:25:59 earth kernel: acd0: DVDROM <TOSHIBA DVD-ROM SD-M1612> at
ata0-master PIO4
Mar 2 17:25:59 earth kernel: ad4: 114440MB <WDC WD1200JB-75CRA0>
[232514/16/63] at ata2-master UDMA100
Mar 2 17:25:59 earth kernel: ar0: 114440MB <ATA RAID0 array> [14589/255/63]
status: READY subdisks:
Mar 2 17:25:59 earth kernel: disk0 READY on ad4 at ata2-master
Mar 2 17:25:59 earth kernel: SMP: AP CPU #1 Launched!
Mar 2 17:25:59 earth kernel: Mounting root from ufs:/dev/ar0s1a
============================================================================
====
mptable command output.
MPTable, version 2.0.15
----------------------------------------------------------------------------
---
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f5260
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x7d
mode: Virtual Wire
----------------------------------------------------------------------------
---
MP Config Table Header:
physical address: 0x000f1400
signature: 'PCMP'
base table length: 308
version: 1.4
checksum: 0x08
OEM ID: 'OEM00000'
Product ID: 'PROD00000000'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 30
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
----------------------------------------------------------------------------
---
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step
Flags
0 0x11 BSP, usable 6 11 1
0xfbff
1 0x11 AP, usable 6 11 1
0xfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
INT active-lo level 0 17:D 2 10
INT active-lo level 0 17:D 2 10
INT active-lo level 0 17:D 2 10
INT active-lo level 0 17:C 2 11
INT active-lo level 0 17:C 2 11
INT active-lo level 1 0:A 2 12
INT active-lo level 0 13:A 2 10
INT active-lo level 0 12:A 2 11
ExtINT conforms conforms 2 0 2 0
INT conforms conforms 2 1 2 1
INT conforms conforms 2 0 2 2
INT conforms conforms 2 3 2 3
INT conforms conforms 2 4 2 4
INT conforms conforms 2 5 2 5
INT conforms conforms 2 6 2 6
INT conforms conforms 2 7 2 7
INT active-hi edge 2 8 2 8
INT conforms conforms 2 9 2 9
INT conforms conforms 2 13 2 13
INT conforms conforms 2 14 2 14
INT conforms conforms 2 15 2 15
SMI conforms conforms 2 0 2 23
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 0 0:A 255 0
NMI conforms conforms 0 0:A 255 1
============================================================================
===
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040303115858.B9A1A43D1F>