Date: Sun, 14 May 2006 12:33:10 +0300 From: "Matti J. Karki" <mjk@iki.fi> To: freebsd-stable@freebsd.org Subject: Re: Reproducable file corruption on 6-STABLE Message-ID: <1b15366e0605140233n4e35ea99k88092b62c9315df1@mail.gmail.com> In-Reply-To: <20060514021012.GA61053@xor.obsecurity.org> References: <20060512235959.GA18154@psconsult.nl> <1b15366e0605131033w3c0ddc58t563ccecdf8745ae8@mail.gmail.com> <20060514021012.GA61053@xor.obsecurity.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 5/14/06, Kris Kennaway <kris@obsecurity.org> wrote: > On Sat, May 13, 2006 at 08:33:38PM +0300, Matti J. Karki wrote: > > On 5/13/06, Paul Schenkeveld <fb-stable@psconsult.nl> wrote: > > >Hello, > > > > > >When I try to copy a large (7GB+) file from one filesystem to another = the > > >copy is not equal to te source file. This behaviour can be reproduced > > >repeatedly. > > > > > >Details: > > > > > > - FreeBSD 6-STABLE, cvsupped yesterday > > > > Hi! > > > > I have very similar problem with my i386 6.1-STABLE installation. With > > 6.0 there were no problems. I have already eliminated bad hardware > > (memory, hard drive) and also overheating. I'm able to reproduce the > > problem with quite small files. 23 megabytes has been enough to get > > corrupted. I have softupdates enabled and the disk is an IDE drive. > > It is almost certainly to do with your specific hardware > configuration, or a nonstandard disk-related kernel option you are > using. Please specify your configuration in detail so others can > compare. > OK, here comes the details. The machine is an HP laptop (Pavilion 4423EA) with Fujitsu MHT2030AT IDE hard drive (28615,8MB). IDE controller is "ALi M5229 PCI Bus Master IDE Controller" from Acer Labs Inc. The system has 1GB of RAM. The system itself was FreeBSD 6.1-STABLE with GENERIC kernel from the installation media (so, I haven't compiled anything). No weird kernel options in use. Hardware should be very generic all in all. Now I have a 6.0-STABLE with GENERIC kernel back (from the installation media, no updates, patches, no nothing) and I have stress-tested the system. I was not able to reproduce file corrutions with 6.0 even though I tried to replicate all situations excactly like with 6.1. I have done upgrading and downgrading by using boot-only CD and selecting USER installation set for upgrading. Here are some relevant files and a dmesg: /boot/loader.conf: cpufreq_load=3D"YES" snd_driver_load=3D"YES" /etc/rc.conf: hostname=3D"freebsd.my.domain" ifconfig_sis0=3D"DHCP" keymap=3D"finnish.iso" linux_enable=3D"YES" usbd_enable=3D"YES" powerd_enable=3D"YES" dmesg (this actually is dmesg from 6.0): Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 =09The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: mobile AMD Athlon(tm) XP2400+ (1788.94-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x6a0 Stepping =3D 0 Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=3D0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow> real memory =3D 1005518848 (958 MB) avail memory =3D 974962688 (929 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link2: <ACPI PCI Link LNKC> on acpi0 pci_link3: <ACPI PCI Link LNKD> on acpi0 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 10 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 3 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0 pci_link8: <ACPI PCI Link LNKU> irq 9 on acpi0 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K7> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0000000-0xd0000fff irq 9 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xd0001000-0xd0001fff irq 5 at device 6.0 on pci0 pcm0: <Conexant CX20468 AC97 Codec> pcm0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <simple comms, generic modem> at device 8.0 (no driver attached) cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> irq 9 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 atapci0: <AcerLabs M5229 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8080-0x808f at device 16.0 on pci0 atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <bridge> at device 17.0 (no driver attached) sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x8c00-0x8cff mem 0xd0003000-0xd0003fff irq 11 at device 18.0 on pci0 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:0d:9d:81:50:13 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 0 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xdb000-0xdbfff,0xdc000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, iclass 3/1 kbd1 at ukbd0 uhid0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, iclass 3/1 uhid1: Microsoft Microsoft Wireless Optical Mouse\M-. 1.00, rev 2.00/0.07, addr 3, iclass 3/1 Timecounter "TSC" frequency 1788941820 Hz quality 800 Timecounters tick every 1.000 msec ad0: 28615MB <FUJITSU MHT2030AT 009B> at ata0-master UDMA100 acd0: CDRW <TOSHIBA DVD-ROM SD-R2312/1905> at ata1-master PIO4 Trying to mount root from ufs:/dev/ad0s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1b15366e0605140233n4e35ea99k88092b62c9315df1>