Date: Sun, 27 May 2018 17:51:28 -0300 From: Mario Lobo <lobo@bsd.com.br> To: freebsd-questions <FreeBSD-Questions@freebsd.org> Subject: Freebsd 11 STABEL and asus GL503VD skylake (Republic of Gamers) laptop Message-ID: <CA%2ByoEx_cXVmC29%2BEL5karua8rZ%2B8EXJ2rCVKPqQv49iYbsyifQ@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi;
FreeBSD Lap 11.2-PRERELEASE r333311: Mon May 7
I got almost all of it working, (graphics with drm-next is perfect) except
for the track pad and the SD card reader.
Here is the list of non-driver devices:
none0@pci0:0:8:0: class=0x088000 card=0x1bb01043 chip=0x19118086
rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core
Processor Gaussian Mixture Model'
class = base peripheral
none1@pci0:0:20:2: class=0x118000 card=0x1bb01043 chip=0xa1318086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H Thermal subsystem'
class = dasp
none3@pci0:0:22:0: class=0x078000 card=0x1bb01043 chip=0xa13a8086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H CSME HECI'
class = simple comms (possibly the trackpad)
none4@pci0:0:31:2: class=0x058000 card=0x1bb01043 chip=0xa1218086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PMC'
class = memory
none5@pci0:3:0:0: class=0xff0000 card=0x202f1043 chip=0x522910ec
rev=0x01 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTS5229 PCI Express Card Reader'
According to some reports, the track pad is supposed to be elantech but I
already have these on loader.conf
hw.psm.synaptics_support="1"
hw.psm.elantech_support="1"
hw.psm.trackpoint_support="1"
but the psm0 device doesn't show up. I can use a usb mouse without problems
but it would be nice to get the track pad to work.
As for the card reader, i found a PR to port openbsd's rtlx driver that
supports this chip but that was as far as I could go.
Except for the card reader (which shows up explicitly on the description),
I can figure out what the other devices are for.
Would anyone have any suggestion on what direction I should take?
Thanks,
--
Mario Lobo
http://www.mallavoodoo.com.br
FreeBSD since version 2.2.8 [not Pro-Audio.... YET!!]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2ByoEx_cXVmC29%2BEL5karua8rZ%2B8EXJ2rCVKPqQv49iYbsyifQ>