Date: Wed, 19 Mar 1997 13:25:16 +1030 (CST) From: Michael Smith <msmith@atrad.adelaide.edu.au> To: adonai@jump.net (Lee Crites) Cc: hackers@freebsd.org Subject: Re: still more digiboard and modem questions/problems... Message-ID: <199703190255.NAA21222@genesis.atrad.adelaide.edu.au> In-Reply-To: <1.5.4.32.19970318073133.0069556c@jump.net> from Lee Crites at "Mar 18, 97 01:31:33 am"
next in thread | previous in thread | raw e-mail | index | archive | help
Lee Crites stands accused of saying: > ALL of them used to say uucp:dialer. What changes them is a mystery to me. Various things. Don't worry about it too much, although you might want to mark the ports you settle on as modem ports in /etc/rc.serial. > * I added these records to /etc/ttys: > ttyD00 "/usr/libexec/getty std.57600" dialup on insecure > ttyD01 "/usr/libexec/getty std.57600" dialup on insecure > ttyD02 "/usr/libexec/getty std.57600" dialup on insecure > ttyD03 "/usr/libexec/getty std.57600" dialup on insecure > ttyD04 "/usr/libexec/getty std.57600" dialup off insecure > ttyD05 "/usr/libexec/getty std.57600" dialup off insecure > ttyD06 "/usr/libexec/getty std.57600" dialup off insecure > ttyD07 "/usr/libexec/getty std.57600" dialup off insecure > #cuaD00 "/usr/libexec/getty std.57600" dialup on insecure > cuaD01 "/usr/libexec/getty std.57600" dialup on insecure > cuaD02 "/usr/libexec/getty std.57600" dialup on insecure > cuaD03 "/usr/libexec/getty std.57600" dialup on insecure > cuaD04 "/usr/libexec/getty std.57600" dialup off insecure > cuaD05 "/usr/libexec/getty std.57600" dialup off insecure > cuaD06 "/usr/libexec/getty std.57600" dialup off insecure > cuaD07 "/usr/libexec/getty std.57600" dialup off insecure > cuaD00 "/usr/local/sbin/mgetty" dialup on insecure That's stupid 8). Why do you have gettys on both the dialin and dialout ports? > I got a suggestion to use mgetty instead of getty, so I compiled and > installed it from the ports area. As you can see, I'm testing one of both > (cuaD00 as mgetty and cuaD01 as getty). mgetty sucks (IMHO). Avoid it unless you're doing something special. You want to run a normal getty on the dialin (ttyD) port _only_. You will also want to make sure your modems are configured correctly. In particular, you want DCD-follows-carrier, no echo, no result codes. Something like at&c0e0q1&w will work for most Rockwell-based modems (note that c0/c1 varies, check your modem manual for the right sense for yours.) -- ]] Mike Smith, Software Engineer msmith@gsoft.com.au [[ ]] Genesis Software genesis@gsoft.com.au [[ ]] High-speed data acquisition and (GSM mobile) 0411-222-496 [[ ]] realtime instrument control. (ph) +61-8-8267-3493 [[ ]] Unix hardware collector. "Where are your PEZ?" The Tick [[
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199703190255.NAA21222>