Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 24 Aug 2014 15:05:23 +0200
From:      Nikolay Denev <ndenev@gmail.com>
To:        Stephen Stuart <stephen.stuart@gmail.com>
Cc:        freebsd-virtualization@freebsd.org
Subject:   Re: VirtIo errors inside VM with UFS-in-zvol
Message-ID:  <CA%2BP_MZHvzuwZuvfNJBb6s3hJEcUKZx56-Zc9RPpXgOs8SUuN%2BQ@mail.gmail.com>
In-Reply-To: <CAOb7DXGpDb1fALsLzbfAYk-9nQUoV5wWF9VJQwNDMQ2ZhBPkPg@mail.gmail.com>
References:  <CAOb7DXGpDb1fALsLzbfAYk-9nQUoV5wWF9VJQwNDMQ2ZhBPkPg@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Feb 19, 2014 at 6:38 PM, Stephen Stuart
<stephen.stuart@gmail.com> wrote:
> I have VMs running on FreeBSD 10.0, for which I made zvols to provide the
> block IO device for bhyve. When I boot from the installation ISO, gpart
> works inside the VM, but newfs does not, reporting vtbd0 errors. Likewise,
> dump does not work inside the VM (failing with too many vtbd0 hard errors),
> but if I shut down the VM and dump the filesystem by specifying the
> partition name in the host machine's ZFS space (/dev/zvol/zroot/VOLNAMEp2),
> dump works just fine.
>
> With a different VM, where I got smart and did all the gpart and newfs work
> outside the VM:
>
>     zfs create -V 10g zroot/WORKING
>     gpart create -s GPT /dev/zvol/zroot/WORKING
>     gpart add -t freebsd-boot -s 64k /dev/zvol/zroot/WORKING
>     gpart add -t freebsd-ufs -s 7525m /dev/zvol/zroot/WORKING
>     gpart add -t freebsd-swap /dev/zvol/zroot/WORKING
>     newfs /dev/zvol/zroot/WORKINGp2
>
> then install works fine inside the VM when I mount the filesystem and
> create fstab by hand, and dump inside the VM works fine.
>
> There's a somewhat related post here:
>
> https://groups.google.com/forum/#!msg/mailing.freebsd.fs/Iw7aONDm-3Y/gecBCQls8oYJ
>
> but I don't see anything specific to this issue. I'd like dump from inside
> the VM to work, the fact that it doesn't makes me concerned that there are
> issues lurking that might lead to data loss. Where do I go from here?
>
> Thanks,
> Stephen
> _______________________________________________
> freebsd-virtualization@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
> To unsubscribe, send any mail to "freebsd-virtualization-unsubscribe@freebsd.org"

Just to say I'm seeing the same issue.

I want to create i386 virt on an amd64 host, and downloaded
FreeBSD-10.0-RELEASE-i386-disc1.iso

I've created a zvol:
  zfs create -V20G zfs/freebsd-i386

Then starting bhyve:
  sh /usr/share/examples/bhyve/vmrun.sh -m2048m -d
/dev/zvol/zfs/freebsd-i386 -I FreeBSD-10.0-RELEASE-i386-disc1.iso -i
freebsd-i386

Installer starts, I'm going with the default of GPT partition using
the whole disk, but then I get this error:
  Error mounting partition /mnt:
  mount: /dev/vtbd0p2: Invalid argument

Trying to mount the partiton from the shell produces the same error,
and in dmesg I see this:
  vtbd0: hard error cmd=write 290-305

Running newfs outside of the virt works, and then I can mount inside
the virt and installer continues.

I'm running:

FreeBSD nas.home.lan 10.0-STABLE FreeBSD 10.0-STABLE #13 r270295M: Thu
Aug 21 22:05:37 UTC 2014
root@nas.home.lan:/usr/obj/usr/src/sys/NAS  amd64

--Nikolay



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BP_MZHvzuwZuvfNJBb6s3hJEcUKZx56-Zc9RPpXgOs8SUuN%2BQ>