Date: Tue, 08 Mar 2016 17:40:34 -0500 From: Eric McCorkle <eric@metricspace.net> To: Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Atheros 9462 detected but nonfunctional Message-ID: <3FBFFC30-0504-4948-A2D3-3AAC3E0FCC7E@metricspace.net> In-Reply-To: <CAJ-Vmo=Qg5-8EbSkbsivf7VBhSwe52y4WTHgfS36%2Bi6ADROaFA@mail.gmail.com> References: <86B2B57E-A595-490E-9A9A-67F14EA5BB90@metricspace.net> <CAJ-Vmo=zVkywvd%2B0zJjzxw6ZVFEXDuCgwEqe1U2OrdzhpVx7sA@mail.gmail.com> <92F6E55B-B086-4589-B37D-F2F85F8390E7@metricspace.net> <CAJ-Vmo=Qg5-8EbSkbsivf7VBhSwe52y4WTHgfS36%2Bi6ADROaFA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Attached. Both pciconf and athregs The price of the laptop varies based on what options you pick. However, its supply chain is pretty backlogged at the moment, so expect delays if you order one. On March 8, 2016 8:45:05 AM EST, Adrian Chadd <adrian.chadd@gmail.com> wrote: >compile and use 'athregs'. For now, you need to manually use it on >wlan0 after it's created (it no longer works on ath0): > >athregs -i wlan0 > >And report back what it says. > >I bet it's just rfkill and we need to configure it up properly. How >much is the laptop? > > > > >-adrian > > >On 8 March 2016 at 05:42, Eric McCorkle <eric@metricspace.net> wrote: >> There are, but I've tried flipping it on and off to no avail. Also, >the >> current setting is confirmed to be on in Linux. >> >> >> Just to make absolute certain I'm not screwing something up, what is >the >> best way to see what the card is doing at the low level? >> >> On March 8, 2016 8:38:42 AM EST, Adrian Chadd ><adrian.chadd@gmail.com> >> wrote: >>> >>> i wonder if its an rfkill switch setting. Is there an rfkill switch >or >>> button? >>> >>> >>> -a >>> >>> >>> On 8 March 2016 at 05:29, Eric McCorkle <eric@metricspace.net> >wrote: >>>> >>>> Hello, >>>> >>>> I am trying to diagnose an issue with an Atheros 9462 card. The >card is >>>> being detected, and seemingly works (reports no errors with >wpa_supplicant >>>> and friends), however, the radios seem completely nonfunctional, as >the card >>>> doesn't actually transmit or receive anything (I checked by turning >on >>>> packet logging and running scans/wpa_supplicant). >>>> >>>> There are errors reported in pciconf (it claims they are >correctable >>>> errors): receiver error, bad tlp, bad dllp. The Bluetooth >subsystem also >>>> suffered timeouts (very likely related). >>>> >>>> I have confirmed this is not a hardware problem by booting into >Linux >>>> with a live >>>> memstick and running a scan. >>>> >>>> I'm looking for advise on likely root causes and how to go about >>>> diagnosing the problem (I've never diagnosed a problem on a >*supported* card >>>> in FreeBSD before, so I'm relatively unfamiliar with the process). >>>> >>>> Best, >>>> Eric >>>> ________________________________ >>>> >>>> freebsd-wireless@freebsd.org mailing list >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless >>>> To unsubscribe, send any mail to >>>> "freebsd-wireless-unsubscribe@freebsd.org" >> >> >> -- >> Sent from my Android device with K-9 Mail. Please excuse my brevity. -- Sent from my Android device with K-9 Mail. Please excuse my brevity. [-- Attachment #2 --] CR 0000000c RXDP 00000000 CFG 00080100 MIRT 00000000 IER 00000001 TIMT 00000000 TXCFG 00020085 RXCFG 00000005 MIBC 00000000 TOPS 00000000 RXNPTO 00000008 TXNPTO 00000010 RPGTO 00000000 RPCNT 00000000 MACMISC 00000000 SPC_0 00000001 SPC_1 00000fd0 GTXTO 00190000 GTTM 00000002 CST 000f0000 DMADBG0 88888888 DMADBG1 00000000 DMADBG2 12249249 DMADBG3 00000000 DMADBG4 00000000 DMADBG5 00000000 DMADBG6 001a6418 DMADBG7 00000000 DCM_A 00000000 DCM_D 00000000 DCCFG 00000000 CCFG 00000000 CCUCFG 00000000 CPC0 00000000 CPC1 00000000 CPC2 00000000 CPC3 00000000 CPCOVF 00000000 D_SIFS 00000160 D_SLOT 0000018c D_EIFS 00003e38 D_MISC 00000100 D_SEQ 00000000 D_FPCTL 00000000 D_TXPSE 00010000 MAC_LED 00000803 RC 00000000 SCR 0102021b INTPEND 00004400 SFR e3768611 PCICFG 0800fe10 PCIEPMC 3a080400 SREV 0028f3ff AHBMODE 00000000 IASYNCM 00000002 ISYNCM 00023f60 SERDES 00000000 SERDES2 00000000 GPIOIO 00000000 GPIOOE 00000c67 GPIOPOL 00000000 GPIOIEV 00000000 GPIMUX1 00000000 GPIMUX2 00420000 GPOMUX1 00000000 GPOMUX2 00000000 GPOMUX3 00000000 OBS 00000200 RTC_RC 00000000 RTC_PLL 0000142c STA_ID0 77b31030 STA_ID1 b880cdbe BSS_ID0 ffffffff BSS_ID1 0000ffff SLOTTIME 08000800 TIME_OUT 08400b00 RSSI_THR 08000700 USEC 12e0002b BEACON 00000000 CFP_PER 00000000 TIMER0 00000000 TIMER1 00000000 TIMER2 00000000 TIMER3 00000000 CFP_DUR 00000000 RXFILTER 00081417 MCAST_0 02200010 MCAST_1 08801000 DIAG_SW 00000000 TSF_L32 47c89515 TSF_U32 00000000 TST_ADAC 00000000 DEF_ANT 00000001 QOS_MASK 000fc78f SEQ_MASK 0000000f OBSERV2 20000000 OBSERV1 00002880 LAST_TST d37efb79 NAV 00000000 RTS_OK 00000000 RTS_FAIL 00000000 ACK_FAIL 00000000 FCS_FAIL 00000000 BEAC_CNT 00000000 SLEEP1 00a00000 SLEEP2 00400000 SLEEP3 00000000 BSSMSKL ffffffff BSSMSKU 0000ffff TPC 3f3f1717 TFCNT 0000b2ea RFCNT 000cb312 RCCNT 00105e88 CCCNT 00740409 QUIET1 00020000 QUIET2 00000000 TSF_PARM 00000000 NOACK 00000052 PHY_ERR 00000000 QOS_CTRL 000100aa QOS_SEL 00003210 MISCMODE 18f04814 FILTOFDM 00000000 FILTCCK 00000000 PHYCNT1 0000002a PHYCMSK1 00020000 PHYCNT2 00000064 PHYCMSK2 02000000 TXOPX 000000ff NXTTBTT 88888888 NXTDBA 88888888 NXTSWBA 88888888 NXTCFP 88888888 NXTHCF 88888888 NXTDTIM 88888888 NXTQUIET 88888888 NXTNDP 88888888 BCNPER 00000000 DBAPER 00000000 SWBAPER 00000000 TIMPER 00000000 DTIMPER 00000000 QUIETPER 00000000 NDPPER 00000000 TIMERMOD 00100000 SLP32MOD 0010f400 SLP32WAK 00000800 SLP32INC 0001e800 SLPCNT 00000000 SLPMIB 00000000 2040MODE 00000000 EXTRCCNT 0063b799 PCUTXBUF 00000700 PHYTURBO fd14e000 [-- Attachment #3 --] hostb0@pci0:0:0:0: class=0x060000 card=0x16048086 chip=0x16048086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = 'Broadwell-U Host Bridge -OPI' class = bridge subclass = HOST-PCI cap 09[e0] = vendor (length 12) Intel cap 0 version 1 PCI errors = Received Master-Abort vgapci0@pci0:0:2:0: class=0x030000 card=0x55911991 chip=0x16168086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = 'Broadwell-U Integrated Graphics' class = display subclass = VGA bar [10] = type Memory, range 64, base 0xb1000000, size 16777216, enabled bar [18] = type Prefetchable Memory, range 64, base 0xc0000000, size 268435456, enabled bar [20] = type I/O Port, range 32, base 0x4000, size 64, enabled cap 05[90] = MSI supports 1 message cap 01[d0] = powerspec 2 supports D0 D3 current D0 cap 13[a4] = PCI Advanced Features: FLR TP hdac0@pci0:0:3:0: class=0x040300 card=0x160c8086 chip=0x160c8086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = 'Broadwell-U Audio Controller' class = multimedia subclass = HDA bar [10] = type Memory, range 64, base 0xb2214000, size 16384, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 05[60] = MSI supports 1 message enabled with 1 message cap 10[70] = PCI-Express 1 root endpoint max data 128(128) FLR NS link x0(x0) xhci0@pci0:0:20:0: class=0x0c0330 card=0x72708086 chip=0x9cb18086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Wildcat Point-LP USB xHCI Controller' class = serial bus subclass = USB bar [10] = type Memory, range 64, base 0xb2200000, size 65536, enabled cap 01[70] = powerspec 2 supports D0 D3 current D0 cap 05[80] = MSI supports 8 messages, 64 bit enabled with 1 message none0@pci0:0:22:0: class=0x078000 card=0x72708086 chip=0x9cba8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Wildcat Point-LP MEI Controller' class = simple comms bar [10] = type Memory, range 64, base 0xb221c000, size 32, enabled cap 01[50] = powerspec 3 supports D0 D3 current D0 cap 05[8c] = MSI supports 1 message, 64 bit hdac1@pci0:0:27:0: class=0x040300 card=0x72708086 chip=0x9ca08086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Wildcat Point-LP High Definition Audio Controller' class = multimedia subclass = HDA bar [10] = type Memory, range 64, base 0xb2210000, size 16384, enabled cap 01[50] = powerspec 3 supports D0 D3 current D0 cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message pcib1@pci0:0:28:0: class=0x060400 card=0x72708086 chip=0x9c908086 rev=0xe3 hdr=0x01 vendor = 'Intel Corporation' device = 'Wildcat Point-LP PCI Express Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x0(x1) speed 0.0(5.0) ASPM L0s/L1(L0s/L1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x72708086 cap 01[a0] = powerspec 3 supports D0 D3 current D0 pcib2@pci0:0:28:2: class=0x060400 card=0x72708086 chip=0x9c948086 rev=0xe3 hdr=0x01 vendor = 'Intel Corporation' device = 'Wildcat Point-LP PCI Express Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x1(x1) speed 2.5(5.0) ASPM L1(L0s/L1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x72708086 cap 01[a0] = powerspec 3 supports D0 D3 current D0 ecap 0000[100] = unknown 0 ecap 001e[200] = unknown 1 pcib3@pci0:0:28:3: class=0x060400 card=0x72708086 chip=0x9c968086 rev=0xe3 hdr=0x01 vendor = 'Intel Corporation' device = 'Wildcat Point-LP PCI Express Root Port' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port slot max data 128(128) link x1(x1) speed 2.5(5.0) ASPM L0s/L1(L0s/L1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x72708086 cap 01[a0] = powerspec 3 supports D0 D3 current D0 ecap 0000[100] = unknown 0 ecap 001e[200] = unknown 1 PCI-e errors = Correctable Error Detected ehci0@pci0:0:29:0: class=0x0c0320 card=0x72708086 chip=0x9ca68086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Wildcat Point-LP USB EHCI Controller' class = serial bus subclass = USB bar [10] = type Memory, range 32, base 0xb221a000, size 1024, enabled cap 01[50] = powerspec 3 supports D0 D3 current D0 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 cap 13[98] = PCI Advanced Features: FLR TP isab0@pci0:0:31:0: class=0x060100 card=0x72708086 chip=0x9cc38086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Wildcat Point-LP LPC Controller' class = bridge subclass = PCI-ISA cap 09[e0] = vendor (length 12) Intel cap 1 version 0 features: AMT, 4 PCI-e x1 slots ahci0@pci0:0:31:2: class=0x010601 card=0x72708086 chip=0x9c838086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Wildcat Point-LP SATA Controller [AHCI Mode]' class = mass storage subclass = SATA bar [10] = type I/O Port, range 32, base 0x40b0, size 8, enabled bar [14] = type I/O Port, range 32, base 0x40a0, size 4, enabled bar [18] = type I/O Port, range 32, base 0x4090, size 8, enabled bar [1c] = type I/O Port, range 32, base 0x4080, size 4, enabled bar [20] = type I/O Port, range 32, base 0x4060, size 32, enabled bar [24] = type Memory, range 32, base 0xb2219000, size 2048, enabled cap 05[80] = MSI supports 1 message enabled with 1 message cap 01[70] = powerspec 3 supports D0 D3 current D0 cap 12[a8] = SATA Index-Data Pair ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x72708086 chip=0x9ca28086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = 'Wildcat Point-LP SMBus Controller' class = serial bus subclass = SMBus bar [10] = type Memory, range 64, base 0xb2218000, size 256, enabled bar [20] = type I/O Port, range 32, base 0x4040, size 32, enabled re0@pci0:2:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x07 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller' class = network subclass = ethernet bar [10] = type I/O Port, range 32, base 0x3000, size 256, enabled bar [18] = type Memory, range 64, base 0xb2100000, size 4096, enabled bar [20] = type Prefetchable Memory, range 64, base 0xd0000000, size 16384, enabled cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[50] = MSI supports 1 message, 64 bit cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) RO link x1(x1) speed 2.5(2.5) ASPM disabled(L0s/L1) cap 11[b0] = MSI-X supports 4 messages, enabled Table in map 0x20[0x0], PBA in map 0x20[0x800] cap 03[d0] = VPD ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected ecap 0002[140] = VC 1 max VC0 ecap 0003[160] = Serial 1 01000000684ce000 ath0@pci0:3:0:0: class=0x028000 card=0x080211ad chip=0x0034168c rev=0x01 hdr=0x00 vendor = 'Qualcomm Atheros' device = 'AR9462 Wireless Network Adapter' class = network bar [10] = type Memory, range 64, base 0xb2000000, size 524288, enabled cap 01[40] = powerspec 2 supports D0 D1 D2 D3 current D0 cap 05[50] = MSI supports 4 messages, 64 bit, vector masks cap 10[70] = PCI-Express 2 endpoint max data 128(128) RO link x1(x1) speed 2.5(2.5) ASPM L0s/L1(L0s/L1) ecap 0001[100] = AER 1 0 fatal 0 non-fatal 3 corrected ecap 0002[140] = VC 1 max VC0 ecap 0003[160] = Serial 1 0000000000000000 PCI-e errors = Correctable Error Detected Corrected = Receiver Error Bad TLP Bad DLLP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FBFFC30-0504-4948-A2D3-3AAC3E0FCC7E>