Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 5 Jan 2012 20:31:58 +0000 (UTC)
From:      Pyun YongHyeon <yongari@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-8@freebsd.org
Subject:   svn commit: r229642 - stable/8/sys/dev/vr
Message-ID:  <201201052031.q05KVwZ7054215@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: yongari
Date: Thu Jan  5 20:31:58 2012
New Revision: 229642
URL: http://svn.freebsd.org/changeset/base/229642

Log:
  MFC r228086:
    Announce flow control capability to PHY drivers and enable flow
    control for all vr(4) controllers that support it.  It's known that
    old vr(4) controllers(Rhine II) does not support TX pause but Rhine
    III supports both TX and RX pause.
    Make TX pause really work on Rhine III by letting controller know
    available RX buffers.
    While here, adjust XON/XOFF parameters to get better performance
    with flow control.

Modified:
  stable/8/sys/dev/vr/if_vr.c
  stable/8/sys/dev/vr/if_vrreg.h
Directory Properties:
  stable/8/sys/   (props changed)
  stable/8/sys/amd64/include/xen/   (props changed)
  stable/8/sys/cddl/contrib/opensolaris/   (props changed)
  stable/8/sys/contrib/dev/acpica/   (props changed)
  stable/8/sys/contrib/pf/   (props changed)

Modified: stable/8/sys/dev/vr/if_vr.c
==============================================================================
--- stable/8/sys/dev/vr/if_vr.c	Thu Jan  5 20:30:16 2012	(r229641)
+++ stable/8/sys/dev/vr/if_vr.c	Thu Jan  5 20:31:58 2012	(r229642)
@@ -309,7 +309,7 @@ vr_miibus_statchg(device_t dev)
 	    (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
 		return;
 
-	sc->vr_flags &= ~VR_F_LINK;
+	sc->vr_flags &= ~(VR_F_LINK | VR_F_TXPAUSE);
 	if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
 	    (IFM_ACTIVE | IFM_AVALID)) {
 		switch (IFM_SUBTYPE(mii->mii_media_active)) {
@@ -346,7 +346,6 @@ vr_miibus_statchg(device_t dev)
 			CSR_WRITE_1(sc, VR_CR1, cr1);
 		}
 		fc = 0;
-#ifdef notyet
 		/* Configure flow-control. */
 		if (sc->vr_revid >= REV_ID_VT6105_A0) {
 			fc = CSR_READ_1(sc, VR_FLOWCR1);
@@ -355,8 +354,10 @@ vr_miibus_statchg(device_t dev)
 			    IFM_ETH_RXPAUSE) != 0)
 				fc |= VR_FLOWCR1_RXPAUSE;
 			if ((IFM_OPTIONS(mii->mii_media_active) &
-			    IFM_ETH_TXPAUSE) != 0)
+			    IFM_ETH_TXPAUSE) != 0) {
 				fc |= VR_FLOWCR1_TXPAUSE;
+				sc->vr_flags |= VR_F_TXPAUSE;
+			}
 			CSR_WRITE_1(sc, VR_FLOWCR1, fc);
 		} else if (sc->vr_revid >= REV_ID_VT6102_A) {
 			/* No Tx puase capability available for Rhine II. */
@@ -367,7 +368,6 @@ vr_miibus_statchg(device_t dev)
 				fc |= VR_MISCCR0_RXPAUSE;
 			CSR_WRITE_1(sc, VR_MISC_CR0, fc);
 		}
-#endif
 		vr_rx_start(sc);
 		vr_tx_start(sc);
 	} else {
@@ -770,7 +770,8 @@ vr_attach(device_t dev)
 	else
 		phy = CSR_READ_1(sc, VR_PHYADDR) & VR_PHYADDR_MASK;
 	error = mii_attach(dev, &sc->vr_miibus, ifp, vr_ifmedia_upd,
-	    vr_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY, 0);
+	    vr_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY,
+	    sc->vr_revid >= REV_ID_VT6102_A ? MIIF_DOPAUSE : 0);
 	if (error != 0) {
 		device_printf(dev, "attaching PHYs failed\n");
 		goto fail;
@@ -1400,6 +1401,17 @@ vr_rxeof(struct vr_softc *sc)
 	}
 
 	if (prog > 0) {
+		/*
+		 * Let controller know how many number of RX buffers
+		 * are posted but avoid expensive register access if
+		 * TX pause capability was not negotiated with link
+		 * partner.
+		 */
+		if ((sc->vr_flags & VR_F_TXPAUSE) != 0) {
+			if (prog >= VR_RX_RING_CNT)
+				prog = VR_RX_RING_CNT - 1;
+			CSR_WRITE_1(sc, VR_FLOWCR0, prog);
+		}
 		sc->vr_cdata.vr_rx_cons = cons;
 		bus_dmamap_sync(sc->vr_cdata.vr_rx_ring_tag,
 		    sc->vr_cdata.vr_rx_ring_map,
@@ -2075,14 +2087,32 @@ vr_init_locked(struct vr_softc *sc)
 
 	/* Set flow-control parameters for Rhine III. */
 	if (sc->vr_revid >= REV_ID_VT6105_A0) {
- 		/* Rx buffer count available for incoming packet. */
-		CSR_WRITE_1(sc, VR_FLOWCR0, VR_RX_RING_CNT);
 		/*
-		 * Tx pause low threshold : 16 free receive buffers
-		 * Tx pause XON high threshold : 48 free receive buffers
+		 * Configure Rx buffer count available for incoming
+		 * packet.
+		 * Even though data sheet says almost nothing about
+		 * this register, this register should be updated
+		 * whenever driver adds new RX buffers to controller.
+		 * Otherwise, XON frame is not sent to link partner
+		 * even if controller has enough RX buffers and you
+		 * would be isolated from network.
+		 * The controller is not smart enough to know number
+		 * of available RX buffers so driver have to let
+		 * controller know how many RX buffers are posted.
+		 * In other words, this register works like a residue
+		 * counter for RX buffers and should be initialized
+		 * to the number of total RX buffers  - 1 before
+		 * enabling RX MAC.  Note, this register is 8bits so
+		 * it effectively limits the maximum number of RX
+		 * buffer to be configured by controller is 255.
+		 */
+		CSR_WRITE_1(sc, VR_FLOWCR0, VR_RX_RING_CNT - 1);
+		/*
+		 * Tx pause low threshold : 8 free receive buffers
+		 * Tx pause XON high threshold : 24 free receive buffers
 		 */
 		CSR_WRITE_1(sc, VR_FLOWCR1,
-		    VR_FLOWCR1_TXLO16 | VR_FLOWCR1_TXHI48 | VR_FLOWCR1_XONXOFF);
+		    VR_FLOWCR1_TXLO8 | VR_FLOWCR1_TXHI24 | VR_FLOWCR1_XONXOFF);
 		/* Set Tx pause timer. */
 		CSR_WRITE_2(sc, VR_PAUSETIMER, 0xffff);
 	}
@@ -2110,7 +2140,7 @@ vr_init_locked(struct vr_softc *sc)
 	ifp->if_drv_flags |= IFF_DRV_RUNNING;
 	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
 
-	sc->vr_flags &= ~VR_F_LINK;
+	sc->vr_flags &= ~(VR_F_LINK | VR_F_TXPAUSE);
 	mii_mediachg(mii);
 
 	callout_reset(&sc->vr_stat_callout, hz, vr_tick, sc);
@@ -2132,6 +2162,7 @@ vr_ifmedia_upd(struct ifnet *ifp)
 	mii = device_get_softc(sc->vr_miibus);
 	LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
 		mii_phy_reset(miisc);
+	sc->vr_flags &= ~(VR_F_LINK | VR_F_TXPAUSE);
 	error = mii_mediachg(mii);
 	VR_UNLOCK(sc);
 

Modified: stable/8/sys/dev/vr/if_vrreg.h
==============================================================================
--- stable/8/sys/dev/vr/if_vrreg.h	Thu Jan  5 20:30:16 2012	(r229641)
+++ stable/8/sys/dev/vr/if_vrreg.h	Thu Jan  5 20:31:58 2012	(r229642)
@@ -722,6 +722,7 @@ struct vr_softc {
 	uint8_t			vr_revid;	/* Rhine chip revision */
 	int			vr_flags;	/* See VR_F_* below */
 #define	VR_F_RESTART		0x0001		/* Restart unit on next tick */
+#define	VR_F_TXPAUSE		0x0010
 #define	VR_F_SUSPENDED		0x2000
 #define	VR_F_DETACHED		0x4000
 #define	VR_F_LINK		0x8000



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201201052031.q05KVwZ7054215>