From owner-freebsd-current Sun Sep 5 7:14:13 1999 Delivered-To: freebsd-current@freebsd.org Received: from hcshh.hcs.de (hcshh.hcs.de [194.123.40.1]) by hub.freebsd.org (Postfix) with SMTP id A83E914CEF for ; Sun, 5 Sep 1999 07:13:52 -0700 (PDT) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (2676 bytes) by hcshh.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Sun, 5 Sep 1999 16:12:39 +0200 (CEST) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Smail3.1.29.0 #13) id m11Nd26-0003cyC; Sun, 5 Sep 99 16:12 METDST Message-Id: From: hm@hcs.de (Hellmuth Michaelis) Subject: PnP card + pcm = unable to boot To: freebsd-current@freebsd.org Date: Sun, 5 Sep 1999 16:12:38 +0200 (METDST) Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1998 Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG For those currently working on the pnp stuff: i just made a new userland and kernel of -current and i'm unable to boot that kernel anymore, even after disabling the pcm driver with boot -c and even after removing my pcm0 line from my kernel config file. The last kernel from Aug 31 booted fine with this device: Probing for PnP devices: Trying Read_Port at 203 PnP: CSN 1 COMP_DEVICE_ID = 0x06b0d041 CSN 1 Vendor ID: TER1411 [0x1114b250] Serial 0xffffffff Comp ID: PNPb006 [0x06b0 d041] Called nullpnp_probe with tag 0x00000001, type 0x1114b250 Called nullpnp_probe with tag 0x00000001, type 0x06b0d041 port 0x0220 0x0388 0x0530 0x0000 irq 5:0 drq 1:3 en 1 port 0x0220 0x0388 0x0530 0x0000 irq 5:0 drq 1:3 en 1 mss_attach 1 at 0x530 irq 5 dma 1:3 flags 0x13 pcm1 (CS423x/Yamaha/AD1816 sn 0xffffffff) at 0x530 -0x53f irq 5 drq 1 flags 0x13 on isa Now i get with the pcm driver removed the following output: unknown0 at port 0x220-0x22f, 0x388-0x33b, \ 0x530-0x53f irq 7 drq0,1 on isa 0 unknown1 at port 0x330-0x331, irq 9 on isa 0 unknown2 at port 0x200-0x207 on isa 0 unknown2 at port 0x590-0x597 on isa 0 and there any output stops. I'm not even able to go into the compiled-in ddb. At this point the only thing helps is pressing the reset switch. With the pcm driver compiled in, unknown0 gets pcm0 and a Soundblaster Pro 3.2 and unknown1 gets pcm1 with the correct chipset type but output stops and the kernel hangs at the same place. I'll be happy to provide more information if needed! hellmuth -- Hellmuth Michaelis Tel +49 40 559747-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 559747-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de 22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message