Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Jul 2011 20:26:17 +0800
From:      Li-Wen Hsu <lwhsu@FreeBSD.org>
To:        Eugene Grosbein <egrosbein@rdtc.ru>
Cc:        freebsd-python@freebsd.org
Subject:   Re: devel/py-qt4-svg is broken
Message-ID:  <CAKBkRUw_7QUtZGZw1yx9GybeCt%2B-Exi=nTTGnDDo1XdDAE=iig@mail.gmail.com>
In-Reply-To: <4E1D788F.5020809@rdtc.ru>
References:  <4E1D788F.5020809@rdtc.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

Sorry that I cannot help you with this immediately.  May I suggest you
try to contact with kde@FreeBSD.org, the maintainer of this port?  I
think they know about this more than us.

Best,
Li-Wen

On Wed, Jul 13, 2011 at 18:50, Eugene Grosbein <egrosbein@rdtc.ru> wrote:
> Hi!
>
> devel/py-qt4-svg is broken, port's Makefile runs REINPLACE_CMD on non-exi=
sting file:
>
> =3D=3D=3D> =C2=A0License check disabled, port has not defined LICENSE
> =3D=3D=3D> =C2=A0Found saved configuration for py26-qt4-svg-4.8.3,1
> =3D=3D=3D> =C2=A0Extracting for py27-qt4-svg-4.8.3,1
> =3D> SHA256 Checksum OK for PyQt-x11-gpl-4.8.3.tar.gz.
> =3D=3D=3D> =C2=A0Patching for py27-qt4-svg-4.8.3,1
> =3D=3D=3D> =C2=A0Applying FreeBSD patches for py27-qt4-svg-4.8.3,1
> =3D=3D=3D> =C2=A0 py27-qt4-svg-4.8.3,1 depends on package: py27-sip>=3D4.=
12.1 - found
> =3D=3D=3D> =C2=A0 py27-qt4-svg-4.8.3,1 depends on file: /usr/local/bin/py=
thon2.7 - found
> =3D=3D=3D> =C2=A0 py27-qt4-svg-4.8.3,1 depends on file: /usr/local/bin/qm=
ake-qt4 - found
> =3D=3D=3D> =C2=A0 py27-qt4-svg-4.8.3,1 depends on file: /usr/local/lib/qt=
4/libQtSvg.so - found
> =3D=3D=3D> =C2=A0 py27-qt4-svg-4.8.3,1 depends on shared library: qscinti=
lla2.5 - found
> =3D=3D=3D> =C2=A0Configuring for py27-qt4-svg-4.8.3,1
> cd /var/tmp/usr/local/ports/graphics/py-qt4-svg/work/PyQt-x11-gpl-4.8.3 &=
& /usr/bin/env PYQT4_COMPONENT=3D"svg" PYTHON=3D"/usr/local/bin/python2.7" =
MOC=3D"/usr/local/bin/moc-qt4" UIC=3D"/usr/local/bin/uic-qt4" CPPFLAGS=3D" =
" LIBS=3D"" =C2=A0QMAKE=3D"/usr/local/bin/qmake-qt4" QMAKESPEC=3D"/usr/loca=
l/share/qt4/mkspecs/freebsd-g++" QTDIR=3D"/usr/local" SHELL=3D/bin/sh CONFI=
G_SHELL=3D/bin/sh /usr/local/bin/python2.7 configure.py -b /usr/local/bin -=
d /usr/local/lib/python2.7/site-packages -p /usr/local/lib/qt4/plugins -q /=
usr/local/bin/qmake-qt4 --confirm-license --enable QtSvg --qsci-api --qsci-=
api-destdir=3D/usr/local/share/qt4/qsci --sipdir /usr/local/share/py-sip
> Determining the layout of your Qt installation...
> This is the GPL version of PyQt 4.8.3 (licensed under the GNU General Pub=
lic
> License) for Python 2.7.2 on freebsd8.
> Found the license file pyqt-gpl.sip.
> Checking to see if the QtSvg module should be built...
> Qt v4.6.3 free edition is being used.
> SIP 4.12.1 is being used.
> The Qt header files are in /usr/local/include/qt4.
> The shared Qt libraries are in /usr/local/lib/qt4.
> The Qt binaries are in /usr/local/bin.
> The Qt mkspecs directory is in /usr/local/share/qt4.
> These PyQt modules will be built: QtCore.
> The PyQt Python package will be installed in
> /usr/local/lib/python2.7/site-packages.
> PyQt is being built with generated docstrings.
> The QScintilla API file will be installed in
> /usr/local/share/qt4/qsci/api/python.
> The PyQt .sip files will be installed in /usr/local/share/py-sip.
> Creating QScintilla API file...
> Creating top level Makefile...
> /usr/bin/sed -i.bak -e 's|mkspecs/freebsd-g++|share/qt4/mkspecs/freebsd-g=
++|' -e 's|CC =3D cc|CC =3D cc|' -e 's|CXX =3D c++|CXX =3D c++|' -e 's|LINK=
 =3D c++|LINK =3D c++|' /var/tmp/usr/local/ports/graphics/py-qt4-svg/work/P=
yQt-x11-gpl-4.8.3/QtSvg/Makefile
> sed: /var/tmp/usr/local/ports/graphics/py-qt4-svg/work/PyQt-x11-gpl-4.8.3=
/QtSvg/Makefile: No such file or directory
> *** Error code 1
>
> Stop in /usr/local/ports/graphics/py-qt4-svg.
> *** Error code 1
>
> Stop in /usr/local/ports/graphics/py-qt4-svg.
>
>
> Eugene Grosbein
> _______________________________________________
> freebsd-python@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-python
> To unsubscribe, send any mail to "freebsd-python-unsubscribe@freebsd.org"
>



--=20
Li-Wen Hsu
http://lwhsu.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKBkRUw_7QUtZGZw1yx9GybeCt%2B-Exi=nTTGnDDo1XdDAE=iig>