Date: Wed, 23 Jan 2002 15:01:48 +0100 (CET) From: Heiko Recktenwald <uzs106@ibm.rhrz.uni-bonn.de> To: cameron grant <gandalf@vilnya.demon.co.uk> Cc: multimedia@FreeBSD.ORG Subject: Re: Trident 4DWave DX Message-ID: <Pine.BSF.4.21.0201231426330.565-100000@moritz.alleswirdgelber> In-Reply-To: <00ed01c1a2e1$95270bf0$4004020a@haveblue>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks a lot. cd /dev; ./*V snd0; mixer, never saw so many options.
But no audio in the headphone, some clicks when I turned some meters to
100. Maybe the card is broken. Or something else. The machine hangs now
after second reboot and xaudio some.mp3.
It is an old Asus 90 MHz with an Award PNP bios of 1995 and
"Autoconfigure" on. Maybe I can do something more.
Reset:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Mon Jan 21 04:03:11 CET 2002
uzs106@merlin.alleswirdgelber:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (89.81-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x526 Stepping = 6
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 83886080 (81920K bytes)
avail memory = 78381056 (76544K bytes)
Preloaded elf kernel "kernel" at 0xc032a000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX ATA controller> port 0xe800-0xe80f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <S3 864 graphics accelerator> at 9.0
pcm0: <Trident 4DWave DX> port 0xe400-0xe4ff mem 0xfafff000-0xfaffffff irq 12 at device 10.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xfaffe000-0xfaffe0ff irq 10 at device 11.0 on pci0
rl0: Ethernet address: 00:30:84:76:70:96
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 1222MB <QUANTUM FIREBALL_TM1280A> [2484/16/63] at ata0-master WDMA2
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
H.
Mixer vol is currently set to 75:75
Mixer bass is currently set to 50:50
Mixer treble is currently set to 50:50
Mixer pcm is currently set to 75:75
Mixer speaker is currently set to 75:75
Mixer line is currently set to 75:75
Mixer mic is currently set to 0:0
Mixer cd is currently set to 75:75
Mixer rec is currently set to 0:0
Mixer line1 is currently set to 75:75
Mixer phin is currently set to 0:0
Mixer phout is currently set to 0:0
Mixer video is currently set to 75:75
Mixer monitor is currently set to 0:0
On Tue, 22 Jan 2002, cameron grant wrote:
> > pcm0: <Trident 4DWave DX> irq 0 at device 10.0 on pci0
> > pcm0: unable to map register space
> > device_probe_and_attach: pcm0 attach returned 6
> >
> > We had this thread allready, the card is falsly in man pcm,
> > still in 4.3, isnt it ?
> >
> > Any chance to make it run some day ?
>
> your bios is not assigning resources to the card. check pnp-os is off.
>
> my 4dwave dx works fine.
>
> -cg
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-multimedia" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0201231426330.565-100000>