From owner-freebsd-scsi Mon Jan 27 16:58:02 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id QAA00842 for freebsd-scsi-outgoing; Mon, 27 Jan 1997 16:58:02 -0800 (PST) Received: from cabri.obs-besancon.fr (cabri.obs-besancon.fr [193.52.184.3]) by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id QAA00744; Mon, 27 Jan 1997 16:57:13 -0800 (PST) Received: by cabri.obs-besancon.fr (5.57/Ultrix3.0-C) id AA01641; Tue, 28 Jan 97 01:00:50 +0100 Date: Tue, 28 Jan 97 01:00:50 +0100 Message-Id: <9701280000.AA01641@cabri.obs-besancon.fr> From: Jean-Marc Zucconi To: se@freebsd.org Cc: se@freebsd.org, freebsd-scsi@freebsd.org In-Reply-To: Subject: Re: 2 NCR controllers, problem. X-Mailer: Emacs Sender: owner-freebsd-scsi@freebsd.org X-Loop: FreeBSD.org Precedence: bulk >>>>> Stefan Esser writes: > On Jan 25, jmz@cabri.obs-besancon.fr (Jean-Marc Zucconi) wrote: >> >>>>> Stefan Esser writes: >> In fact this is not a problem because that this is the second >> controller. I tried to boot after having removed the 1st NCR and the >> bios does not recognize the DAT (the machine does not boot however >> because the drive has no OS on it). >> Of course this does not explain why a 1542 see the DAT (they both use >> the same scsi attach routine?) nor why I can make the DAT to appear >> when I use scsi(8) > You may need to extend the probe wait time: > options SCSI_DELAY=30 30 is very long! Setting SCSI_DELAY=8 already works :-) Thanks for the tip, Jean-Marc _____________________________________________________________________________ Jean-Marc Zucconi Observatoire de Besancon F 25010 Besancon cedex PGP Key: finger jmz@cabri.obs-besancon.fr =============================================================================