Date: Mon, 29 Mar 2004 13:40:01 +0200 From: Bernd Walter <ticso@cicely12.cicely.de> To: lists@battleface.com Cc: FreeBSD - questions <freebsd-questions@freebsd.org> Subject: Re: Enabling USB ports for...stuff/printing... Message-ID: <20040329114000.GG26269@cicely12.cicely.de> In-Reply-To: <63702CFC-7CCE-11D8-B501-000A95775140@battleface.com> References: <63702CFC-7CCE-11D8-B501-000A95775140@battleface.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Mar 23, 2004 at 08:31:28AM -0500, lists@battleface.com wrote: > Running 4.9-STABLE, CUPS 1.1.19 and I'm trying to get an Epson Photo > Stylus 1270 (usb) working with the system and CUPS. So far, no luck. > I've walked through the setup for CUPS via http://127.0.0.1:631/. I'm > at a loss to figure this out. What am I missing? Here's what I have. > > % ls /dev/ulpt* > > crw------- 1 root wheel 113, 0 Mar 23 08:16 /dev/ulpt0 > crw------- 1 root wheel 113, 1 Mar 23 08:16 /dev/ulpt1 > crw------- 1 root wheel 113, 2 Mar 23 08:16 /dev/ulpt2 > crw------- 1 root wheel 113, 3 Mar 23 08:16 /dev/ulpt3 > crw------- 1 root wheel 113, 4 Mar 23 08:16 /dev/ulpt4 > > > % usbdevs -v > > Controller /dev/usb0: > addr 1: self powered, config 1, OHCI root hub(0x0000), AMD(0x0000), rev > 1.00 > port 1 disabled > port 2 disabled > port 3 disabled > port 4 disabled No printer attached => you can't use it. Check cabeling and please send your dmesg output if you think cabeling should be OK. > My kernel configuration contains the following for usb: > > # USB support > device uhci # UHCI PCI->USB interface > device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > device ugen # Generic > device uhid # "Human Interface Devices" > device ulpt # Printer > device umass # Disks/Mass storage - Requires scbus and > da (done) > device ums # Mouse > device uscanner # Scanners This should be more then enough for the kernel to get any ulpt compliant printer running. However your kernel doesn't know about *any* attached USB device. -- B.Walter BWCT http://www.bwct.de ticso@bwct.de info@bwct.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040329114000.GG26269>