Date: Mon, 1 Oct 2007 19:42:42 GMT From: Bartosz Polednia <bartoszp@op.pl> To: freebsd-gnats-submit@FreeBSD.org Subject: sparc64/116794: 7.0-current Sparc64 crash during creation of large file Message-ID: <200710011942.l91JggUj039315@www.freebsd.org> Resent-Message-ID: <200710011950.l91Jo10w093246@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 116794 >Category: sparc64 >Synopsis: 7.0-current Sparc64 crash during creation of large file >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-sparc64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Oct 01 19:50:01 GMT 2007 >Closed-Date: >Last-Modified: >Originator: Bartosz Polednia >Release: 7.0 CURRENT >Organization: >Environment: FreeBSD 7.0-CURRENT #1: Sun Sep 30 11:07:57 CEST 2007 root@u5.xxxxxx.com.pl:/usr/obj/usr/src/sys/GENERIC >Description: Sun Ultra 5 with 768 MB, 34 GB SCSI HDD + SymbiosLogic SCSI controller + 3C905 LAN + IDE CD-ROM Fresh installation from August snapshot shows no problems. After csup UP to 30.09.2007 and recompiling kernel simple dd if=/dev/zero of=/usr/tmp/plikzero bs=1M count=4096 crashes to db with (rewritten from console screen): panic() pmap_page_is_mapped() vm_page_fre_toq() vm_page_free() uma_small_free() zone_drain() zone_foreach() uma_reclaim() vm_pageout() fork_exit() fork_trampoline() buildworld also crashes and copying of distfiles directory from other station to U5 with scp -rp ...... crashes too. dmesg: GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #1: Sun Sep 30 11:07:57 CEST 2007 root@u5.xxxxxx.com.pl:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "tick" frequency 400000000 Hz quality 1000 real memory = 805306368 (768 MB) avail memory = 769114112 (733 MB) cpu0: Sun Microsystems UltraSparc-IIi Processor (400.00 MHz CPU) registered firmware set <isp_1000> registered firmware set <isp_1040> registered firmware set <isp_1040_it> registered firmware set <isp_1080> registered firmware set <isp_1080_it> registered firmware set <isp_12160> registered firmware set <isp_12160_it> registered firmware set <isp_2100> registered firmware set <isp_2200> registered firmware set <isp_2300> registered firmware set <isp_2322> registered firmware set <isp_2400> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, REGOPS_FUNC) nexus0: <Open Firmware Nexus device> pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0x1fe010000ff irq 2032,2030,2031,2021 on nexus0 pcib0: Sabre, impl 0, version 0, IGN 0x1f, bus A pcib0: [FILTER] pcib0: [FILTER] pcib0: [GIANT-LOCKED] pcib0: [ITHREAD] pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff pcib0: [FILTER] pci0: <OFW PCI bus> on pcib0 pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0 pci1: <OFW PCI bus> on pcib1 ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 1.0 on pci1 auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0 ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) scc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0 scc0: [FILTER] uart0: <SAB 82532 v3.2, channel A> on scc0 uart0: [FILTER] uart0: CTS oflow uart1: <SAB 82532 v3.2, channel B> on scc0 uart1: [FILTER] uart1: CTS oflow uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0 uart2: [FILTER] uart2: keyboard (1200,n,8,1) kbd0 at sunkbd0 uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0 uart3: [FILTER] ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x140030015c-0x140030015d,0x1400700000-0x140070000f irq 34 (no driver attached) ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached) eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) ebus0: <SUNW,CS4231> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1 miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> PHY 1 on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: Ethernet address: 08:00:20:f2:6c:ef hme0: [ITHREAD] machfb0: <ATI 3D Rage Pro> mem 0xe1000000-0xe1ffffff,0xe2000000-0xe2000fff at device 2.0 on pci1 machfb0: console machfb0: 16 MB aperture at 0xde1e4000, 1 KB registers at 0xe17ffc00 machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz, DSP machfb0: resolution 1152x900 at 8 bpp atapci0: <CMD 646 WDMA2 controller> port 0xc00000-0xc00007,0xc00008-0xc0000b,0xc00010-0xc00017,0xc00018-0xc0001b,0xc00020-0xc0002f at device 3.0 on pci1 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0 pci2: <OFW PCI bus> on pcib2 sym0: <875> port 0x400-0x4ff mem 0x2000-0x20ff,0x4000-0x4fff at device 1.0 on pci2 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: [GIANT-LOCKED] sym0: [ITHREAD] xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x800-0x87f mem 0x6000-0x607f at device 3.0 on pci2 miibus1: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> PHY 24 on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:50:da:44:ac:1b xl0: [ITHREAD] syscons0: <System console> on nexus0 syscons0: Unknown <16 virtual consoles, flags=0x300> Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle acd0: CDRW <HL-DT-ST CD-ROM GCR-8520B/1.00> at ata3-master PIO4 GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install. WARNING: WITNESS option enabled, expect reduced performance. da0 at sym0 bus 0 target 1 lun 0 da0: <NETAPP X245_HJURD036S10 NA02> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit) da0: Command Queueing Enabled da0: 35256MB (72205440 512 byte sectors: 255H 63S/T 4494C) Trying to mount root from ufs:/dev/da0a >How-To-Repeat: Just issue simply command: dd if=/dev/zero of=/tmp/plikzero bs=1M count=4096 >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200710011942.l91JggUj039315>