Date: Wed, 3 Jul 1996 17:31:20 -0400 (EDT) From: Ben <adept@cep.yale.edu> To: freebsd-mobile@freebsd.org Subject: TP701 w/ 3com 3c589B Message-ID: <Pine.LNX.3.91.960703172437.7227C-100000@www.cep.yale.edu>
next in thread | raw e-mail | index | archive | help
Hello folks.
I've upgraded from 2.1-R and am now running 2.2-960612-SNAP on my TP701
and I'm trying to install my 3c589B card using the PAO package. Catch is
I'm getting pretty frustrated trying to get it to work.
* I've played with the pccard.conf files but I've been unable to set the
ether line correctly for the Etherlink III. It seems that no
matter what I do the machine complains about an invalid MAC.
* Is the Etherlink III ep0 or nep0? The web page says nep0, the
docs say ep0.
* I'm using the completely kosher pccard.conf file from the
distribution(could this be my problem) and the error I get when
I start pccardd is as follows(I'm typing this in by hand so I'm
going to leave out the date on the left hand side)
mem=d0000
Card "3Com Corporation" ("3C589") matched "3Com Corporation" ("3C589")
Using I/O addr 0x300, size 16
Setting config reg at offs 0x10000 to 0x41
Reset time = 100 ms
Assigning I/O window 0, start 0x300, size 0x10 flags 0x7
Assign nep0, io 0x300 mem 0x0, 9 bytes irq 10, flags 10
3Com Corporation: Device not configured
driver allocation failed for 3Com Corporation
Now it does this with both nep0 and ep0. In addition, IRQ10 is
definitely free.
Anyone got any hints for me, or if anyone is running a 3com card, could
you mail me the pccard.conf and sysconfig that you're using?
Thanks!
Ben.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.91.960703172437.7227C-100000>